Hi there,
I can’t solve my issue with easymeter and iec6205621 binding. Attached you’ll find the debug message.
21:11:37.744 [DEBUG] [meter.internal.Iec6205621MeterBinding] - Read meter: meter1; /dev/ttyUSB0
21:11:37.758 [ERROR] [inding.iec6205621meter.internal.Meter] - Failed to open serial port /dev/ttyUSB0: Serial port with given name does not exist
If I try to read the interface with cat /dev/ttyUSB0 I get this values and it looks ok, I think!
/ESY5Q3DA1002 V3.04
1-0:0.0.0255(1ESY1160071778)
1-0:1.8.0255(00011386.4918122kWh)
1-0:21.7.0255(000201.16W)
1-0:41.7.0255(000055.47W)
1-0:61.7.0255(000075.67W)
1-0:1.7.0255(000332.30W)
1-0:96.5.5255(80)
0-0:96.1.255*255(1ESY1160071778)
!
Have someone some hints?
Thank you.
BR
Knut