The channel probably should not be switch_dimmer, but blinds_control instead.
@sihui - feel free to update. Since I don’t have any blinds, I’m a bit hesitant to change as I’m not completely sure of the impact in the UI etc, but you probably know? Changing it to the blinds channel will give you the up/down controls though.
The switch_dimmer channel on a rollershutter device always causes trouble in the UI because there is no chance to get a STOP command and no UP/DOWN either.
Wouldn’t this be a usecase for the “deprecated” flag on the switch_dimmer channel, @chris ? This way users using the old channel have a chance to switch to the new channel without needing to ask in the forum why their device is not working anymore 
Good question… I’m not sure if it will cause problems with the exporter with channel naming - possibly it’s ok I think, but if you want to add the new channel, and mark the old one as deprecated, then I’ll have a quick look at the XML before we export it.
I agree though - if it works without too much trouble, then yes, it’s exactly the use case 
Done
Thanks - it looks ok and I don’t think will cause any problems.
I’m planning on purchasing the Aeotec nano shutter.
If I understand correctly, the Z-wave binding changed the switch_dimmer to blinds_control channel. Is this available in 2.4 or should I update to 2.5 snapshot?
And with the blinds_control it is now possible to open/close the shutters at a specified percentage?
I have a number of Aeotec Nano Shutters implemented (got rid of the Fibaro FGR-223)
I am using the 2.5 snapshot zwave binding (version from april 26). It uses the blinds_control channel and works fine … with one exception:
moving it to specific percentages via a mapping in the sitemap does not work.
i.e.
mappings=[25="25", 50="50" , 75="75"]
… does not work.
I really do not have a use-case for this at this point in time, so no big deal for me.
Strange enough though … this mapping
mappings=[0="AUF", 100="ZU"]
does work.
To me, it looks like every percentage value greater than 0 is interpreted as 100 by the Nano Shutter.
That’s the same problem as OP had with the switch_dimmer.
Use case for me would be to close the blinds partially to block the heat but still let some light in. Summer is coming!
What happens if you do send a command in a rule?
YourRollershutterItem.sendCommand(50)
2.5 snapshot
Has it been calibrated, or does it require calibration?
I don’t have them yet, just collection some information to see if I want this switch or another brand.
Do you know this @ffr?
It does not require calibration. there is a parameter 35 (Time for left to right, or up to down) that you need to set.
I just tested the rule-case:
rule "test 2"
when
Item Test changed to ON
then
BS_Fitness_Room_Shutter.sendCommand(5)
end
Executing this rule with the blinds completely open closes them to 100%.
Executing this rule with the blinds completely closed does nothing.
Then it is time for debug logs.
@sihui
I am not a fan of posting logs with secure devices in the public forum. You will get a message.
From my limited knowledge I guess the switch_dimmer needs to be removed completely from the database:
It looks like the Switch_Multilevel command class is updated through both channels. switch_dimmer and blinds_control.
But I’m not sure …
Hi folks,
What’s the status regarding this issue?
I just bought an Aeotec Nano Shutter and cannot set any position value between 0 and 100.
Here’s my actual config:
• Aeotec Nano Shutter
• OpenHAB 2.5.0.M2 (edit: same with today’s Snapshot)
• Paper UI with Thing channel: “Blinds Control” linked to my item.
• I clocked my roller shutter and set the “35: Moving time left to right” value to 15.
Any value (ie. 67) that I input in the Blinds Control field get reverted to 100.
I recently upgraded from 2.4.0 to 2.5.0M4. I deleted my zwave things and readded them after the upgrade.
This was in my backlog, and I looked at it today. I have the same problem as you @Tazintosh:
2019-11-03 12:39:12.910 [ome.event.ItemCommandEvent] - Item 'Rolluiken_Shutter' received command 78
2019-11-03 12:39:12.950 [nt.ItemStatePredictedEvent] - Rolluiken_Shutter predicted to become 78
2019-11-03 12:39:12.977 [vent.ItemStateChangedEvent] - Rolluiken_Shutter changed from 100 to 78
2019-11-03 12:39:14.650 [vent.ItemStateChangedEvent] - Rolluiken_Shutter changed from 78 to 100
It doesn’t matter if I do this with a rule or through the sitemap. I did also try with different values for parameter 35, nothing changes.
I have a debug log @sihui @chris (This is with parameter 35 at 1:
2019-11-03 12:45:23.124 [ome.event.ItemCommandEvent] - Item 'Rolluiken_Shutter' received command 50
==> /var/log/openhab2/openhab.log <==
2019-11-03 12:45:23.130 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Command received zwave:device:144cd173:node6:switch_dimmer --> 50 [PercentType]
2019-11-03 12:45:23.135 [DEBUG] [ss.ZWaveMultiLevelSwitchCommandClass] - NODE 6: Creating new message for command SWITCH_MULTILEVEL_SET
==> /var/log/openhab2/events.log <==
2019-11-03 12:45:23.135 [nt.ItemStatePredictedEvent] - Rolluiken_Shutter predicted to become 50
==> /var/log/openhab2/openhab.log <==
2019-11-03 12:45:23.137 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: SECURITY NOT required on COMMAND_CLASS_SWITCH_MULTILEVEL
2019-11-03 12:45:23.141 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: Command Class COMMAND_CLASS_SWITCH_MULTILEVEL is NOT required to be secured
2019-11-03 12:45:23.145 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Adding to device queue
2019-11-03 12:45:23.148 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Added 6744 to queue - size 1
2019-11-03 12:45:23.153 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2019-11-03 12:45:23.157 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 0A 00 13 06 03 26 01 32 25 69 BA
2019-11-03 12:45:23.164 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 6: Sending REQUEST Message = 01 0A 00 13 06 03 26 01 32 25 69 BA
2019-11-03 12:45:23.171 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2019-11-03 12:45:23.168 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2019-11-03 12:45:23.177 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2019-11-03 12:45:23.177 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 6744: [WAIT_RESPONSE] priority=Set, requiresResponse=true, callback: 105
2019-11-03 12:45:23.186 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2019-11-03 12:45:23.187 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 04 01 13 01 E8
2019-11-03 12:45:23.189 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 6744: [WAIT_RESPONSE] priority=Set, requiresResponse=true, callback: 105
2019-11-03 12:45:23.193 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=SendData[19], type=Response[1], dest=255, callback=0, payload=01
2019-11-03 12:45:23.196 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2019-11-03 12:45:23.184 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Polling initialised at 1800 seconds - start in 1500 milliseconds.
==> /var/log/openhab2/events.log <==
2019-11-03 12:45:23.192 [vent.ItemStateChangedEvent] - Rolluiken_Shutter changed from 100 to 50
==> /var/log/openhab2/openhab.log <==
2019-11-03 12:45:23.204 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=SendData[19], type=Response[1], dest=255, callback=0, payload=01
2019-11-03 12:45:23.210 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 6744: [WAIT_RESPONSE] priority=Set, requiresResponse=true, callback: 105
2019-11-03 12:45:23.213 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2019-11-03 12:45:23.222 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 6744: [WAIT_RESPONSE] priority=Set, requiresResponse=true, callback: 105
2019-11-03 12:45:23.226 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=SendData[19], type=Response[1], dest=255, callback=0, payload=01
2019-11-03 12:45:23.228 [DEBUG] [l.serialmessage.SendDataMessageClass] - NODE 6: sentData successfully placed on stack.
2019-11-03 12:45:23.231 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 6744: Advanced to WAIT_REQUEST
2019-11-03 12:45:23.231 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 07 00 13 69 00 00 06 84
2019-11-03 12:45:23.228 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Command received zwave:device:144cd173:node6:blinds_control --> 50 [PercentType]
2019-11-03 12:45:23.234 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: TID 6744: Transaction not completed
2019-11-03 12:45:23.234 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=SendData[19], type=Request[0], dest=0, callback=105, payload=69 00 00 06
2019-11-03 12:45:23.234 [DEBUG] [ss.ZWaveMultiLevelSwitchCommandClass] - NODE 6: Creating new message for command SWITCH_MULTILEVEL_SET
2019-11-03 12:45:23.238 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2019-11-03 12:45:23.237 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: SECURITY NOT required on COMMAND_CLASS_SWITCH_MULTILEVEL
2019-11-03 12:45:23.240 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2019-11-03 12:45:23.240 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: Command Class COMMAND_CLASS_SWITCH_MULTILEVEL is NOT required to be secured
2019-11-03 12:45:23.243 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Adding to device queue
2019-11-03 12:45:23.245 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Added 6745 to queue - size 1
2019-11-03 12:45:23.246 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2019-11-03 12:45:23.249 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=SendData[19], type=Request[0], dest=0, callback=105, payload=69 00 00 06
2019-11-03 12:45:23.249 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Polling initialised at 1800 seconds - start in 1500 milliseconds.
2019-11-03 12:45:23.251 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 6744: [WAIT_REQUEST] priority=Set, requiresResponse=true, callback: 105
2019-11-03 12:45:23.254 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2019-11-03 12:45:23.256 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 6744: [WAIT_REQUEST] priority=Set, requiresResponse=true, callback: 105
2019-11-03 12:45:23.258 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking TID 6744: (Callback 105)
2019-11-03 12:45:23.261 [DEBUG] [.serialmessage.ZWaveCommandProcessor] - Callback match!
2019-11-03 12:45:23.262 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Correlated to TID 6744: callback 105
2019-11-03 12:45:23.265 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=SendData[19], type=Request[0], dest=0, callback=105, payload=69 00 00 06
2019-11-03 12:45:23.267 [DEBUG] [l.serialmessage.SendDataMessageClass] - NODE 6: SendData Request. CallBack ID = 105, Status = Transmission complete and ACK received(0)
2019-11-03 12:45:23.270 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: resetResendCount initComplete=true isDead=false
2019-11-03 12:45:23.272 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 6744: Transaction COMPLETED
2019-11-03 12:45:23.274 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Response processed after 97ms
2019-11-03 12:45:23.276 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: TID 6744: Transaction completed
2019-11-03 12:45:23.279 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: notifyTransactionResponse TID:6744 DONE
2019-11-03 12:45:23.281 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Got an event from Z-Wave network: ZWaveTransactionCompletedEvent
2019-11-03 12:45:23.283 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2019-11-03 12:45:23.285 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2019-11-03 12:45:23.288 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 0A 00 13 06 03 26 01 32 25 6A B9
2019-11-03 12:45:23.291 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 6: Sending REQUEST Message = 01 0A 00 13 06 03 26 01 32 25 6A B9
2019-11-03 12:45:23.293 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2019-11-03 12:45:23.295 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 6745: [WAIT_RESPONSE] priority=Set, requiresResponse=true, callback: 106
2019-11-03 12:45:23.297 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2019-11-03 12:45:23.299 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2019-11-03 12:45:23.302 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2019-11-03 12:45:23.303 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 04 01 13 01 E8
2019-11-03 12:45:23.306 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 6745: [WAIT_RESPONSE] priority=Set, requiresResponse=true, callback: 106
2019-11-03 12:45:23.308 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=SendData[19], type=Response[1], dest=255, callback=0, payload=01
2019-11-03 12:45:23.309 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2019-11-03 12:45:23.311 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2019-11-03 12:45:23.313 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2019-11-03 12:45:23.315 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=SendData[19], type=Response[1], dest=255, callback=0, payload=01
2019-11-03 12:45:23.317 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 6745: [WAIT_RESPONSE] priority=Set, requiresResponse=true, callback: 106
2019-11-03 12:45:23.319 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2019-11-03 12:45:23.321 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 6745: [WAIT_RESPONSE] priority=Set, requiresResponse=true, callback: 106
2019-11-03 12:45:23.323 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=SendData[19], type=Response[1], dest=255, callback=0, payload=01
2019-11-03 12:45:23.326 [DEBUG] [l.serialmessage.SendDataMessageClass] - NODE 6: sentData successfully placed on stack.
2019-11-03 12:45:23.328 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 6745: Advanced to WAIT_REQUEST
2019-11-03 12:45:23.330 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: TID 6745: Transaction not completed
2019-11-03 12:45:23.332 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2019-11-03 12:45:23.334 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2019-11-03 12:45:23.356 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 07 00 13 6A 00 00 06 87
2019-11-03 12:45:23.359 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=SendData[19], type=Request[0], dest=0, callback=106, payload=6A 00 00 06
2019-11-03 12:45:23.362 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=SendData[19], type=Request[0], dest=0, callback=106, payload=6A 00 00 06
2019-11-03 12:45:23.365 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 6745: [WAIT_REQUEST] priority=Set, requiresResponse=true, callback: 106
2019-11-03 12:45:23.367 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2019-11-03 12:45:23.369 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 6745: [WAIT_REQUEST] priority=Set, requiresResponse=true, callback: 106
2019-11-03 12:45:23.370 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking TID 6745: (Callback 106)
2019-11-03 12:45:23.373 [DEBUG] [.serialmessage.ZWaveCommandProcessor] - Callback match!
2019-11-03 12:45:23.374 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Correlated to TID 6745: callback 106
2019-11-03 12:45:23.377 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=SendData[19], type=Request[0], dest=0, callback=106, payload=6A 00 00 06
2019-11-03 12:45:23.378 [DEBUG] [l.serialmessage.SendDataMessageClass] - NODE 6: SendData Request. CallBack ID = 106, Status = Transmission complete and ACK received(0)
2019-11-03 12:45:23.380 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: resetResendCount initComplete=true isDead=false
2019-11-03 12:45:23.382 [DEBUG] [e.internal.protocol.ZWaveTransaction] - TID 6745: Transaction COMPLETED
2019-11-03 12:45:23.384 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Response processed after 89ms
2019-11-03 12:45:23.386 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: TID 6745: Transaction completed
2019-11-03 12:45:23.388 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: notifyTransactionResponse TID:6745 DONE
2019-11-03 12:45:23.390 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Got an event from Z-Wave network: ZWaveTransactionCompletedEvent
2019-11-03 12:45:23.392 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2019-11-03 12:45:23.394 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2019-11-03 12:45:24.749 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Polling...
2019-11-03 12:45:24.752 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Polling zwave:device:144cd173:node6:switch_dimmer
2019-11-03 12:45:24.754 [DEBUG] [erter.ZWaveMultiLevelSwitchConverter] - NODE 6: Generating poll message for COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0
2019-11-03 12:45:24.757 [DEBUG] [ss.ZWaveMultiLevelSwitchCommandClass] - NODE 6: Creating new message for command SWITCH_MULTILEVEL_GET
2019-11-03 12:45:24.759 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: SECURITY NOT required on COMMAND_CLASS_SWITCH_MULTILEVEL
2019-11-03 12:45:24.761 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: Command Class COMMAND_CLASS_SWITCH_MULTILEVEL is NOT required to be secured
2019-11-03 12:45:24.764 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Polling skipped for zwave:device:144cd173:node6:switch_dimmer on COMMAND_CLASS_BASIC
2019-11-03 12:45:24.766 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Polling zwave:device:144cd173:node6:blinds_control
2019-11-03 12:45:24.768 [DEBUG] [erter.ZWaveMultiLevelSwitchConverter] - NODE 6: Generating poll message for COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0
2019-11-03 12:45:24.771 [DEBUG] [ss.ZWaveMultiLevelSwitchCommandClass] - NODE 6: Creating new message for command SWITCH_MULTILEVEL_GET
2019-11-03 12:45:24.773 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: SECURITY NOT required on COMMAND_CLASS_SWITCH_MULTILEVEL
2019-11-03 12:45:24.776 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: Command Class COMMAND_CLASS_SWITCH_MULTILEVEL is NOT required to be secured
2019-11-03 12:45:24.780 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Polling skipped for zwave:device:144cd173:node6:blinds_control on COMMAND_CLASS_BASIC
2019-11-03 12:45:24.783 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Polling zwave:device:144cd173:node6:scene_number
2019-11-03 12:45:24.791 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Adding to device queue
2019-11-03 12:45:24.799 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Added 6746 to queue - size 1
2019-11-03 12:45:24.803 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2019-11-03 12:45:24.809 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 09 00 13 06 02 26 02 25 6B 8B
2019-11-03 12:45:24.815 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 6: Sending REQUEST Message = 01 09 00 13 06 02 26 02 25 6B 8B
2019-11-03 12:45:24.818 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2019-11-03 12:45:24.821 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 6746: [WAIT_RESPONSE] priority=Get, requiresResponse=true, callback: 107
2019-11-03 12:45:24.822 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2019-11-03 12:45:24.824 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Adding to device queue
2019-11-03 12:45:24.828 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Added 6747 to queue - size 1
2019-11-03 12:45:24.828 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2019-11-03 12:45:24.831 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2019-11-03 12:45:24.833 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2019-11-03 12:45:24.836 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 6746: [WAIT_RESPONSE] priority=Get, requiresResponse=true, callback: 107
2019-11-03 12:45:24.838 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 04 01 13 01 E8
2019-11-03 12:45:24.838 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2019-11-03 12:45:24.840 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2019-11-03 12:45:24.843 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2019-11-03 12:45:24.846 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=SendData[19], type=Response[1], dest=255, callback=0, payload=01
2019-11-03 12:45:24.850 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=SendData[19], type=Response[1], dest=255, callback=0, payload=01
2019-11-03 12:45:24.852 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 6746: [WAIT_RESPONSE] priority=Get, requiresResponse=true, callback: 107
2019-11-03 12:45:24.855 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2019-11-03 12:45:24.857 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 6746: [WAIT_RESPONSE] priority=Get, requiresResponse=true, callback: 107
2019-11-03 12:45:24.860 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=SendData[19], type=Response[1], dest=255, callback=0, payload=01
2019-11-03 12:45:24.862 [DEBUG] [l.serialmessage.SendDataMessageClass] - NODE 6: sentData successfully placed on stack.
2019-11-03 12:45:24.865 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 6746: Advanced to WAIT_REQUEST
2019-11-03 12:45:24.867 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: TID 6746: Transaction not completed
2019-11-03 12:45:24.869 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2019-11-03 12:45:24.872 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2019-11-03 12:45:24.890 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 07 00 13 6B 00 00 06 86
2019-11-03 12:45:24.896 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=SendData[19], type=Request[0], dest=0, callback=107, payload=6B 00 00 06
2019-11-03 12:45:24.900 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=SendData[19], type=Request[0], dest=0, callback=107, payload=6B 00 00 06
2019-11-03 12:45:24.902 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 6746: [WAIT_REQUEST] priority=Get, requiresResponse=true, callback: 107
2019-11-03 12:45:24.904 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2019-11-03 12:45:24.906 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 6746: [WAIT_REQUEST] priority=Get, requiresResponse=true, callback: 107
2019-11-03 12:45:24.907 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking TID 6746: (Callback 107)
2019-11-03 12:45:24.909 [DEBUG] [.serialmessage.ZWaveCommandProcessor] - Callback match!
2019-11-03 12:45:24.911 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Correlated to TID 6746: callback 107
2019-11-03 12:45:24.913 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=SendData[19], type=Request[0], dest=0, callback=107, payload=6B 00 00 06
2019-11-03 12:45:24.915 [DEBUG] [l.serialmessage.SendDataMessageClass] - NODE 6: SendData Request. CallBack ID = 107, Status = Transmission complete and ACK received(0)
2019-11-03 12:45:24.917 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: resetResendCount initComplete=true isDead=false
2019-11-03 12:45:24.919 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 6746: Advanced to WAIT_DATA
2019-11-03 12:45:24.921 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: TID 6746: Transaction not completed
2019-11-03 12:45:24.922 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2019-11-03 12:45:24.924 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2019-11-03 12:45:24.961 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 00 04 00 06 03 26 03 63 B1
2019-11-03 12:45:24.965 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=ApplicationCommandHandler[4], type=Request[0], dest=6, callback=0, payload=00 06 03 26 03 63
2019-11-03 12:45:24.968 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=ApplicationCommandHandler[4], type=Request[0], dest=6, callback=0, payload=00 06 03 26 03 63
2019-11-03 12:45:24.969 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction null
2019-11-03 12:45:24.971 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Application Command Request (ALIVE:DONE)
2019-11-03 12:45:24.972 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: resetResendCount initComplete=true isDead=false
2019-11-03 12:45:24.974 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: Incoming command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0
2019-11-03 12:45:24.976 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: SECURITY NOT required on COMMAND_CLASS_SWITCH_MULTILEVEL
2019-11-03 12:45:24.977 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 6: Received COMMAND_CLASS_SWITCH_MULTILEVEL V3 SWITCH_MULTILEVEL_REPORT
2019-11-03 12:45:24.979 [DEBUG] [ss.ZWaveMultiLevelSwitchCommandClass] - NODE 6: Switch Multi Level report, value = 99
2019-11-03 12:45:24.981 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Got an event from Z-Wave network: ZWaveCommandClassValueEvent
2019-11-03 12:45:24.982 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Got a value event from Z-Wave network, endpoint=0, command class=COMMAND_CLASS_SWITCH_MULTILEVEL, value=99
2019-11-03 12:45:24.984 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Updating channel state zwave:device:144cd173:node6:switch_dimmer to 100 [PercentType]
2019-11-03 12:45:24.987 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Updating channel state zwave:device:144cd173:node6:blinds_control to 100 [PercentType]
2019-11-03 12:45:24.989 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Commands processed 1.
2019-11-03 12:45:24.991 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Checking command org.openhab.binding.zwave.internal.protocol.ZWaveCommandClassPayload@3d33c3.
2019-11-03 12:45:24.993 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Command verified org.openhab.binding.zwave.internal.protocol.ZWaveCommandClassPayload@3d33c3.
2019-11-03 12:45:24.995 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: notifyTransactionResponse TID:6746 DONE
2019-11-03 12:45:24.997 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Got an event from Z-Wave network: ZWaveTransactionCompletedEvent
2019-11-03 12:45:24.998 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 1
2019-11-03 12:45:25.000 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2019-11-03 12:45:25.002 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2019-11-03 12:45:25.003 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2019-11-03 12:45:25.006 [DEBUG] [wave.internal.protocol.SerialMessage] - Assembled message buffer = 01 09 00 13 06 02 26 02 25 6C 8C
2019-11-03 12:45:25.010 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - NODE 6: Sending REQUEST Message = 01 09 00 13 06 02 26 02 25 6C 8C
2019-11-03 12:45:25.015 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 06
2019-11-03 12:45:25.018 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2019-11-03 12:45:25.013 [DEBUG] [ing.zwave.handler.ZWaveSerialHandler] - Message SENT
2019-11-03 12:45:25.021 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage started: TID 6747: [WAIT_RESPONSE] priority=Get, requiresResponse=true, callback: 108
2019-11-03 12:45:25.023 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=null[0], type=ACK[2], dest=255, callback=0, payload=
2019-11-03 12:45:25.024 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 04 01 13 01 E8
2019-11-03 12:45:25.029 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 6747: [WAIT_RESPONSE] priority=Get, requiresResponse=true, callback: 108
2019-11-03 12:45:25.029 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=SendData[19], type=Response[1], dest=255, callback=0, payload=01
2019-11-03 12:45:25.031 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg: ACK
2019-11-03 12:45:25.034 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2019-11-03 12:45:25.037 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2019-11-03 12:45:25.039 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=SendData[19], type=Response[1], dest=255, callback=0, payload=01
==> /var/log/openhab2/events.log <==
2019-11-03 12:45:25.043 [vent.ItemStateChangedEvent] - Rolluiken_Shutter changed from 50 to 100
==> /var/log/openhab2/openhab.log <==
2019-11-03 12:45:25.041 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 6747: [WAIT_RESPONSE] priority=Get, requiresResponse=true, callback: 108
2019-11-03 12:45:25.045 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2019-11-03 12:45:25.048 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 6747: [WAIT_RESPONSE] priority=Get, requiresResponse=true, callback: 108
2019-11-03 12:45:25.050 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=SendData[19], type=Response[1], dest=255, callback=0, payload=01
2019-11-03 12:45:25.053 [DEBUG] [l.serialmessage.SendDataMessageClass] - NODE 6: sentData successfully placed on stack.
2019-11-03 12:45:25.056 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 6747: Advanced to WAIT_REQUEST
2019-11-03 12:45:25.058 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: TID 6747: Transaction not completed
2019-11-03 12:45:25.060 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2019-11-03 12:45:25.062 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2019-11-03 12:45:25.098 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 07 00 13 6C 00 00 08 8F
2019-11-03 12:45:25.101 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=SendData[19], type=Request[0], dest=0, callback=108, payload=6C 00 00 08
2019-11-03 12:45:25.104 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=SendData[19], type=Request[0], dest=0, callback=108, payload=6C 00 00 08
2019-11-03 12:45:25.107 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction TID 6747: [WAIT_REQUEST] priority=Get, requiresResponse=true, callback: 108
2019-11-03 12:45:25.109 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking outstanding transactions: 1
2019-11-03 12:45:25.111 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Last transaction: TID 6747: [WAIT_REQUEST] priority=Get, requiresResponse=true, callback: 108
2019-11-03 12:45:25.114 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Checking TID 6747: (Callback 108)
2019-11-03 12:45:25.116 [DEBUG] [.serialmessage.ZWaveCommandProcessor] - Callback match!
2019-11-03 12:45:25.118 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Correlated to TID 6747: callback 108
2019-11-03 12:45:25.120 [DEBUG] [ve.internal.protocol.ZWaveController] - Incoming Message: Message: class=SendData[19], type=Request[0], dest=0, callback=108, payload=6C 00 00 08
2019-11-03 12:45:25.122 [DEBUG] [l.serialmessage.SendDataMessageClass] - NODE 6: SendData Request. CallBack ID = 108, Status = Transmission complete and ACK received(0)
2019-11-03 12:45:25.124 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: resetResendCount initComplete=true isDead=false
2019-11-03 12:45:25.126 [DEBUG] [nal.protocol.ZWaveTransactionManager] - TID 6747: Advanced to WAIT_DATA
2019-11-03 12:45:25.127 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: TID 6747: Transaction not completed
2019-11-03 12:45:25.129 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2019-11-03 12:45:25.130 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 1 out at start. Holdoff false.
2019-11-03 12:45:25.182 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 00 04 00 06 03 26 03 63 B1
2019-11-03 12:45:25.184 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=ApplicationCommandHandler[4], type=Request[0], dest=6, callback=0, payload=00 06 03 26 03 63
2019-11-03 12:45:25.186 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=ApplicationCommandHandler[4], type=Request[0], dest=6, callback=0, payload=00 06 03 26 03 63
2019-11-03 12:45:25.188 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction null
2019-11-03 12:45:25.192 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Application Command Request (ALIVE:DONE)
2019-11-03 12:45:25.193 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: resetResendCount initComplete=true isDead=false
2019-11-03 12:45:25.196 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: Incoming command class COMMAND_CLASS_SWITCH_MULTILEVEL, endpoint 0
2019-11-03 12:45:25.200 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: SECURITY NOT required on COMMAND_CLASS_SWITCH_MULTILEVEL
2019-11-03 12:45:25.202 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 6: Received COMMAND_CLASS_SWITCH_MULTILEVEL V3 SWITCH_MULTILEVEL_REPORT
2019-11-03 12:45:25.203 [DEBUG] [ss.ZWaveMultiLevelSwitchCommandClass] - NODE 6: Switch Multi Level report, value = 99
2019-11-03 12:45:25.205 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Got an event from Z-Wave network: ZWaveCommandClassValueEvent
2019-11-03 12:45:25.207 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Got a value event from Z-Wave network, endpoint=0, command class=COMMAND_CLASS_SWITCH_MULTILEVEL, value=99
2019-11-03 12:45:25.209 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Updating channel state zwave:device:144cd173:node6:switch_dimmer to 100 [PercentType]
2019-11-03 12:45:25.212 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Updating channel state zwave:device:144cd173:node6:blinds_control to 100 [PercentType]
2019-11-03 12:45:25.215 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Commands processed 1.
2019-11-03 12:45:25.216 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Checking command org.openhab.binding.zwave.internal.protocol.ZWaveCommandClassPayload@1931332.
2019-11-03 12:45:25.219 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Command verified org.openhab.binding.zwave.internal.protocol.ZWaveCommandClassPayload@1931332.
2019-11-03 12:45:25.221 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: notifyTransactionResponse TID:6747 DONE
2019-11-03 12:45:25.223 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Got an event from Z-Wave network: ZWaveTransactionCompletedEvent
2019-11-03 12:45:25.226 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 1
2019-11-03 12:45:25.228 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2019-11-03 12:45:25.230 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2019-11-03 12:45:25.232 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.
2019-11-03 12:45:25.256 [DEBUG] [WaveSerialHandler$ZWaveReceiveThread] - Receive Message = 01 09 00 04 00 06 03 20 03 63 B7
2019-11-03 12:45:25.259 [DEBUG] [nal.protocol.ZWaveTransactionManager] - processReceiveMessage input 0<>128 : Message: class=ApplicationCommandHandler[4], type=Request[0], dest=6, callback=0, payload=00 06 03 20 03 63
2019-11-03 12:45:25.261 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Received msg (0): Message: class=ApplicationCommandHandler[4], type=Request[0], dest=6, callback=0, payload=00 06 03 20 03 63
2019-11-03 12:45:25.263 [DEBUG] [nal.protocol.ZWaveTransactionManager] - lastTransaction null
2019-11-03 12:45:25.265 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Application Command Request (ALIVE:DONE)
2019-11-03 12:45:25.267 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: resetResendCount initComplete=true isDead=false
2019-11-03 12:45:25.269 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: Incoming command class COMMAND_CLASS_BASIC, endpoint 0
2019-11-03 12:45:25.270 [DEBUG] [ng.zwave.internal.protocol.ZWaveNode] - NODE 6: SECURITY NOT required on COMMAND_CLASS_BASIC
2019-11-03 12:45:25.272 [DEBUG] [tocol.commandclass.ZWaveCommandClass] - NODE 6: Received COMMAND_CLASS_BASIC V1 BASIC_REPORT
2019-11-03 12:45:25.274 [DEBUG] [.commandclass.ZWaveBasicCommandClass] - NODE 6: Basic report, value = 99
2019-11-03 12:45:25.276 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Got an event from Z-Wave network: ZWaveCommandClassValueEvent
2019-11-03 12:45:25.278 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Got a value event from Z-Wave network, endpoint=0, command class=COMMAND_CLASS_BASIC, value=99
2019-11-03 12:45:25.280 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Updating channel state zwave:device:144cd173:node6:switch_dimmer to 100 [PercentType]
2019-11-03 12:45:25.285 [DEBUG] [ding.zwave.handler.ZWaveThingHandler] - NODE 6: Updating channel state zwave:device:144cd173:node6:blinds_control to 100 [PercentType]
2019-11-03 12:45:25.288 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Commands processed 1.
2019-11-03 12:45:25.290 [DEBUG] [nal.protocol.ZWaveTransactionManager] - NODE 6: Checking command org.openhab.binding.zwave.internal.protocol.ZWaveCommandClassPayload@f4ddb5.
2019-11-03 12:45:25.292 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2019-11-03 12:45:25.296 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction completed - outstandingTransactions 0
2019-11-03 12:45:25.298 [DEBUG] [nal.protocol.ZWaveTransactionManager] - ZWaveReceiveThread queue empty
2019-11-03 12:45:25.300 [DEBUG] [nal.protocol.ZWaveTransactionManager] - Transaction SendNextMessage 0 out at start. Holdoff false.Yes parameter 80 is at 1.
I noticed this discussion was continued in a new topic.
Long story short, the device needs a firmware update, that you cannot perform by yourself.
