I started having a problem the other day with my entire automation system going offline. Google home just returns “cannot reach openhab” the home app shows everything “offline” and paperui just returns “503 jersey not ready yet” on anything I click. The only fix is to reboot but sometimes i have to …

I am marking this as solved. Solution was as follows: Clear cache - uninstall unused bindings - backup and reinstall openhab using commands above. With a check for proper functioning between each step. I am having an issue with my thermostat not connecting properly to Google assistant but I belie…

[image] Hotrodwinston: and paperui just returns “503 jersey not ready yet” I had that a while ago and solved it by clearing the cache: [image] Clear the Cache Solutions Often when one encounters a problem with OH, particularly after an update, OH will r…

I’ll give that a try once I get home this afternoon.

Ok that seems to have completely broken my system. Now when I restart the computer openhab does not start. Trying to start the service looks fine but it does not actually start unless I start the cli version. I have tried reloading the daemon and re-enabling the service but no luck. If I shut down …

[image] Hotrodwinston: Ok that seems to have completely broken my system. That normally indicates that there was something fundamentely wrong before clearing the cache. Which errors messages do you see in openhab.log?

How much free space is there on the tablet? I’ve seen strange behaviour on systems with low or no free space.

I took a quick peek before running out the door - I can load the log later if needed. But the errors (and there were a lot) seemed to be mostly Apache with a bunch of java erreors mixed in. As to @higgers question I have 110gb free on a 128 GB SSD that is 2 years old and passed all health checks be…

Here is the log. https://drive.google.com/file/d/1wUqtflpiA2yNuRQcX2qYiyQEh2PA1qDq/view?usp=sharing Thank you for your help.

[image] Hotrodwinston: Here is the log. That’s a real mess :sunglasses: Are you sure all those errors where not there before clearing the cache? Configuration model '(1)_new_rule.rules' has errors, therefore ignoring it: [17,20]: no viable alternative at input 'Item' Unable to find any conf…

java is “zulu 8.33.0.1-linux64” I didn’t check log before (I honestly had to figure out how to get this log). I am going to be deleting my rules (they were just for testing how it worked) and any bindings i am not actually using today. Try to limit what can be causing the problem. It works right…

Ok I cleared out the rules and a bunch of unused bindings and services then rebooted and started openhab via cli then shut it down and attempted to start via service (which failed) and then opened via cli and pulled the log again. https://drive.google.com/file/d/1wUqtflpiA2yNuRQcX2qYiyQEh2PA1qDq/vi…

Constant "503 jersey not ready"

Setup, Configuration and Use Beginners

sihui (SiHui) November 16, 2019, 5:59pm 2

I had that a while ago and solved it by clearing the cache: