Is there a way to prevents logging events relating to “serial_sof” ? My event log is constantly updated with lines such as: [vent.ItemStateChangedEvent] - zwave_serial_zstick_0abcsefgh_serial_sof changed from XXXX to YYYY Everything works perfectly but I don’t have any use for these messages that …

If you delete the item, you won’t have ItemStateChangedEvents.

[image] openHAB - Filtering event logs Tutorials & Examples Simple string filtering on the event log. Useful for filtering out high change items that don’t need constant log visibility. Re-posting this as it’s own thread on the recommendation of other members.…

Thank you, that did the trick! I was not aware that the sof and ack channels were just counters. Due to the lack of documentation for the Aeotec Z-Wave USB stick I was under the impression that they were necessary for the correct operation of the binding.

[image] Catskinner: I was not aware that the sof and ack channels were just counters. Due to the lack of documentation for the Aeotec Z-Wave USB stick I was under the impression that they were necessary for the correct operation of the binding. [image] Channels - ZWave - Bindings T…

Z-Wave & event log = too much information

Setup, Configuration and Use Beginners

vzorglub (Vincent Regaud) September 30, 2018, 9:12pm 3