I’m on OH 4.1.0 and had to replace my TI CC2531EMK Zigbee Coordinator for stability reasons and tried to replace it with a Sonoff Dongle Plus V2 (ZBDongle-E). The documentation mentions two different firmwares ( this one and this one ). For the actual flashing I’m using this web flasher , which worked…

Update 2: The itead-firmware worked fine. It seems as if, after trying out a different firmware, the thing has to be removed and re-created.

[image] Cplant: The documentation mentions two different firmwares Which documentation? Can you submit a PR to change it so others do not get confused if it is openHAB documentation? I would not use non genuine firmware, stick with the correct itead/sonoff one and as you did you need to make…

[image] matt1: Can you submit a PR to change it so others do not get confused if it is openHAB documentation? I’d love to do that, since I really enjoy improving documentations, mostly because (being a non-pro) I’d like to spare others the frustration I went through, and to lower the overall …

[image] matt1: Also yes I suspect if you ever update the firmware you will have to pull devices out of the walls and push the connect buttons and possibly start over. Zigbee stores the hardware codes on the dongle so wiping the dongle will mean you need to start over. Minor clarification: if …

Apologies for the imprecision in my initial post. What I meant: When you get a new USB Coordinator, and try out different firmwares (which is what I did unfortunately), and wonder why the coordinator won’t go online in OH even if you flash the official itead firmware, you have to remove the thing a…

a new commit has been made a week ago to actually enable this [image] Bumped zsmartsystems.version 1.4.12 -> 1.4.13 to allow support for mo… ·... …dern ezsp v12. (#815) Signed-off-by: Roman Zavalov

Cool, very helpful for those only starting with Zigbee, as I found this really confusing. :slight_smile:

openHAB Community

SONOFF Zigbee 3.0 USB Dongle Plus V2 - Which firmware to use?

Add-ons Bindings

Moortu (kris) February 20, 2024, 8:39pm 7

a new commit has been made a week ago to actually enable this