Warnings after Update of Homematic IP BSL Switch

Add-ons Bindings
1

Hello!
I own an Homematic IP BSL and everything worked very good and without Problems (as prooved by Log). BSL was integrated by using several items and mentioned in rules. I made an update vom 1.x to 2.x of the firmware and now there are the following warnings in the Log

==> /var/log/openhab/openhab.log <==

2024-05-16 16:04:04.593 [WARN ] [ternal.handler.HomematicThingHandler] - Channel not found for datapoint ‘001A5F298D31FA:7#COLOR_BEHAVIOUR_STATUS’

2024-05-16 16:04:04.616 [WARN ] [ternal.handler.HomematicThingHandler] - Channel not found for datapoint ‘001A5F298D31FA:7#COLOR_BEHAVIOUR’

2024-05-16 16:04:04.628 [WARN ] [ternal.handler.HomematicThingHandler] - Channel not found for datapoint ‘001A5F298D31FA:8#COLOR_BEHAVIOUR_STATUS’

2024-05-16 16:04:04.633 [WARN ] [ternal.handler.HomematicThingHandler] - Channel not found for datapoint ‘001A5F298D31FA:8#COLOR_BEHAVIOUR’

2024-05-16 16:04:04.664 [WARN ] [ternal.handler.HomematicThingHandler] - Channel not found for datapoint ‘001A5F298D31FA:11#COLOR_BEHAVIOUR_STATUS’

2024-05-16 16:04:04.668 [WARN ] [ternal.handler.HomematicThingHandler] - Channel not found for datapoint ‘001A5F298D31FA:11#COLOR_BEHAVIOUR’

2024-05-16 16:04:04.680 [WARN ] [ternal.handler.HomematicThingHandler] - Channel not found for datapoint ‘001A5F298D31FA:12#COLOR_BEHAVIOUR_STATUS’

2024-05-16 16:04:04.685 [WARN ] [ternal.handler.HomematicThingHandler] - Channel not found for datapoint ‘001A5F298D31FA:12#COLOR_BEHAVIOUR’

I never used these datapoint explicitly in my setup.

How can I get rid off these warnings without having to rebuild the thing and all items and rules again?

Thanks in advance for any suggestions,
Jürgen :slight_smile:

2

I‘m using the same device, and after the update to 2.0.2 I noticed that nothing (-> setting colors) worked anymore for me.

Checking the CCU I noticed that setting colors required an additional channel (called „Modus“ in the CCU) to be set. Before, this was not needed, but this new channel allows blinking, flashing or solid light and this needs to be set.

Maybe this helps as it solved things for me.