Platform information: Hardware:x86_64/4Gb/128Gb OS: Ubuntu 20.04 Java Runtime Environment: OpenJDK 11 openHAB version: 3.2 Snapshot Issue of the topic: I have setup 2 Yale Assue SL locks with the Zigbee module Adding them to OH was straightforward [image] [image] The lock responds very slow…

[image] smitopher: It can vary from right away to 3 seconds It’s a battery device, so it will take time as battery devices are only polled typically every second in Zigbee (or more specifically 802.15.4). Anyway, I’m pleased this is fixed :slight_smile:

Could you please post the full Java version. From your given information, it looks like an unrecommended version, which could lead to your bad performance… Zulu 11 would be the right choice.

:~$ java -version openjdk version “11.0.11” 2021-04-20 OpenJDK Runtime Environment (build 11.0.11+9-Ubuntu-0ubuntu2.20.04) OpenJDK 64-Bit Server VM (build 11.0.11+9-Ubuntu-0ubuntu2.20.04, mixed mode, sharing) I’m pretty sure that OpenJDK is just as supported and preformat as Zulu. My issue is…

No, we do not recommend using OpenJDK, as there are known issues. Pleas try with Zulu 11.

[image] smitopher: Any suggestion on how to filter just for the Locks? Yes, use the log file viewer -: [image] ZigBee Log Viewer View and filter Z-Smart Systems ZigBee framework logs. As used by the openHAB Zigbee binding. Looking at this I can see so…

Thank you I’m going to try to move the dongle closer to see if that makes any difference. There a a great number of routers (Leviton dimmers) between the current dongle position and the door. I wonder why there is a comm problem?

@chris I want to validate what I see in the event.log and the openhab.log before I go running off to Yale to complain about their terrible Zigbee implementation. I started OH and waited until all zigbee things were online From OH, I locked and unlocked the door lock I then manually locked and un…

@chris I’m following up I have a much smaller OH log Same test Set Zigbee looging to DEBUG Lock and unlock Zigbee Yale Assure SL from OH Lock and unlock manually Lock and unlock using Yale Assure SL Keypad Lock and unlock Zigbee Yale Assure SL from OH Set Zigbee logging to INFO openhab.log …

[image] smitopher: All I see in the events and OH logs are the actions I took using OH, no status changes or events for actions I took directly on the lock and it’s keypad This sounds an awful lot like the same behaviour as Yale/Schlage Z-Wave locks. In those cases, you have to use the alarm_…

[image] smitopher: Definitely no state updates for operations performed on the lock itself. You can try to reinitialise the device. Possibly the device did not get initialised fully and is not sending reports back to the binding when the device state is updated.

Zigbee/Yale Assure SL poor performance and not updating

Setup, Configuration and Use Installation

rpwong (Russ) December 8, 2021, 8:45pm 10

This sounds an awful lot like the same behaviour as Yale/Schlage Z-Wave locks. In those cases, you have to use the alarm_raw channel to get updates from the lock. But I don’t know if the same thing exists with Zigbee.