Hello, I am running an Openhab on a Raspberry Pi using openhabian in Version 3.0.0 Release Build. When trying to upgrade the system via openhabian-config I receive the following errors, which seems mainly beeing caused by errors reaching IP Adress 93.93.128.193. But I can ping the adress: 2021-12…

[image] janow: Seems my installation is looking to the wrong raspberry repositories? Yes. It’s changed since 3.0 [image] openHAB 3.0.2 Patch Release and the Sunset of Bintray Announcements Dear all, We have today published the openHAB patch release 3.0…

Thanks, rossko57. Do I understand right that there is no chance to upgrade the system any more and I need to re-install it?

I had the same problems. You need to do this Add the repository key wget -qO - 'https://openhab.jfrog.io/artifactory/api/gpg/key/public' | sudo apt-key add - Add the HTTPS transport for APT sudo apt-get install apt-transport-https Add the repository echo 'deb https://openhab.jfrog.io/artif…

Hi @JAFone , many thanks for your help. I followed your instructions. When using sudo apt-get update the last two entries changed the repository link and the errors are gone. But still getting complains about the first two repositories: Index of /debian buster InRelease and Index of /raspbian buste…

Hi, You might want to run this apt-get update --allow-releaseinfo-change apt-get update apt-get upgrade --fix-missing at the end i also did a apt-get dist-upgrade Then ran the openhabian-config and upgraded My system is now at 3.2.0 //JAF

Especially made an account to thank you all! @JAFone summarization fixed the issue for me! Also had to apply this fix in order to get everything working: [image] Corrupt installation after updating from 3.1 (M5) to 3.2.M4 Installation I working on openhabian a…

Hi, Seems like i am very late to the party, and i am trying to follow your steps to update, but i can’t get past the first step, adding the repo key. the console just hangs when i enter that command. no activity… can you confirm if your solution should still work?

the problem is not the same. In this case we have to wait for the repo to go up.

thank you for pointing that out for me :slight_smile:

Updating Openhab 3 Version blw. 3.0.2 via upgrade fails with errors (reaching 93.93.128.193)

Setup, Configuration and Use Installation

rossko57 (Rossko57) December 31, 2021, 12:05pm 2

Yes. It’s changed since 3.0