12:23:58.505 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_luminance
12:23:58.506 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Processing event as channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_luminance DecimalType
12:23:58.506 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_binary
12:23:58.507 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_binary
12:23:58.507 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:battery-level
12:23:58.508 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:battery-level
12:23:58.508 [DEBUG] [ssage.ApplicationCommandMessageClass] - Transaction not completed: node address inconsistent.
12:23:59.324 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 00 04 00 09 03 80 03 64 1F
12:23:59.327 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
12:23:59.328 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 09 00 04 00 09 03 80 03 64 1F
12:23:59.329 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 09 00 04 00 09 03 80 03 64 1F
12:23:59.331 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class = ApplicationCommandHandler (0x04), type = Request (0x00), payload = 00 09 03 80 03 64
12:23:59.332 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 9: Application Command Request (ALIVE:DONE)
12:23:59.333 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 9: Incoming command class BATTERY
12:23:59.333 [DEBUG] [ommandclass.ZWaveBatteryCommandClass] - NODE 9: Received Battery Request
12:23:59.333 [DEBUG] [ommandclass.ZWaveBatteryCommandClass] - NODE 9: Battery report value = 100
12:23:59.334 [DEBUG] [ve.internal.protocol.ZWaveController] - Notifying event listeners: ZWaveCommandClassValueEvent
12:23:59.334 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Got an event from Z-Wave network: ZWaveCommandClassValueEvent
12:23:59.335 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Got a value event from Z-Wave network, endpoint = 0, command class = BATTERY, value = 100
12:23:59.335 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:alarm_general
12:23:59.335 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:alarm_general
12:23:59.344 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_relhumidity
12:23:59.345 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_relhumidity
12:23:59.345 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_ultraviolet
12:23:59.346 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_ultraviolet
12:23:59.346 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_temperature
12:23:59.346 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_temperature
12:23:59.347 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_luminance
12:23:59.347 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_luminance
12:23:59.348 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_binary
12:23:59.348 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_binary
12:23:59.348 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:battery-level
12:23:59.349 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Processing event as channel zwave:aeon_zw100_00_000:15348538564:node9:battery-level PercentType
12:23:59.349 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - Updating zwave:aeon_zw100_00_000:15348538564:node9:battery-level to 100
12:23:59.351 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:battery-level
12:23:59.352 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Processing event as channel zwave:aeon_zw100_00_000:15348538564:node9:battery-level PercentType
12:23:59.352 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - Updating zwave:aeon_zw100_00_000:15348538564:node9:battery-level to 100
12:23:59.354 [DEBUG] [ssage.ApplicationCommandMessageClass] - Transaction not completed: node address inconsistent.
12:23:59.614 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 0C 00 04 00 09 06 31 05 03 0A 00 18 DD
12:23:59.617 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
12:23:59.618 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 0C 00 04 00 09 06 31 05 03 0A 00 18 DD
12:23:59.619 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 0C 00 04 00 09 06 31 05 03 0A 00 18 DD
12:23:59.620 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class = ApplicationCommandHandler (0x04), type = Request (0x00), payload = 00 09 06 31 05 03 0A 00 18
12:23:59.621 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 9: Application Command Request (ALIVE:DONE)
12:23:59.622 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 9: Incoming command class SENSOR_MULTILEVEL
12:23:59.622 [DEBUG] [ss.ZWaveMultiLevelSensorCommandClass] - NODE 9: Received Sensor Multi Level Request
12:23:59.622 [DEBUG] [ss.ZWaveMultiLevelSensorCommandClass] - NODE 9: Sensor Multi Level REPORT received
12:23:59.623 [DEBUG] [ss.ZWaveMultiLevelSensorCommandClass] - NODE 9: Sensor Type = Luminance(3), Scale = 1
12:23:59.623 [DEBUG] [ss.ZWaveMultiLevelSensorCommandClass] - NODE 9: Sensor Value = 24
12:23:59.624 [DEBUG] [ve.internal.protocol.ZWaveController] - Notifying event listeners: ZWaveMultiLevelSensorValueEvent
12:23:59.624 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Got an event from Z-Wave network: ZWaveMultiLevelSensorValueEvent
12:23:59.625 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Got a value event from Z-Wave network, endpoint = 0, command class = SENSOR_MULTILEVEL, value = 24
12:23:59.626 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:alarm_general
12:23:59.626 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:alarm_general
12:23:59.626 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_relhumidity
12:23:59.627 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Processing event as channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_relhumidity DecimalType
12:23:59.627 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_relhumidity
12:23:59.628 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Processing event as channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_relhumidity DecimalType
12:23:59.629 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_ultraviolet
12:23:59.629 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Processing event as channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_ultraviolet DecimalType
12:23:59.630 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_ultraviolet
12:23:59.631 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Processing event as channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_ultraviolet DecimalType
12:23:59.631 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_temperature
12:23:59.632 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Processing event as channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_temperature DecimalType
12:23:59.634 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_temperature
12:23:59.635 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Processing event as channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_temperature DecimalType
12:23:59.636 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_luminance
12:23:59.637 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Processing event as channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_luminance DecimalType
12:23:59.638 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - Updating zwave:aeon_zw100_00_000:15348538564:node9:sensor_luminance to 24
12:23:59.643 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_luminance
12:23:59.643 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Processing event as channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_luminance DecimalType
12:23:59.644 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - Updating zwave:aeon_zw100_00_000:15348538564:node9:sensor_luminance to 24
12:23:59.644 [INFO ] [marthome.event.ItemStateChangedEvent] - zwave_aeon_zw100_00_000_15348538564_node9_sensor_luminance changed from 30 to 24
12:23:59.646 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_binary
12:23:59.646 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_binary
12:23:59.647 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:battery-level
12:23:59.647 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:battery-level
12:23:59.648 [DEBUG] [ssage.ApplicationCommandMessageClass] - Transaction not completed: node address inconsistent.
12:23:59.654 [INFO ] [marthome.event.ItemStateChangedEvent] - MS1_Lux changed from 30 to 24
12:23:59.748 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 0B 00 04 00 09 05 31 05 1B 01 00 D2
12:23:59.751 [DEBUG] [ve.internal.protocol.ZWaveController] - Receive queue TAKE: Length=0
12:23:59.752 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 0B 00 04 00 09 05 31 05 1B 01 00 D2
12:23:59.753 [DEBUG] [ve.internal.protocol.ZWaveController] - Process Message = 01 0B 00 04 00 09 05 31 05 1B 01 00 D2
12:23:59.754 [DEBUG] [ve.internal.protocol.ZWaveController] - Message: class = ApplicationCommandHandler (0x04), type = Request (0x00), payload = 00 09 05 31 05 1B 01 00
12:23:59.755 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 9: Application Command Request (ALIVE:DONE)
12:23:59.756 [DEBUG] [ssage.ApplicationCommandMessageClass] - NODE 9: Incoming command class SENSOR_MULTILEVEL
12:23:59.756 [DEBUG] [ss.ZWaveMultiLevelSensorCommandClass] - NODE 9: Received Sensor Multi Level Request
12:23:59.757 [DEBUG] [ss.ZWaveMultiLevelSensorCommandClass] - NODE 9: Sensor Multi Level REPORT received
12:23:59.757 [DEBUG] [ss.ZWaveMultiLevelSensorCommandClass] - NODE 9: Sensor Type = Ultraviolet(27), Scale = 0
12:23:59.758 [DEBUG] [ss.ZWaveMultiLevelSensorCommandClass] - NODE 9: Sensor Value = 0E+1
12:23:59.758 [DEBUG] [ve.internal.protocol.ZWaveController] - Notifying event listeners: ZWaveMultiLevelSensorValueEvent
12:23:59.759 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Got an event from Z-Wave network: ZWaveMultiLevelSensorValueEvent
12:23:59.760 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Got a value event from Z-Wave network, endpoint = 0, command class = SENSOR_MULTILEVEL, value = 0E+1
12:23:59.762 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:alarm_general
12:23:59.773 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:alarm_general
12:23:59.773 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_relhumidity
12:23:59.774 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Processing event as channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_relhumidity DecimalType
12:23:59.774 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_relhumidity
12:23:59.774 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Processing event as channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_relhumidity DecimalType
12:23:59.775 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_ultraviolet
12:23:59.775 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Processing event as channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_ultraviolet DecimalType
12:23:59.775 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - Updating zwave:aeon_zw100_00_000:15348538564:node9:sensor_ultraviolet to 0
12:23:59.777 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_ultraviolet
12:23:59.778 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Processing event as channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_ultraviolet DecimalType
12:23:59.778 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - Updating zwave:aeon_zw100_00_000:15348538564:node9:sensor_ultraviolet to 0
12:23:59.780 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_temperature
12:23:59.780 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Processing event as channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_temperature DecimalType
12:23:59.781 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_temperature
12:23:59.781 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Processing event as channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_temperature DecimalType
12:23:59.782 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_luminance
12:23:59.792 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Processing event as channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_luminance DecimalType
12:23:59.793 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_luminance
12:23:59.793 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Processing event as channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_luminance DecimalType
12:23:59.794 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_binary
12:23:59.794 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:sensor_binary
12:23:59.795 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:battery-level
12:23:59.795 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 9: Checking channel zwave:aeon_zw100_00_000:15348538564:node9:battery-level
12:23:59.796 [DEBUG] [ssage.ApplicationCommandMessageClass] - Transaction not completed: node address inconsistent.Thanks. I’ve summarised this below…
Motion Alarm
01 10 00 04 00 09 0A 71 05 00 00 00 FF 07 08 00 00 6C
Alarm report - 0 = 0, source=0, event=8, status=255
Motion Alarm Timeout
01 10 00 04 00 09 0A 71 05 00 00 00 FF 07 00 00 00 64
Alarm report - 0 = 0, source=0, event=0, status=255
Tamper Alarm
01 10 00 04 00 09 0A 71 05 00 00 00 FF 07 08 00 00 6C
Alarm report - 0 = 0, source=0, event=8, status=255
Tamper Alarm End
01 10 00 04 00 09 0A 71 05 00 00 00 FF 07 00 00 00 64
Alarm report - 0 = 0, source=0, event=0, status=255
So, from this it seems there’s no way to tell the difference between the tamper and motion alarms… Anyway, that aside I’ll look to update the class based on this…
I know I’m a couple of days late here but I get a SENSOR_BINARY command for the motion and an ALARM command for the tamper alarm on my zw100.
How are people getting ALARM reports for the motion sensor?
mhhh i definately get an alarm report on motion.
i posted that under your log in the zwave text thread.
any chance to find out firmware verison of the device?
also the motion gets no update on the item/channel I use on the sitemap
uh
remove from network 
here i also noted to have a different alarm type
^whats yout setting for parameter5? (or maybe a screenshot of all settings?) 
I’ve not updated the implementation of the command class yet as I’m not convinced by what I saw in the logs. It would be good to get a log from another device or two that support the V3 Alarm class. The only other device I’ve seen (WADWAZ I think) was slightly different, so I need to understand how the different fields are used…
ok I changed parameter 5
now I do get SENSOR BINARY on motion
also channel/item now works with parameter 5 changed to catch the motion…
however like many other items this status is only updated on UI and gets lost when you refresh (f5)
funny
with parameter 5 basic set mine did send ALARM and not Sensor binary
odd
They should be from the device, but I can’t be 100% sure… The device configuration is read during startup, so the configuration you see should be synchronised.
to what I have observed… both can happen and you cant tell exactly if that device is synched or not
eg. for that sensor I have a temp offset… sometimes habmin shows the offset
sometimes not
btw… description says to make that offset in x.x values for C … thats also not true
e.g. if you want - 2.1 C offset you must enter -21
FWIW my parameter 5 is on ‘Send Sensor Binary Report CC’.
Also it is my experience, that then you change configuration parameters, you really have to press the little button on the back a couple of times, and watch the debug log closely to verify the changes are persisted. And this way you don’t have to wait for w wakeup.
That seems to be my anecdotal experience too. I was sure I set the sensitivity for the PIR down to 3 (and it at least seems less sensitive than when it came out the box as 5) but HABmin shows it as 5.
In habmin1 the setting actually was marked yellow until successfully commited. At least I think so.
To be clear though, this should only be required if you don’t want to wait for the wakeup. It’s not however how Z-Wave is designed to work, but if you want to run your system like this, then it’s up to you - it’s not an issue with the system…
It would be worth checking the log. As I think I said above, HABmin does a sync on startup, so in theory it should be synced unless something is changing the configuration outside of HABmin. If it’s not synced, I’d like to see the log during the configuration readback so that we can solve the problem and ensure things are working as they should.
Yes - this is correct. I suggested to also implement this in ESH as well, but it was initially rejected. Something was implemented recently though, so I’ll take another look at this in the medium future to see if it can be added. It’s not normally an issue except with battery devices, but it is very nice to see…
Hmmm - you believe you can what (I’m not sure what this is in reference to - sorry)?
The main reason I hadn’t really mentioned it before is that I don’t have a way to independently verify the config to compare with the binding. Is there some free software I can use to do that? OH is my first foray into ZWave so I don’t really know what other controller software is out there.