I’m currently using the binding to control BTicino alarm via Aux command and CEN+.
The binding does not support Alarm yet (e.g. Alarm Status).
Alarm feature request on GIT
Marco
Ciao, can you explain me what do you mean exactly? I understand that you use the binding for all and you configured a command for the alarm. So How do I configure the aux command? at the moment in the current solution I have, it’s an aux command as well, but I do not have the knowledge to explain how it works. I suppose it’s just a command send and read by the alarm. In fact I had to “open” these command in the alarm configuration.
I only need these:
“STAY_ARM”: “941##",
“AWAY_ARM”: "919##”,
“NIGHT_ARM”: “943##",
“DISARMED”: "909##”,
and stop.
These ones are read by the alarm and translated into specific commands by the alarm system.
Can anybody explain me how can I do the same?
Regards
Until AUX and/or Alarm will be supported natively by the binding, I’ve configured on the MH200N a scenario triggered by CEN+ that send AUX command on the bus. CEN and CEN+ are already supported.
Marco
Ciao Marco, I do not have a mh200n. I own a MHS1 and the 10inc screen. The screen is able to manage the alarm 3486. CEN scenario can be defined also via the screen or a mh200 is necessary?
Hello,
I can’t get the blids to work with alexa, it works in paper UI si the config is fine.
No idea where i’m wrong:
Thing
Thing bus_automation kitchen_front_shade “Kitchen” @ “Kitchen” [where=“75”, shutterRun=“12000”]
Item:
Rollershutter kitchen_front_shade “Kitchen [%d 0f %%]” (Kitchen) [ “Switchable” ] {alexa=“RangeController.rangeValue” [supportedRange=“0:100:1”,presets=“0=@Value.Open,100=@Value.Close”], channel=“openwebnet:bus_automation:MH200N:kitchen_front_shade:shutter” }
Any idea?
It seems the use of Semantics for the rangeController V3 tag is still work in progress for the openHAB Alexa skill… but when it does arrive it will open up lots of possibilities and the Routine work around will not be needed.
Looks like you have both v2 and v3 style Alexa tags. Try it with just switchable [ “Switchable” ] and not the Alexa= etc… Thats quite new
Interestingly using supportedRange=“0:100:10" means raising or lowing the blinds can be done in useful amounts without stating how much in the voice command. eg ‘Alexa, raise the the blinds’ and they move 10 points. I found that ‘raise’ the blinds command actually lowers them. I assume its because it raises the number towards 100 ie towards fully closed
Ok so i have to wait a little bit more.
There is no point for me to control the blinds if open command closes them and vice versa…
You may not have to wait for long. Its quite an exciting improvement for openwebnet BUS item integration with Alexa.
I suggest you and anyone else interested in this development also ‘like’ his post 
While we wait for the Alexa skill developement here are some more details and examples that will give you an idea of upcoming possibilities for openwebnet items:
The first semantic extensions (coming soon) enable you to support utterances that use “open”, “close,” “raise,” and “lower” commands such as “Alexa, open the window” and “Alexa, lower the movie screen”. These new semantic extensions (coming soon) can be used to deliver natural control of devices such as projector screens, windows, water valves, closets, drawers, garage doors, gates, curtains, shades, blinds, awnings, and more.
There are experiences of compatibility with the bticino HC4451 thermostat.
I am developing a way to integrate this device through custom rules.
it’s an “advanced” parameter, did you read this from the README ?
[*] = advanced channel: in PaperUI can be shown from Thing config > Channel list > Show More button. Link to an item by clicking on the channel blue button
Is this a question? Difficult to help if it’s not clear it’s a question or what.
HC4451 seems a basic chronothermostat not attached to the BUS system. Probably it’s not connected to your BTicino gateway. Did you find the thermostat in the Inbox after discovery?
Can’t wait!
The device is connected to the BUS and also to my gateway. The thermostat is found in the Inbox after searching.
After the indication I have now been able to visualize “heating is”.
Changing the temperature from “Setpoint Temperature” does not change the “Target Temperature”.
It’s possible to change the “Heating is” status manually?
Ciao, the PaperUI configuration is working I would like to provide .items and .things file manually to have full control. I do not understand what I am doing wrong because I created the files, and a dummy sitemap. When I use manaully created items it always says (for every kind of object)
2019-12-05 11:24:32.150 [ome.event.ItemCommandEvent] - Item ‘iCu_Lampadario’ received command ON
2019-12-05 11:24:32.153 [nt.ItemStatePredictedEvent] - iCu_Lampadario predicted to become NULL
and nothing happens.
Can anybody explain me what I am doing wrong?
Thanks!
Forcing the start of the “Heating Is” returns the following message in the log:
- ==OWN:ThermoHandler== Unsupported ChannelUID openwebnet:bus_thermostat:F454_000350860367:1:heating
You do not provide enough information for us to be able to help.
Post here the relevant lines of both .things and .items files.
AND always use “code fences”, otherwise it’s impossibile to look at your configurations.
You continue not to read carefully the README, which is the only thing we are asking you to do.
In the README it’s stated that “Heating is” is of course a read-only parameter (see Read/Write column), and that makes sense because you cannot directly start the heating using the thermostat or the gateway or the binding, you should instead set setpoint temperature to a lower level than current temperature. In your picture above Temp=20°, Target Temp=18° so how would you expect that the heating is started ???
This is wrong behavior: changing Setpoint should also change Target in manual mode.
Try the following:
- set debug level to DEBUG (see README_beta for info)
- set the mode to Auto
- set the mode to Manual
- change the Setpoint Temperature to something higher than current tempo, for example 23°
- if the Target Temperature does not change, copy here the log using code fences.
You should also tell which BTicino opwenebnet Gateway (F454 ? MyHOMEServer1 ?) are you using, and which openHAB version.
12-07 18:21:43.416 [INFO ] [g.openwebnet.bus.MyHomeJavaConnector] - COM SENDING ============>>>>>>>>>>>> *#4*1*#14*0220*3##
2019-12-07 18:21:43.515 [INFO ] [g.openwebnet.bus.MyHomeSocketFactory] - COM RECEIVED <<<<<<<<<<<<============ *#*1##
==> /var/log/openhab2/events.log <==
2019-12-07 18:21:55.391 [ome.event.ItemCommandEvent] - Item 'openwebnet_bus_thermostat_F454_000350860367_1_setMode' received command MANUAL
==> /var/log/openhab2/openhab.log <==
2019-12-07 18:21:55.398 [DEBUG] [ebnet.handler.OpenWebNetThingHandler] - ==OWN:ThingHandler== handleCommand() (command=MANUAL - channel=openwebnet:bus_thermostat:F454_000350860367:1:setMode)
2019-12-07 18:21:55.410 [DEBUG] [er.OpenWebNetThermoregulationHandler] - ==OWN:ThermoHandler== handleModeCommand() (command=MANUAL)
==> /var/log/openhab2/events.log <==
2019-12-07 18:21:55.400 [nt.ItemStatePredictedEvent] - openwebnet_bus_thermostat_F454_000350860367_1_setMode predicted to become MANUAL
==> /var/log/openhab2/openhab.log <==
2019-12-07 18:21:55.414 [DEBUG] [er.OpenWebNetThermoregulationHandler] - ==OWN:ThermoHandler== handleModeCommand() modeWhat=MANUAL_HEATING
==> /var/log/openhab2/events.log <==
2019-12-07 18:21:55.418 [vent.ItemStateChangedEvent] - openwebnet_bus_thermostat_F454_000350860367_1_setMode changed from AUTO to MANUAL
==> /var/log/openhab2/openhab.log <==
2019-12-07 18:21:55.419 [INFO ] [g.openwebnet.bus.MyHomeJavaConnector] - COM SENDING ============>>>>>>>>>>>> *4*110*#1##
2019-12-07 18:21:55.470 [INFO ] [g.openwebnet.bus.MyHomeSocketFactory] - COM RECEIVED <<<<<<<<<<<<============ *#*0##
==> /var/log/openhab2/events.log <==
2019-12-07 18:21:59.779 [ome.event.ItemCommandEvent] - Item 'openwebnet_bus_thermostat_F454_000350860367_1_setpointTemperature' received command 25 °C
2019-12-07 18:21:59.791 [nt.ItemStatePredictedEvent] - openwebnet_bus_thermostat_F454_000350860367_1_setpointTemperature predicted to become 25 °C
==> /var/log/openhab2/openhab.log <==
2019-12-07 18:21:59.791 [DEBUG] [ebnet.handler.OpenWebNetThingHandler] - ==OWN:ThingHandler== handleCommand() (command=25 °C - channel=openwebnet:bus_thermostat:F454_000350860367:1:setpointTemperature)
2019-12-07 18:21:59.796 [DEBUG] [er.OpenWebNetThermoregulationHandler] - ==OWN:ThermoHandler== handleSetpointCommand() (command=25 °C)
2019-12-07 18:21:59.799 [DEBUG] [.openwebnet.message.Thermoregulation] - ====TEMPERATURE 25.0 --> : <0250>
2019-12-07 18:21:59.803 [INFO ] [g.openwebnet.bus.MyHomeJavaConnector] - COM SENDING ============>>>>>>>>>>>> *#4*1*#14*0250*3##
==> /var/log/openhab2/events.log <==
2019-12-07 18:21:59.815 [vent.ItemStateChangedEvent] - openwebnet_bus_thermostat_F454_000350860367_1_setpointTemperature changed from 22 °C to 25 °C
==> /var/log/openhab2/openhab.log <==
2019-12-07 18:21:59.895 [INFO ] [g.openwebnet.bus.MyHomeSocketFactory] - COM RECEIVED <<<<<<<<<<<<============ *#*1##
2019-12-07 18:22:02.067 [DEBUG] [org.openwebnet.bus.MyHomeConnection ] - ##gw-openwebnet-conn## sending MON keepalive ACK
2019-12-07 18:22:02.071 [DEBUG] [org.openwebnet.bus.MyHomeConnection ] - MON SENDING ======>>>>>> *#*1##
I have an F454 gateway and my openhab version is 2.4.0. I changed the temperature from the setpoint but target temperature does not change
Ciao Massimo,
as I said for sure I am doing something wrong I followed your example to have a version of both files .items and .things.
Here below I provide the content of both files, I hope you can easily see why I am messing up 
Thanks for your support.
Group gCucina
Group gSalone
Group gMartina
Group gDaniel
Group gBagnoDoccia
Group gBagnoVasca
Group gMatrimoniale
Group gGiardino
Group gTh_Matrimoniale
Group gTh_Salone
Group gTh_Cucina
Group gTh_Bagni
Group gTh_Martina
Group gTh_Daniel
Group gShutters
Switch iCu_Lampadario "Lampadario Cucina" <light> (gCucina) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Cu_Lampadario:switch" }
Switch iCu_Faretti "Faretti Cucina" <light> (gCucina) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Cu_Faretti:switch" }
Switch iCu_Lavanderia "Faretti Lavanderia" <light> (gCucina) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Cu_Lavanderia:switch" }
Switch iCu_LED "LED Cucina" <light> (gCucina) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Cu_LED:switch" }
Switch iSa_Lampada_Pranzo "Lampada Pranzo" <light> (gSalone) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Sa_Lampada_Pranzo:switch" }
Switch iSa_Faretti_Ingresso "Faretti Ingresso" <light> (gSalone) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Sa_Faretti_Ingresso:switch" }
Switch iSa_LED_Pranzo "LED Pranzo" <light> (gSalone) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Sa_LED_Pranzo:switch" }
Switch iSa_LED_TV "LED TV" <light> (gSalone) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Sa_LED_TV:switch" }
Switch iSa_LED_Serra "LED Serra" <light> (gSalone) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Sa_LED_Serra:switch" }
Switch iSa_Faretti_Serra "Faretti Serra" <light> (gSalone) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Sa_Faretti_Serra:switch" }
Dimmer iSa_Faretti_TV "Faretti TV [%.0f %%]" <DimmableLight> (gSalone) [ "Lighting" ] { channel="openwebnet:bus_dimmer:mybridge:Sa_Faretti_TV:brightness" }
Switch iSa_Lampada_TV "Lampada TV" <light> (gSalone) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Sa_Lampada_TV:switch" }
Switch iSa_LED_Guardaroba "LED Guardaroba" <light> (gSalone) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Sa_LED_Guardaroba:switch" }
Switch iMa_Lampadario "Lampadario Martina" <light> (gMartina) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Ma_Lampadario:switch" }
Switch iMa_Faretti "Faretti Martina" <light> (gMartina) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Ma_Faretti:switch" }
Switch iMa_Lume "Lume Martina" <light> (gMartina) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Ma_Lume:switch" }
Switch iMa_LED "LED Martina" <light> (gMartina) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Ma_LED:switch" }
Switch iDa_Lampadario "Lampadario Daniel" <light> (gDaniel) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Da_Lampadario:switch" }
Switch iDa_Faretti "Faretti Daniel" <light> (gDaniel) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Da_Faretti:switch" }
Switch iDa_Lume "Lume Daniel" <light> (gDaniel) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Da_Lume:switch" }
Switch iDa_LED "LED Daniel" <light> (gDaniel) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Da_LED:switch" }
Switch iBd_Faretti "Faretti Bagno Doccia" <light> (gBagnoDoccia) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Bd_Faretti:switch" }
Switch iBd_Specchio "Luce Specchio Doccia" <light> (gBagnoDoccia) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Bd_Specchio:switch" }
Switch iBd_LED "LED Doccia" <light> (gBagnoDoccia) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Bd_LED:switch" }
Switch iBv_Faretti "Faretti Bagno Vasca" <light> (gBagnoVasca) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Bv_Faretti:switch" }
Switch iBv_Specchio "Luce Specchio Vasca" <light> (gBagnoVasca) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Bv_Specchio:switch" }
Switch iCm_Lampada "Lampada Matrimoniale" <light> (gMatrimoniale) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Cm_Lampada:switch" }
Switch iCm_Faretti "Faretti Armadio" <light> (gMatrimoniale) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Cm_Faretti:switch" }
Switch iCm_Gabriele "Lume Gabriele" <light> (gMatrimoniale) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Cm_Gabriele:switch" }
Switch iCm_Marina "Lume Marina" <light> (gMatrimoniale) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Cm_Marina:switch" }
Switch iCm_LED "LED Matrimoniale" <light> (gMatrimoniale) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Cm_LED:switch" }
Switch iGi_Cucina "Luci Esterno Cucina" <light> (gGiardino) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Gi_Cucina:switch" }
Switch iGi_Paletti_Alto "Paletti Giardino Alto" <light> (gGiardino) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Gi_Paletti_Alto:switch" }
Switch iGi_Parete "Luci Parete Giardino" <light> (gGiardino) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Gi_Parete:switch" }
Switch iGi_Scala "Luci Scala Giardino" <light> (gGiardino) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Gi_Scala:switch" }
Switch iGi_Terrazzo "Luci Terrazzo" <light> (gGiardino) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Gi_Terrazzo:switch" }
Switch iGi_ScalaExt "Luci Scala Esterna" <light> (gGiardino) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Gi_ScalaExt:switch" }
Switch iGi_Paletti_Basso "Paletti Giardino Basso" <light> (gGiardino) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Gi_Paletti_Basso:switch" }
Switch iGi_Fontana_L "Luce Fontana" <light> (gGiardino) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Gi_Fontana_L:switch" }
Switch iGi_Fontana_W "Acqua Fontana" <light> (gGiardino) [ "Lighting" ] { channel="openwebnet:bus_on_off_switch:mybridge:Gi_Fontana_W:switch" }
Rollershutter iTp_Pranzo "Tapparella Pranzo [%.0f %%]" <rollershutter> (gShutters, gSalone) [ "Blinds" ] { channel="openwebnet:bus_automation:mybridge:Tp_Pranzo:shutter" }
Rollershutter iTp_TV "Tapparella TV [%.0f %%]" <rollershutter> (gShutters, gSalone) [ "Blinds" ] { channel="openwebnet:bus_automation:mybridge:Tp_TV:shutter" }
Rollershutter iTp_Gabriele "Tapparella Gabriele [%.0f %%]" <rollershutter> (gShutters, gMatrimoniale) [ "Blinds" ] { channel="openwebnet:bus_automation:mybridge:Tp_Gabriele:shutter" }
Rollershutter iTp_Marina "Tapparella Marina [%.0f %%]" <rollershutter> (gShutters, gMatrimoniale) [ "Blinds" ] { channel="openwebnet:bus_automation:mybridge:Tp_Marina:shutter" }
Rollershutter iTp_Martina "Tapparella Martina [%.0f %%]" <rollershutter> (gShutters, gMartina) [ "Blinds" ] { channel="openwebnet:bus_automation:mybridge:Tp_Martina:shutter" }
Rollershutter iTp_Daniel "Tapparella Daniel [%.0f %%]" <rollershutter> (gShutters, gDaniel) [ "Blinds" ] { channel="openwebnet:bus_automation:mybridge:Tp_Daniel:shutter" }
Rollershutter iTp_Daniel "Tapparella Bagno Vasca [%.0f %%]" <rollershutter> (gShutters, gBagnoVasca) [ "Blinds" ] { channel="openwebnet:bus_automation:mybridge:Tp_Vasca:shutter" }
Rollershutter iTp_Doccia1 "Tapparella Bagno Doccia 1 [%.0f %%]" <rollershutter> (gShutters, gBagnoDoccia) [ "Blinds" ] { channel="openwebnet:bus_automation:mybridge:Tp_Doccia1:shutter" }
Rollershutter iTp_Doccia2 "Tapparella Bagno Doccia 2 [%.0f %%]" <rollershutter> (gShutters, gBagnoDoccia) [ "Blinds" ] { channel="openwebnet:bus_automation:mybridge:Tp_Doccia2:shutter" }
Group gTh_Salone "Termostato Salone" [ "Thermostat" ]
Number:Temperature iTh_Sa_temp "Temperature [%.1f °C]" <temperature> (gTh_Salone) [ "CurrentTemperature" ] { channel="openwebnet:bus_thermostat:mybridge:Th_Salone:temperature" }
String iTh_Sa_offset "Offset" (gTh_Salone) { channel="openwebnet:bus_thermostat:mybridge:Th_Salone:localMode" }
Switch iTh_Sa_heating "Heating is" (gTh_Salone) { channel="openwebnet:bus_thermostat:mybridge:Th_Salone:heating" }
Switch iTh_Sa_cooling "Cooling is" (gTh_Salone) { channel="openwebnet:bus_thermostat:mybridge:Th_Salone:cooling" }
Number:Temperature iTh_Sa_targetTemp "Target [%.1f °C]" (gTh_Salone) { channel="openwebnet:bus_thermostat:mybridge:Th_Salone:targetTemperature" }
String iTh_Sa_activeMode "Active Mode" (gTh_Salone) { channel="openwebnet:bus_thermostat:mybridge:Th_Salone:activeMode" }
String iTh_Sa_heatCool "HeatingCoolingMode" (gTh_Salone) [ "homekit:HeatingCoolingMode" ] { channel="openwebnet:bus_thermostat:mybridge:Th_Salone:heatingCoolingMode" }
Number:Temperature iTh_Sa_setpointTemp "Setpoint Temperature [%.1f °C]" <temperature> (gTh_Salone) [ "TargetTemperature" ] { channel="openwebnet:bus_thermostat:mybridge:Th_Salone:setpointTemperature" }
String iTh_Sa_setMode "Set Mode" (gTh_Salone) { channel="openwebnet:bus_thermostat:mybridge:Th_Salone:setMode"}
Group gTh_Cucina "Termostato Cucina" [ "Thermostat" ]
Number:Temperature iTh_Cu_temp "Temperature [%.1f °C]" <temperature> (gTh_Cucina) [ "CurrentTemperature" ] { channel="openwebnet:bus_thermostat:mybridge:Th_Cucina:temperature" }
String iTh_Cu_offset "Offset" (gTh_Cucina) { channel="openwebnet:bus_thermostat:mybridge:Th_Cucina:localMode" }
Switch iTh_Cu_heating "Heating is" (gTh_Cucina) { channel="openwebnet:bus_thermostat:mybridge:Th_Cucina:heating" }
Switch iTh_Cu_cooling "Cooling is" (gTh_Cucina) { channel="openwebnet:bus_thermostat:mybridge:Th_Cucina:cooling" }
Number:Temperature iTh_Cu_targetTemp "Target [%.1f °C]" (gTh_Cucina) { channel="openwebnet:bus_thermostat:mybridge:Th_Cucina:targetTemperature" }
String iTh_Cu_activeMode "Active Mode" (gTh_Cucina) { channel="openwebnet:bus_thermostat:mybridge:Th_Cucina:activeMode" }
String iTh_Cu_heatCool "HeatingCoolingMode" (gTh_Cucina) [ "homekit:HeatingCoolingMode" ] { channel="openwebnet:bus_thermostat:mybridge:Th_Cucina:heatingCoolingMode" }
Number:Temperature iTh_Cu_setpointTemp "Setpoint Temperature [%.1f °C]" <temperature> (gTh_Cucina) [ "TargetTemperature" ] { channel="openwebnet:bus_thermostat:mybridge:Th_Cucina:setpointTemperature" }
String iTh_Cu_setMode "Set Mode" (gTh_Cucina) { channel="openwebnet:bus_thermostat:mybridge:Th_Cucina:setMode"}
Group gTh_Matrimoniale "Termostato Camera Matrimoniale" [ "Thermostat" ]
Number:Temperature iTh_Cm_temp "Temperature [%.1f °C]" <temperature> (gTh_Matrimoniale) [ "CurrentTemperature" ] { channel="openwebnet:bus_thermostat:mybridge:Th_Matrimoniale:temperature" }
String iTh_Cm_offset "Offset" (gTh_Matrimoniale) { channel="openwebnet:bus_thermostat:mybridge:Th_Matrimoniale:localMode" }
Switch iTh_Cm_heating "Heating is" (gTh_Matrimoniale) { channel="openwebnet:bus_thermostat:mybridge:Th_Matrimoniale:heating" }
Switch iTh_Cm_cooling "Cooling is" (gTh_Matrimoniale) { channel="openwebnet:bus_thermostat:mybridge:Th_Matrimoniale:cooling" }
Number:Temperature iTh_Cm_targetTemp "Target [%.1f °C]" (gTh_Matrimoniale) { channel="openwebnet:bus_thermostat:mybridge:Th_Matrimoniale:targetTemperature" }
String iTh_Cm_activeMode "Active Mode" (gTh_Matrimoniale) { channel="openwebnet:bus_thermostat:mybridge:Th_Matrimoniale:activeMode" }
String iTh_Cm_heatCool "HeatingCoolingMode" (gTh_Matrimoniale) [ "homekit:HeatingCoolingMode" ] { channel="openwebnet:bus_thermostat:mybridge:Th_Matrimoniale:heatingCoolingMode" }
Number:Temperature iTh_Cm_setpointTemp "Setpoint Temperature [%.1f °C]" <temperature> (gTh_Matrimoniale) [ "TargetTemperature" ] { channel="openwebnet:bus_thermostat:mybridge:Th_Matrimoniale:setpointTemperature" }
String iTh_Cm_setMode "Set Mode" (gTh_Matrimoniale) { channel="openwebnet:bus_thermostat:mybridge:Th_Matrimoniale:setMode"}
Group gTh_Martina "Termostato Camera Martina" [ "Thermostat" ]
Number:Temperature iTh_Ma_temp "Temperature [%.1f °C]" <temperature> (gTh_Martina) [ "CurrentTemperature" ] { channel="openwebnet:bus_thermostat:mybridge:Th_Martina:temperature" }
String iTh_Ma_offset "Offset" (gTh_Martina) { channel="openwebnet:bus_thermostat:mybridge:Th_Martina:localMode" }
Switch iTh_Ma_heating "Heating is" (gTh_Martina) { channel="openwebnet:bus_thermostat:mybridge:Th_Martina:heating" }
Switch iTh_Ma_cooling "Cooling is" (gTh_Martina) { channel="openwebnet:bus_thermostat:mybridge:Th_Martina:cooling" }
Number:Temperature iTh_Ma_targetTemp "Target [%.1f °C]" (gTh_Martina) { channel="openwebnet:bus_thermostat:mybridge:Th_Martina:targetTemperature" }
String iTh_Ma_activeMode "Active Mode" (gTh_Martina) { channel="openwebnet:bus_thermostat:mybridge:Th_Martina:activeMode" }
String iTh_Ma_heatCool "HeatingCoolingMode" (gTh_Martina) [ "homekit:HeatingCoolingMode" ] { channel="openwebnet:bus_thermostat:mybridge:Th_Martina:heatingCoolingMode" }
Number:Temperature iTh_Ma_setpointTemp "Setpoint Temperature [%.1f °C]" <temperature> (gTh_Martina) [ "TargetTemperature" ] { channel="openwebnet:bus_thermostat:mybridge:Th_Martina:setpointTemperature" }
String iTh_Ma_setMode "Set Mode" (gTh_Martina) { channel="openwebnet:bus_thermostat:mybridge:Th_Martina:setMode"}
Group gTh_Daniel "Termostato Camera Daniel" [ "Thermostat" ]
Number:Temperature iTh_Da_temp "Temperature [%.1f °C]" <temperature> (gTh_Daniel) [ "CurrentTemperature" ] { channel="openwebnet:bus_thermostat:mybridge:Th_Daniel:temperature" }
String iTh_Da_offset "Offset" (gTh_Daniel) { channel="openwebnet:bus_thermostat:mybridge:Th_Daniel:localMode" }
Switch iTh_Da_heating "Heating is" (gTh_Daniel) { channel="openwebnet:bus_thermostat:mybridge:Th_Daniel:heating" }
Switch iTh_Da_cooling "Cooling is" (gTh_Daniel) { channel="openwebnet:bus_thermostat:mybridge:Th_Daniel:cooling" }
Number:Temperature iTh_Da_targetTemp "Target [%.1f °C]" (gTh_Daniel) { channel="openwebnet:bus_thermostat:mybridge:Th_Daniel:targetTemperature" }
String iTh_Da_activeMode "Active Mode" (gTh_Daniel) { channel="openwebnet:bus_thermostat:mybridge:Th_Daniel:activeMode" }
String iTh_Da_heatCool "HeatingCoolingMode" (gTh_Daniel) [ "homekit:HeatingCoolingMode" ] { channel="openwebnet:bus_thermostat:mybridge:Th_Daniel:heatingCoolingMode" }
Number:Temperature iTh_Da_setpointTemp "Setpoint Temperature [%.1f °C]" <temperature> (gTh_Daniel) [ "TargetTemperature" ] { channel="openwebnet:bus_thermostat:mybridge:Th_Daniel:setpointTemperature" }
String iTh_Da_setMode "Set Mode" (gTh_Daniel) { channel="openwebnet:bus_thermostat:mybridge:Th_Daniel:setMode"}
Group gTh_Bagni "Termostato Bagni" [ "Thermostat" ]
Number:Temperature iTh_Ba_temp "Temperature [%.1f °C]" <temperature> (gTh_Bagni) [ "CurrentTemperature" ] { channel="openwebnet:bus_thermostat:mybridge:Th_Bagni:temperature" }
String iTh_Ba_offset "Offset" (gTh_Bagni) { channel="openwebnet:bus_thermostat:mybridge:Th_Bagni:localMode" }
Switch iTh_Ba_heating "Heating is" (gTh_Bagni) { channel="openwebnet:bus_thermostat:mybridge:Th_Bagni:heating" }
Switch iTh_Ba_cooling "Cooling is" (gTh_Bagni) { channel="openwebnet:bus_thermostat:mybridge:Th_Bagni:cooling" }
Number:Temperature iTh_Ba_targetTemp "Target [%.1f °C]" (gTh_Bagni) { channel="openwebnet:bus_thermostat:mybridge:Th_Bagni:targetTemperature" }
String iTh_Ba_activeMode "Active Mode" (gTh_Bagni) { channel="openwebnet:bus_thermostat:mybridge:Th_Bagni:activeMode" }
String iTh_Ba_heatCool "HeatingCoolingMode" (gTh_Bagni) [ "homekit:HeatingCoolingMode" ] { channel="openwebnet:bus_thermostat:mybridge:Th_Bagni:heatingCoolingMode" }
Number:Temperature iTh_Ba_setpointTemp "Setpoint Temperature [%.1f °C]" <temperature> (gTh_Bagni) [ "TargetTemperature" ] { channel="openwebnet:bus_thermostat:mybridge:Th_Bagni:setpointTemperature" }
String iTh_Ba_setMode "Set Mode" (gTh_Bagni) { channel="openwebnet:bus_thermostat:mybridge:Th_Bagni:setMode"}
Bridge openwebnet:bus_gateway:mybridge "MyHOME" [ host="192.168.0.156", passwd="12345", port=20000, discoveryByActivation=false ] {
bus_on_off_switch Cu_Lampadario "Lampadario Cucina" [ where="24" ]
bus_on_off_switch Cu_Faretti "Faretti Cucina" [ where="23" ]
bus_on_off_switch Cu_Lavanderia "Faretti Lavanderia" [ where="22" ]
bus_on_off_switch Cu_LED "LED Cucina" [ where="04" ]
bus_on_off_switch Sa_Lampada_Pranzo "Lampada Pranzo" [ where="42" ]
bus_on_off_switch Sa_Faretti_Ingresso "Faretti Ingresso" [ where="21" ]
bus_on_off_switch Sa_Faretti_Pranzo "Faretti Pranzo" [ where="0111" ]
bus_on_off_switch Sa_LED_Pranzo "LED Pranzo" [ where="19" ]
bus_on_off_switch Sa_LED_TV "LED TV" [ where="0115" ]
bus_on_off_switch Sa_LED_Serra "LED Serra" [ where="0114" ]
bus_on_off_switch Sa_Faretti_Serra "Faretti Serra" [ where="0113" ]
bus_dimmer Sa_Faretti_TV "Faretti TV" [ where="47#4#01" ]
bus_on_off_switch Sa_Lampada_TV "Lampada TV" [ where="0110" ]
bus_on_off_switch Sa_LED_Guardaroba "LED Guardaroba" [ where="17" ]
bus_on_off_switch Cm_Lampada "Lampada Matrimoniale" [ where="27" ]
bus_on_off_switch Cm_Faretti "Faretti Armadio" [ where="0313" ]
bus_on_off_switch Cm_Gabriele "Lume Gabriele" [ where="25" ]
bus_on_off_switch Cm_Marina "Lume Marina" [ where="26" ]
bus_on_off_switch Cm_LED "LED Matrimoniale" [ where="28" ]
bus_on_off_switch Ma_Lampadario "Lampadario Martina" [ where="36" ]
bus_on_off_switch Ma_Faretti "Faretti Martina" [ where="37" ]
bus_on_off_switch Ma_Lume "Lume Martina" [ where="39" ]
bus_on_off_switch Ma_LED "LED Martina" [ where="38" ]
bus_on_off_switch Da_Lampadario "Lampadario Daniel" [ where="34" ]
bus_on_off_switch Da_Faretti "Faretti Daniel" [ where="35" ]
bus_on_off_switch Da_Lume "Lume Daniel" [ where="33" ]
bus_on_off_switch Da_LED "LED Daniel" [ where="32" ]
bus_on_off_switch Bv_Faretti "Faretti Bagno Vasca" [ where="15" ]
bus_on_off_switch Bv_Specchio "Luce Specchio Vasca" [ where="14" ]
bus_on_off_switch Bd_Faretti "Faretti Bagno Doccia" [ where="31" ]
bus_on_off_switch Bd_Specchio "Luce Specchio Doccia" [ where="0214" ]
bus_on_off_switch Bd_LED "LED Doccia" [ where="0215" ]
bus_automation Tp_Pranzo "Tapparella Pranzo" [ where="08", shutterRun=AUTO]
bus_automation Tp_TV "Tapparella TV" [ where="03", shutterRun=AUTO]
bus_automation Tp_Gabriele "Tapparella Gabriele" [ where="06", shutterRun=AUTO]
bus_automation Tp_Marina "Tapparella Marina" [ [ where="11", shutterRun=AUTO]
bus_automation Tp_Martina "Tapparella Martina" [ where="0010", shutterRun=AUTO]
bus_automation Tp_Daniel "Tapparella Daniel" [ where="0014", shutterRun=AUTO]
bus_automation Tp_Vasca "Tapparella Bagno Vasca" [ where="02", shutterRun=AUTO]
bus_automation Tp_Doccia1 "Tapparella Bagno Doccia 1" [ where="13", shutterRun=AUTO]
bus_automation Tp_Doccia2 "Tapparella Bagno Doccia 2" [ where="49", shutterRun=AUTO]
bus_thermostat Th_Salone "Termostato Salone" [ where="1" ]
bus_thermostat Th_Cucina "Termostato Cucina" [ where="2" ]
bus_thermostat Th_Matrimoniale "Termostato Matrimoniale" [ where="3" ]
bus_thermostat Th_Martina "Termostato Martina" [ where="4" ]
bus_thermostat Th_Daniel "Termostato Daniel" [ where="5" ]
bus_thermostat Th_Bagni "Termostato Bagni" [ where="6" ]
bus_on_off_switch Gi_Cucina "Luci Esterno Cucina" [ where="0212" ]
bus_on_off_switch Gi_Paletti_Alto "Paletti Giardino Alto" [ where="29" ]
bus_on_off_switch Gi_Parete "Luci Parete Giardino" [ where="0211" ]
bus_on_off_switch Gi_Scala "Luci Scala Giardino" [ where="45" ]
bus_on_off_switch Gi_Terrazzo "Luci Terrazzo" [ where="0210" ]
bus_on_off_switch Gi_ScalaExt "Luci Scala Esterna" [ where="46" ]
bus_on_off_switch Gi_Paletti_Basso "Paletti Giardino Basso" [ where="44" ]
bus_on_off_switch Gi_Fontana_L "Luce Fontana" [ where="0413" ]
bus_on_off_switch Gi_Fontana_W "Acqua Fontana" [ where="0412" ]
}