Suggestion for smart plug with timer

[alda1 (Alex Needle)]

ok, on the end I decided to try install a mqqt
I used this guide

[OH3] MQTT Setup and Configuration

Overview In order to use MQTT devices, the following is required: An MQTT broker installed MQTT Binding installed in openHAB MQTT Bridge Thing configured in openHAB This tutorial was written with openHAB3 running on a headless Raspberry Pi 3B with Raspberry Pi OS, with SSH access. Method 1. Install the MQTT broker Install Mosquitto On the Raspberry Pi, perform the following commands to install Mosquitto, and ensure it runs when re-starting the Pi: sudo apt install mosquitto sudo systemc…

Mqqt is online. Now I must search for device for tests. Maybe I will flash some arduino board with Tasmota or Shelly 1.