Hello all, I’ve been working with Sonoff ZigBee Bridge running Tasmota 12.4.0. My current version of openHAB is 3.3.0 Release Build. I am able to get the data I need from the connected sensors. However, I get “Executing the JSONPATH-transformation failed: Invalid path” in the log. See below. For th…

Thank you @Rolli . Your syntax worked. My events log is “Warning” free. Cheers, Bob

[image] MQTT 2.5 M1+ How to implement the equivalent to MQTT1 REGEX filters Solutions Problem In the MQTT1 binding there was a feature that let us filter messages published to a given topic and only pass those that match a given REGEX to the transformation and/…

Thank you, @hafniumzinc , I think I get the concept, but I fail on the syntax/application. For my code above: stateTopic: tele/ZbBridge/Temp_Bob_BedRM/SENSOR transformationPattern: JSONPATH:$.ZbReceived.Temp_Bob_BedRM.Humidity Do I add the REGEX before the transformationPattern like this: transfo…

What does the JSON data coming in look like? If it is something like this: {"ZbReceived":{"0x2B14":{"Device":"0x2B14","Contact":1,"Endpoint":1,"LinkQuality":42}}} The JSONPATH would be like this: JSONPATH$.ZbReceived.0x2B14.Contact Above is from: Json from Tasmota for window sensor - how to I …

Hello @ubeaut . I have some SNZB-04 and they work fine with no errors in the log. The issue I am having is with the SNZB-02:Temp/Hum. These have both temperature and humidity. However, only report one at a time. Console output Sonoff ZbBridge sending Humidity 16:31:42.703 MQT: tele/ZbBridge/Temp_B…

[image] Bob_Barbagallo: My goal is to eliminate the error This isn’t an error, only a warning - you can safely ignore it. The thread linked in the second post provides instructions and syntax examples if you do want to get rid of the warning.

Ok. I had the same issue with a light and I used this REGEX:(.White.)∩JSONPATH:$.White

Also I have this in one of my colured bulbs which will more than likely be what you want. REGEX:(.HSBColor.)∩JSONPATH:$.HSBColor

Thanks for your support, @ubeaut . This is not working for me. I am missing something and will need to dig deeper. The warning only happens with the ZigBee devices with multiple parameters reporting separately. I will need to experiment with Tasmota’s SetOptions commands. I update the thread with w…

I’m also using the SNZB-02. If you set Setoption83 1 Setoption112 1 Setoption100 1 then the tasmota output looks like this 18:33:58.773 MQT: tele/Zigbee/Gefrierschrank3/SENSOR = {"Gefrierschrank3":{"Device":"0x05DC","Name":"Gefrierschrank3","Humidity":67.31,"Endpoint":1,"LinkQuality":39}} and T…

ZigBee Tasmota JSONPATH issues

Setup, Configuration and Use Beginners

hafniumzinc (T) March 13, 2023, 10:59pm 2