Hello all,
I have now OH4 running up again.
What was the problem:
I have installed the new image directly to the external drive connected to the raspi. Basically it worked since I have moved the system to the external drive with the last installation.
But it somehow did not wok.
So I installed the system again on a SD-Card and made the setup here.
Then moved the system again back to the external USB drive.
Now everything is working again also with the Z-Wave configuration.
No idea why only the Z-Wave had an issue. Maybe in this procedure the disable of the serial line did not work correctly so the Z-Wave controller was not recognized.
1 Like