did an upgrade from Openhab2.1 using the “sudo apt-get upgrade” command today…
Openhab is running on:
Release = Raspbian GNU/Linux 8 (jessie)
Kernel = Linux 4.9.35-v7+
Platform = Raspberry Pi 3 Model B Rev 1.2
After the upgrade I realized that the ZWAVE Module ( Z-Wave.Me RaZberry) running on dev/ttyAMA0
and the assigned Fibaro devices are switching the status:
from OFFLINE (BRIDGE_OFFLINE)–> UNINITIALIZED–>Online (PING)–>HANDLER_MISSING_ERROR etc.
Run basic functions (roller shutter) which worked fine the time the devices were online
After looking for a solution tried to reinstall the Zwave binding…
Steps I did (paperUI):
–>removed all ZWave devices except the controller
–>did a hardware reset of the controller
–>uninstalled ZWave binding
–>rebooted the Raspi
–>installed Zwave binding again
Didn’ add the additional devices just to check the controller behaviour.
The Zwave controller doesn’t go online anymore…
Entries from Log:
2019-12-16 14:45:00.408 [INFO ] [zwave.handler.ZWaveControllerHandler] - Attempting to add listener when controller is null
2019-12-16 14:45:00.760 [INFO ] [ing.zwave.handler.ZWaveSerialHandler] - Connecting to serial port ‘/dev/ttyAMA0’
2019-12-16 14:45:00.793 [INFO ] [ing.zwave.handler.ZWaveSerialHandler] - Serial port is initialized
2019-12-16 14:45:00.841 [INFO ] [ve.internal.protocol.ZWaveController] - Starting ZWave controller
2019-12-16 14:45:00.844 [INFO ] [ve.internal.protocol.ZWaveController] - ZWave timeout is set to 5000ms. Soft reset is false.
2019-12-16 14:45:54.877 [INFO ] [ing.zwave.handler.ZWaveSerialHandler] - Stopped ZWave serial handler
Current status: OFFLINE - BRIDGE_OFFLINE
Could someone give me a hint what is going wrong and where to look for more details related to that issue?