Hi all, Since my OH 2.4 upgrade (from 2.3), I have an strange issue with my two FGD212 devices. On this FGD212 device (node 56), OH2 doesn’t detect the ON/OFF return state. Indeed when I turn ON or OFF the physical switch linked to this FGD212 device, OH2 get no events (no events in events.log fil…

The database entry for that device has changed, so if you upgraded to the snapshot but did not delete and readd your device thing and adopted the new channels you may see that behaviour. The channel for switch and dimmer itemtype is now switch_dimmer1 and is instantly updated through the binding an…

Hi @sihui , I just deleted my FGD212 things from PaperUI (Configuration > Things > Trash/Bin icon) and after I ran a Zwave things scan in Paper UI (Inbox > Scan icon > Zwave binding) to (re)add my Zwave 51 and 56 nodes. My items configuration is: Dimmer Dimmer_SalonPlafonnier "Plafonnier salon…

[image] nokyyz: What is wrong ? Don’t know :smiley: This is my log for updates from the GUI: 2018-11-17 10:07:07.065 [ome.event.ItemCommandEvent] - Item 'FibFGD212_1_Sw' received command ON 2018-11-17 10:07:07.737 [nt.ItemStatePredictedEvent] - FibFGD212_1_Sw predicted to become ON 2018-11-…

I don’t think the configuration parameters are wrong because all was fine with OH 2.3. The upgrade can’t have updated the configuration parameters. What is your OH version ?

You must set association group 1 and 2 to Controller.

[image] nokyyz: The upgrade can’t have updated the configuration parameters. But the config parameters in the database could have changed and for example if you had a parameter which is now out of bounds you need to set it to a proper value. [image] nokyyz: What is your OH version ? I…

[image] OMR: and 2 Group 2 does not go to the controller at all, that one is for the world outside of openHAB. [grafik]

[image] sihui: Group 2 does not go to the controller at all, that one is for the world outside of openHAB. Well, if you associate it to the controller it does, and viola, local state changes appear in OH2 again. See this post.

[image] OMR: local state changes appear in OH2 again I don’t have Group 2 set and it works :smiley:

Yah, it used to work without for me as well, but it broke in one of my SNAPSHOT updates in late October early November. Never found out why. It also happened to an Nexa/Everspring on/off wall switch I have. One nice side effect after setting AG1 and AG2 of that device to Controller was, beside that …

openHAB Community

Strange issues with Fibaro FGD212 dimmer 2 on OH 2.4-snapshot

Add-ons Bindings

OMR (Ole Morten Rønning) November 18, 2018, 11:18am 9

Well, if you associate it to the controller it does, and viola, local state changes appear in OH2 again.
See this post.