Hello, I think i can solve this for you -
I followed this instructions set for zensys
I then reached out to AEON for advice also - Pls see answer here
""Ticket: XXXX
It has an issue with Group association, there is one quick way to fix this, is to use your Z-Stick Gen5 manual pair method which should assign the proper group association.
- Unpair HEM Gen5 from your Z-Stick Gen5.
- Unplug your Z-Stick Gen5
- Tap the button on Z-Stick Gen5 - slow blue blinking LED
- Tap the button on HEM Gen5
- Plug the Z-Stick Gen5 and connect it back into OpenHAB
This should allow the proper group association to function have the HEM Gen5 automatically report.
Alternatively, you can use Zensys tools to pair your HEM Gen5 using similar steps to the above, which should do about the same thing and then move it over to OpenHAB afterwards. “”
I had done thing the first way and it didnt work, so I went the Zensys method (alternative). I plugged the AEON Zwave stick in my Laptop - went to remove + re - add and it seems to configured fully. Now i can play around with all variables. I use 101 at 5 sec intervals with 1794 to get all Wattage and 102/112 with setting for Kwh. all seems to work perfectly now.
Hope that helps