Hi all,
I have a “ZWave Aeotec Gen5 Door/Window Sensor” which works ok [*] with openHAB 2.5.0.1, just the temper alarm (switch checking if device is (un)mounted) seems not to work.
I thought that would be the alarm_general channel, but in the UI a respective item
Switch HaustuerSensor_Alarm "HaustuerSensor_Alarm [%s]" <siren> { channel="zwave:device:af5df4d6:node5:alarm_general" }
is not updated.
Is alarm_general the right channel? Is it configured correctly? Any hints are welcome.
Here’s the log when pressing the switch (i.e. changing from “unmounted” to “mounted”):
2020-01-04 09:58:06.809 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 10 00 04 00 05 0A 71 05 00 00 00 FF 07 00 00 00 68
2020-01-04 09:58:06.816 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=ApplicationCommandHandler[4], type=Request[0], dest=5, callback=0, payload=00 05 0A 71 05 00 00 00 FF 07 00 00 00
2020-01-04 09:58:06.820 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=ApplicationCommandHandler[4], type=Request[0], dest=5, callback=0, payload=00 05 0A 71 05 00 00 00 FF 07 00 00 00
2020-01-04 09:58:06.822 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction null
2020-01-04 09:58:06.824 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 5: Application Command Request (ALIVE:REQUEST_NIF)
2020-01-04 09:58:06.827 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 5: Incoming command class COMMAND_CLASS_ALARM, endpoint 0
2020-01-04 09:58:06.829 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 5: SECURITY not supported
2020-01-04 09:58:06.831 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 5: Received COMMAND_CLASS_ALARM V4 NOTIFICATION_REPORT
2020-01-04 09:58:06.833 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 5: NOTIFICATION report - 0 = 0, event=0, status=255, plen=0
2020-01-04 09:58:06.835 [DEBUG] [.commandclass.ZWaveAlarmCommandClass] - NODE 5: Alarm Type = BURGLAR (0)
2020-01-04 09:58:06.837 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Got an event from Z-Wave network: ZWaveAlarmValueEvent
2020-01-04 09:58:06.839 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 5: Got a value event from Z-Wave network, endpoint=0, command class=COMMAND_CLASS_ALARM, value=255
2020-01-04 09:58:06.842 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 5: Alarm converter processing NOTIFICATION
2020-01-04 09:58:06.845 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 5: Alarm converter NOTIFICATION event is 0, type OnOffType
2020-01-04 09:58:06.847 [DEBUG] [ternal.converter.ZWaveAlarmConverter] - NODE 5: Alarm converter NOTIFICATION event is 0, channel alarm_general is not implemented.
2020-01-04 09:58:06.850 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 5: Commands processed 1.
2020-01-04 09:58:06.852 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 5: Checking command org.openhab.binding.zwave.internal.protocol.ZWaveCommandClassPayload@b4e21b.
2020-01-04 09:58:06.854 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2020-01-04 09:58:06.856 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2020-01-04 09:58:06.859 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2020-01-04 09:58:06.861 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
[*] I really had a hard time making it work - the binary channel simply stayed silent, battery always at NaN. Just all of a sudden it started working. Not sure what went wrong before, so I don’t have full trust yet…