You are now looking at a whole new level and you have several levels of communication going on.
Do you want some links to some docs?
For the ACK you see in openHAB INS12350 serial coms
for those you are seeing in zniffer I think INS13954 is probably the most penetrable. Send Data is a good one to track through and see all of the retries on retries when you turn a node off.
If you want to see the next layer down
T-REC-G.9959-201202-S!!PDF-E.pdf
you may be amused that wireless communication gets a random backoff after collisions of between 10 and 40 but as the clock on the 500 and before is only in 10 increments that only gives a few options. So yes random choice of a very finite set of backoffs after a collision.
So even at that level you get a couple of retries on failure. So lots of retries and lots of layers of ACKs
"You do not have the level of access necessary to perform the operation you requested. Please contact the owner of the record or your administrator if access is necessary. For more information, see [Insufficient Privileges Errors] " - looks as if it back ending into a salesforce.com site.
As I said, the links are broken on the Silabs site and I will post a tutorial when they are back up. Until then, you could try opening a case with Silabs support. If you’re logged in, you might be able to see mine, which has Zniffer and PC Programmer attached to it.
Almost forgot… if you download Simplicity Studio (that link works), you can install Zniffer and PC Controller through it, but it does not include the zniffer firmware or PC Programmer to flash it with. But if you have the firmware flashed already, then you can at least get Zniffer installed.
Thank youm but I tried that 17 days ago, but it didn’t help. Still doesn’t work for me… multiple browsers and no blocking. Silabs support confirmed the issue.
There are all z-wave tools included.
Once you’ve installed it, go to tools --> z-wave --> “PC Controller” and “Zniffer”
I don’t remember the exact steps. But I was able to install them both.
I’d love to but I’ve not the slightest idea how. I thought there would be an option in the admin settings but there is nothing relevant there. @mstormi, I think you did this on the “What I made with pictures” thread. What am I not seeing?