OpenHAB 2.4 is not starting anymore (Karaf) After i cleard the cache (that’s the only action i can remember that has influence on this problem) I get error (see below) 2018-12-24 18:50:51.002 [SEVERE] [org.apache.karaf.main.Main] - Could not launch framework java.lang.RuntimeException: Error init…

[image] rlkoshak: openhab-cli Hi Rich, Thanks it works sudo openhab-cli reset-ownership

If one file had bad permissions it is reasonable to assume you have many. How did you install? The answer can determine how best to fix this. I think there is a fix permissions option on openhab and am even more sure there is a similar option on openhabian-conf.

Hi Rich If remember correctly I installed OpenHAB 2.2 a long time ago whit APT Upgraded to 2.3 and then to 2.4 with APT OpenHAB itself was running fine, Only my Z-wave things where no longer recognised and some other “things” where off line See this post I tried to solve it by cleaning the cach…

OK, if you installed using apt then there is an option on openhab-cli to fix the permissions I believe. I’ve no idea how the permissions got mangled in the first place. You could fix it by hand with a command like sudo chown -R openhab:openhab /var/lib/openhab2

I had the same… and tried all the above. That appeared not enough. I finally could solve it by reinstalling Openhab2 using APT: sudo apt-get install openhab2 --reinstall sudo apt-get install openhab2-addons --reinstall I do not use old addons, but you might also do: sudo apt-get install openhab…

I want to say that i had this exact issue after doing a clear cache and thanfully this thread got me going again. Thank you!

Exactly the same here (using 2.5.0 M6 and getting ready to go to stable). Thanks all.

I have a similar issue, maybe the same. In the log it says: 2019-12-22 22:53:18.186 [SCHWERWIEGEND] [org.apache.karaf.main.Main] - Could not launch framework java.lang.RuntimeException: Error initializing storage. at org.eclipse.osgi.internal.framework.EquinoxContainer.<init>(EquinoxContainer.jav…

After switching between the testing build and another snapshot the error seems to be gone and paper ui and habpanel etc. are accessible again and everything seems to load properly. I dont know what I did (except that I tried many commands from dozens of threads here in this forum) but in the end mos…

Ditto here too, same issue after clearing cache and started with upgrading to 2.5 and the new email binding not working. Short version: clearing cache and then resetting permissions worked without needing a reinstall. Luckily, … I had -just- added the Amanda backup procedures before rebooting, bu…

The issue re-appeared two weeks ago suddenly (I haven’t updated/changed anything). I was about to give up but then I installed the latest stable version and restarted the service. Surprisingly everything was fine again. I wouldn’t say this is solved forever as it appeared from time to time in the p…