Hey everyone, I’m trying to use openHab. I installed openhabian on my RPI4. I can use it with my computer. Now I want to integrate my zigbee dongle. I bought the dongle from sonoff named Zigbee 3.0 USB dongle plus. I also bought a temperature sensor from Tuya. I want to connect all of them to …

OK: I found the option to enable debug logging: [19:33:24] root@openhabian:/# cat ./var/log/openhab/openhab.log | grep DEBUG 2025-02-09 19:32:24.996 [DEBUG] [e.ember.internal.EmberHandlerFactory] - bundle org.openhab.binding.zigbee.ember:4.0.1 (264)[org.openhab.binding.zigbee.ember.internal.EmberH…

I need to see more data. The first part (95%) of this is just the binding loading - only the last 3 lines are logging from the binding itself and this is just the very first part of the initialisation where it’s printing the configuration and before initialisation starts.

[image] switch: 2025-02-09 19:32:29.395 2025-02-09 19:32:29.395 is the last entry. I’m thinking that my Raspberry Pi3 just can’t handle this version of OpenHAB. GUI becomes unresponsive. [image]

I may be remembering wrongly here as it has been a while but I sort of recall that one of the early versions of OpenHAB 4 had an issue related to serial ports that was fixed in a minor upgrade or someone provided an alternate driver package you might try that package from this link [ima…

I gave up on the Raspberry Pi 3. Starting from scratch with new Raspberry Pi 5 and openHAB 4.3.2 Based on this: Serial Port Configuration | openHAB I used openhabian-config to prepare serial port [image] Rebooted Added the ZigBee Binding. Manually added the Ember Controller thing. Still in…

[image] switch: Not sure exactly what to set to debug set com.zsmartsystems.zigbee also to debug. You should view the log using the log file itself - othewise the system will only “display” the last 100 entries - so your grep will show any zigbee log entries in the last 100 entries, and here…

at jdk.internal.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) ~[?:?] at java.lang.reflect.Method.invoke(Method.java:569) ~[?:?] at org.apache.cxf.service.invoker.AbstractInvoker.performInvocation(AbstractInvoker.java:179) ~[bundleFile:3.6.2] …

[image] switch: 2025-02-12 03:08:03.954 [ERROR] [nding.zigbee.serial.ZigBeeSerialPort] - Serial Error: Port [/dev/ttyUSB0] does not exist. 2025-02-12 03:08:03.955 [ERROR] [zigbee.dongle.ember.ZigBeeDongleEzsp] - EZSP Dongle: Unable to open serial port It seems the serial port doesn’t exist.

I think that was a test I did. I saw in the documentation that this port was selected so I tried that and got a comm error. The port I selected originally and the one I’ve been troubleshooting is [image] which looks right since is says Sonoff

Well, I don’t see this port being used in the log. With this log that you’ve provided, the only port I see trying to be opened, and the only initialisation of the binding, it uses /dev/ttyUSB0.

openHAB Community

Connect sonoff dongle

Setup, Configuration and Use Beginners

MikeJMajor (Mike Major) February 16, 2025, 6:39pm 36

The documentation has already been updated in main, I guess we need to wait until OH 5.0 to see it.