Dear, I have a config that was perfectly fine on the 2.1 for a year
Today I moved to the 2.2 on clean install (VM not RPI anymore) and I noticed that I only get half of the SNMP values.
Number B_Power_AC_Load "AC Power Load [%.0f W]" <energy> (PowerChart) { snmp="<[172.16.10.8:public:.1.3.6.1.4.1.21111.1.2.5.3.0:8000]" }
Number B_Power_PV_Sum "PV Sum [%.0f W]" <solarplant> (PowerChart)
Number B_Power_PV_String1 "PV Power1 [%.0f W]" <solarplant> (PowerChart2) { snmp="<[172.16.10.8:public:.1.3.6.1.4.1.21111.1.2.6.3.1.3.0:8100]" }
Number B_Power_PV_String2 "PV Power2 [%.0f W]" <solarplant> (PowerChart2) { snmp="<[172.16.10.8:public:.1.3.6.1.4.1.21111.1.2.6.3.1.3.1:8200]" }
Number B_Power_Battery_Current_Discharge "Battery Current Discharge [%.0f A]" <energy> { snmp="<[172.16.10.8:public:.1.3.6.1.4.1.21111.1.2.3.11.0:5100]" }
Number B_Power_Battery_Current_Charge "Battery Current Charge [%.0f A]" <energy> { snmp="<[172.16.10.8:public:.1.3.6.1.4.1.21111.1.2.3.9.0:5300]" }
Number B_Power_Battery_Voltage "Battery Voltage raw [%.0f V]" <energy> { snmp="<[172.16.10.8:public:.1.3.6.1.4.1.21111.1.2.3.5.0:5000]" }
Number B_Power_Grid_P1_Voltage_raw "Grid P1 Voltage raw [%.0f V]" <energy> { snmp="<[172.16.10.8:public:.1.3.6.1.4.1.21111.1.2.4.8.1.2.0:10000]" }
Number B_Power_Grid_P2_Voltage_raw "Grid P2 Voltage raw [%.0f V]" <energy> { snmp="<[172.16.10.8:public:.1.3.6.1.4.1.21111.1.2.4.8.1.2.1:10200]" }
Number B_Power_Grid_P3_Voltage_raw "Grid P2 Voltage raw [%.0f V]" <energy> { snmp="<[172.16.10.8:public:.1.3.6.1.4.1.21111.1.2.4.8.1.2.2:10300]" }
And It is quite random what I do not get after restart, I played with the pooling periods and that somehow affects what I do get or not. If all the GRID voltages are on 10000 I only get first not the other 2 phases. with 100ms delay I get all of them. But for some reason I cant get battery dischaarge no matter what I do.
Of course with the mib browser everithing works fine, and is supper responsive, and I can hammer inverter for data 3 times per sec.
What was changed in the 2.2 in the snmp?
How do I get to the binding log to see what does it do?