I have a Raspberry Pi 3 b+, the latest Openhabian and RazBerry as Z-Wave Server.
Then I have instralled z-way an can access wit port 8083.
I have include an aeotec windows/door switch and with the UI from z-way and the windows switch works fine. (a half second after I open der windows sensor I see the result in the UI)
Now I want to see the result also in OpenHab.
I have installed the binding z-way and have set my username and password in the configuration.
The z-way server goes online and I found the windows switch in my inbox and import the switch.
But if I change the windows switch from e.g. closed to open, the z-way UI (:8083) react immedeatly, but Openhab not (nothing to see in the Openhab Log Viewer)
I have also tried with Z-Wave and delete Z-Way with the same negativ result.
You can either use the zway binding with a running zway serve
If I use the z-way binding, how can I check, why the signal e.g. from windows closed and open not reach OpenHAB? Is the a log file, how I can read the reason?
22:19:20.208 [INFO ] [smarthome.event.ItemStateChangedEvent] - zway_zwayDevice_192_168_180_26_4_switchControl_ZWayVDev_zway_Remote_4_0_0_B changed from ON to OFF
22:20:20.868 [INFO ] [smarthome.event.ItemStateChangedEvent] - zway_zwayDevice_192_168_180_26_4_switchControl_ZWayVDev_zway_Remote_4_0_0_B changed from OFF to ON
22:21:21.506 [INFO ] [smarthome.event.ItemStateChangedEvent] - zway_zwayDevice_192_168_180_26_4_switchControl_ZWayVDev_zway_Remote_4_0_0_B changed from ON to OFF
22:22:22.122 [INFO ] [smarthome.event.ItemStateChangedEvent] - zway_zwayDevice_192_168_180_26_4_switchControl_ZWayVDev_zway_Remote_4_0_0_B changed from OFF to ON
So I see, that the status from the switch.
I have set the “polling intervall” to the minimum at 60 seconds in the “Z-Way Binding”, so the status change from the windows switch is to late (see the minutes 19, 20, 21 and 22)
I want the information immediate, that the windows is opened.
Can I do this with the Z-Way Server or must I switch to “Z-Wave Binding”?
I have never used the zway binding but with all bindings there should be immediate reaction on switch changes within a couple of milliseconds without the need of polling.