Platform information: Raspberry Pi 4 Hardware: CPUArchitecture/RAM/storage OS: what OS is used and which version Java Runtime Environment: which java platform is used and what version openHAB version: Issue of the topic: please be detailed explaining your issue Please post configurations (if app…

Welcome! guess your problem is the item toggles between on and off with each event. Think profiles should help you: [image] Items a vendor and technology agnostic open source automation software for your home

[image] kempa007: I can see that openhab see the change in the logs It might be helpful if we could see that too. How are your Items configured? Have you looked at other WAGO users posts? I think WAGO usually ends up configured with different status reporting and command actioning register…

Hi, thanks for the replay. Yesterday I wrote a post from my phone, so. As I said I’m not fluent with Openhab yet. I use only Paper UI for testing purposes. So I have three Things: Modbus Data, Modbus TCP Slave and Modbuss Poller. Modbus TCP Slave is just for conneciton, so it works perfectly. I wa…

sorry for that, but new users can only add one photo per post: ModbusDATA Thing: [mb_data]

ModbusPoller Thing: [mb_poller]

In My wago PLC I detect change of Modbus_OUT varrible which is writable (at 32768 coil) and use internal PLC logic to create puleses that triger digital outputs (lights). Poller reads first coil at 0 modbus address (Modbus_IN variable). [mb_wago_registers]

Quite possible, I will check it later. For now I saw that on papaer UI I can only change from default to follow, which is “destroing” the behavior of the switching logic. How can I use: rawbutton-toggle-switch in Paper UI?

Change your Item option “enforce autoupdate”, that is the last thing you want. As per binding docs, you most likely want to inhibit autoupdate, veto it. Then show us another events.log and try to explain what happens, and what you would like to happen instead.

Veto auto updates changed only that I do not need quickly double click to change state of the lighit after switching on the wall. So logs looks the same: here I switched off by openhab: 2020-10-09 11:24:23.299 [ome.event.ItemCommandEvent] - Item ‘Stan_swiatla’ received command OFF 2020-10-09 11:…

Well, openHAB sends 0 for OFF or 1 for ON over Modbus. Your lights want a toggle i.e. a pulse for ON, a pulse for OFF? You could use a writeTransform on your modbus to send 1 for any command.

openHAB Community

Wago PLC with modbus

Setup, Configuration and Use Beginners

kempa007 (Przemek) October 9, 2020, 8:34am 6

ModbusPoller Thing: