Hi, DSM 7.0 is now available for some Synology NAS. I am aware that there are limitations with USB devices. It seems that the following commands, after a reboot, will allow zwave USB sticks to work again: modprobe usbserial modprobe ftdi_sio modprobe cdc-acm Are there any positive experiences …

I confirm that the Aeotec Gen-5 is recognized when running DSM 7.0 providing you executed the three modprob commands mentioned earlier. Its device name is /dev/ttyACMx (x=1 for my setup since the Deconz USB stick appears as /dev/ttyACM0). The Aeotec S2 required extra modules that are not available t…

I also have DSM 7.0 installed since the first Beta came out. Z-Wave Stick from zwave.me and works great after the 3 commands.

Hi Do you use “execute container using high privilege” when running the docker container ? I can not get it to work unless I do that and I did not use to need that under DSM 6.2

I changed the permissions for the zwave and zigbee devices (/dev/ttyACMx) to allow the container to get access to the devices. But you have to do it each time you unplug/plug the USB sticks and after the boot. Not really optimal. But more secure than giving privilege mode to the container.

Hi Yes I think I did changed the permissions. When I ssh into the NAS and do. #####@####:~$ ls -l /dev/ttyA* crwxrwxrwx 1 openhab openhab 166, 0 Jul 12 07:35 /dev/ttyACM0 It looks like its is changed. I also tried setting the user and group to root with full premissions this does not work eit…

I think you can make this more comfortable by using symlinks [image] Docker install on Synology : how to create use with no home and no shell Installation Syntax completion and error checking works for me. These are my VSC workspace settings for the modified p…

I have the following permission on the synology host: *******13:00]% ll /dev/ttyACM crw-rw-rw- 1 root root 166, 0 Jun 30 08:33 /dev/ttyACM0 crw-rw-rw- 1 root root 166, 1 Jul 6 18:30 /dev/ttyACM1 I created the container using the following command: sudo docker run --name openhab --net=ho…

Concerning the access rights associated to a USB device, I will investigate the solution explained here: [image] Synology USB configuration (udev rules) Server Following all the recent work that people have done to get the serial drivers working on the Synolog…

It looks like I go it working now. I am a bit unsure what made it work, I think there was something with the group that was wrong. I used your “sudo docker run …” command and that made the \dev\ttyACM0 work but because my openhab user does not have id 9001 I need set the -e “USER_ID=1042” -e “GROUP_…

Synology DSM 7.0 & zwave USB

Setup, Configuration and Use Installation

gd35 (Gd35) July 12, 2021, 11:14am 18

Concerning the access rights associated to a USB device, I will investigate the solution explained here:

May be this will solve the permission issue at boot time and when you plug/unplug the USB stick. Hope it works for DSM7.0.