Hi,
same Problems here, with PI 2B
I just want to make a new Install with openHABian 2.0 and KNXd to connecto to BJ Powernet,
but the USB Port Detection does not work and also the knxtools are missing…
Sems the Install Script has Problems.
Only this files exist, no knxtool
[19:22:55] root@openHABianPi:/usr/local/bin# ls
knxd-findusb.sh openhabian-config pthsem-config
The Last Messages from the Installer Script
install_knxd_systemd.sh
checking whether __APPLE__ is declared... no
checking for gethostbyname_r... yes
EMI because of ft12
checking for LIBUSB... yes
EMI because of usb
checking for ev_run in -lev... no
configure: error: libev not found
make: *** No rule to make target 'clean'. Stop.
Here the USB device
/var/log/messsages
Jan 26 21:29:04 openHABianPi kernel: [ 3.737192] usb 1-1.5: new full-speed USB device number 4 using dwc_otg
Jan 26 21:29:04 openHABianPi kernel: [ 3.857222] usb 1-1.5: New USB device found, idVendor=145c, idProduct=1330
Jan 26 21:29:04 openHABianPi kernel: [ 3.859061] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan 26 21:29:04 openHABianPi kernel: [ 3.860873] usb 1-1.5: Product: KNX-USB Interface (Flush mounted)
Jan 26 21:29:04 openHABianPi kernel: [ 3.862714] usb 1-1.5: Manufacturer: Busch-Jaeger Elektro GmbH
Jan 26 21:29:04 openHABianPi kernel: [ 3.880048] hid-generic 0003:145C:1330.0001: hiddev0,hidraw0: USB HID v1.01 Device [Busch-Jaeger Elektro GmbH KNX-USB Interface (Flush mounted)] on usb-3f980000.usb-1.5/input0
Is there a new Install Script that will work with OpenHABian Image?
by
Boris