eBUS Binding 3.x [3.4.0;3.9.9)

dk8pn · February 6, 2023, 7:58am

If anybody is interested in more expert mode parameters, fell free to ask me. Have a Vaillant aroTherm plus heatpump VML105/6 (year 2020).

ComJack85 · February 14, 2023, 2:11pm

I have now installed the ebusd and can probably read data. Is ebusd not integrated in the ebus binding? Do I still have to set something in OH at the master / slave addresses?

pi@openhabian:~ $ tail -f /var/log/ebusd.log
2023-02-14 14:52:53.773 [bus error] device status: unexpected available enhanced byte 2
2023-02-14 14:52:53.817 [bus notice] signal acquired
2023-02-14 14:52:54.002 [bus notice] device status: reset, supports info
2023-02-14 14:52:54.082 [bus notice] device status: extra info: firmware 1.1[7f16].2[73c8], jumpers 0x33
2023-02-14 14:52:54.673 [bus notice] new master 10, master count 2
2023-02-14 14:52:54.737 [bus notice] new master 03, master count 3
2023-02-14 14:52:54.737 [update notice] received unknown MS cmd: 1008b503020001 / 0affffffffffffffffffff
2023-02-14 14:52:55.018 [update notice] received unknown MS cmd: 1008b503020002 / 0affffffffffffffffffff
2023-02-14 14:52:55.298 [update notice] received unknown MS cmd: 1008b503020003 / 0a0800ffffffffffffffff
2023-02-14 14:52:55.579 [update notice] received unknown MS cmd: 1008b503020004 / 0affffffffffffffffffff
2023-02-14 14:52:56.674 [update notice] received unknown MS cmd: 1008b51009000034ffffff04ff00 / 0101
2023-02-14 14:52:56.940 [update notice] received unknown MS cmd: 1008b5110100 / 089e010e0008000003
2023-02-14 14:52:57.213 [update notice] received unknown MS cmd: 1008b5110101 / 09333400803e670000ff
2023-02-14 14:53:03.879 [bus notice] scan 08: ;Vaillant;BAI00;0205;9602
2023-02-14 14:53:03.879 [update notice] store 08 ident: done
2023-02-14 14:53:03.880 [update notice] sent scan-read scan.08  QQ=31: Vaillant;BAI00;0205;9602
2023-02-14 14:53:03.880 [bus notice] scan 08: ;Vaillant;BAI00;0205;9602
2023-02-14 14:53:04.369 [main notice] read common config file vaillant/broadcast.csv
2023-02-14 14:53:04.517 [main notice] read common config file vaillant/scan.csv
2023-02-14 14:53:04.623 [main notice] read common config file vaillant/general.csv
2023-02-14 14:53:04.751 [main notice] read scan config file vaillant/08.bai.csv for ID "bai00", SW0205, HW9602
2023-02-14 14:53:04.933 [update notice] sent scan-read scan.08 id QQ=31:
2023-02-14 14:53:05.078 [update notice] sent scan-read scan.08 id QQ=31:
2023-02-14 14:53:05.222 [update notice] sent scan-read scan.08 id QQ=31:
2023-02-14 14:53:05.366 [update notice] sent scan-read scan.08 id QQ=31: 21;20;06;0010015601;3100;005185;N8
2023-02-14 14:53:05.738 [main notice] found messages: 202 (2 conditional on 27 conditions, 0 poll, 10 update)
2023-02-14 14:53:05.899 [update notice] sent scan-read scan.08 id QQ=31: 21;20;06;0010015601;3100;005185;N8
2023-02-14 14:53:06.013 [bus notice] max. symbols per second: 104
2023-02-14 14:53:06.043 [update notice] sent scan-read scan.08 id QQ=31: 21;20;06;0010015601;3100;005185;N8
2023-02-14 14:53:06.187 [update notice] sent scan-read scan.08 id QQ=31: 21;20;06;0010015601;3100;005185;N8
2023-02-14 14:53:06.332 [update notice] sent scan-read scan.08 id QQ=31: 21;20;06;0010015601;3100;005185;N8
2023-02-14 14:53:06.332 [bus notice] scan 08: ;21;20;06;0010015601;3100;005185;N8
2023-02-14 14:53:06.727 [update notice] received unknown MS cmd: 1008b5110100 / 089e010e0008000003
2023-02-14 14:53:06.997 [update notice] received read bai Status01 QQ=10: 25.5;26.0;-;31.0;51.5;off
2023-02-14 14:53:07.044 [bus notice] max. symbols per second: 105
2023-02-14 14:53:07.257 [update notice] received read bai Status02 QQ=10: auto;60;75.0;70;65.0
2023-02-14 14:53:07.527 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:53:08.489 [bus notice] scan 15: ;Vaillant;SCC00;0500;3903
2023-02-14 14:53:08.490 [update notice] store 15 ident: done
2023-02-14 14:53:08.490 [update notice] sent scan-read scan.15  QQ=31: Vaillant;SCC00;0500;3903
2023-02-14 14:53:08.490 [bus notice] scan 15: ;Vaillant;SCC00;0500;3903
2023-02-14 14:53:08.632 [update notice] sent unknown MS cmd: 3115b5090124 / 09003231323032383030
2023-02-14 14:53:08.774 [update notice] sent scan-read scan.15 id QQ=31:
2023-02-14 14:53:08.916 [update notice] sent scan-read scan.15 id QQ=31:
2023-02-14 14:53:09.012 [bus notice] max. symbols per second: 106
2023-02-14 14:53:09.058 [update notice] sent scan-read scan.15 id QQ=31: 21;20;28;0020197222;0932;007013;N7
2023-02-14 14:53:09.058 [bus notice] scan 15: ;21;20;28;0020197222;0932;007013;N7
2023-02-14 14:53:09.185 [main error] unable to load scan config 15: no file from vaillant with prefix 15 matches ID "scc00", SW0500, HW3903
2023-02-14 14:53:09.185 [main error] scan config 15: ERR: element not found
2023-02-14 14:53:16.715 [update notice] received unknown MS cmd: 1008b5110100 / 089e010e0008000003
2023-02-14 14:53:16.983 [update notice] received read bai Status01 QQ=10: 25.5;26.0;-;31.0;51.5;off
2023-02-14 14:53:17.258 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:53:26.766 [update notice] received unknown MS cmd: 1008b5110100 / 089e010e0008000003
2023-02-14 14:53:27.038 [update notice] received read bai Status01 QQ=10: 25.5;26.0;-;31.0;51.5;off
2023-02-14 14:53:27.314 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:53:36.742 [update notice] received unknown MS cmd: 1008b5110100 / 089e010e0008000003
2023-02-14 14:53:37.011 [update notice] received read bai Status01 QQ=10: 25.5;26.0;-;31.0;51.5;off
2023-02-14 14:53:37.271 [update notice] received read bai Status02 QQ=10: auto;60;75.0;70;65.0
2023-02-14 14:53:37.547 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:53:46.753 [update notice] received unknown MS cmd: 1008b5110100 / 089e010e0008000003
2023-02-14 14:53:47.026 [update notice] received read bai Status01 QQ=10: 25.5;26.0;-;31.0;51.5;off
2023-02-14 14:53:47.301 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:53:54.837 [update notice] received read bai currenterror QQ=10: -;-;-;-;-
2023-02-14 14:53:55.118 [update notice] received unknown MS cmd: 1008b503020002 / 0affffffffffffffffffff
2023-02-14 14:53:55.398 [update notice] received unknown MS cmd: 1008b503020003 / 0a0800ffffffffffffffff
2023-02-14 14:53:55.679 [update notice] received unknown MS cmd: 1008b503020004 / 0affffffffffffffffffff
2023-02-14 14:53:56.768 [update notice] received unknown MS cmd: 1008b5110100 / 089e010e0008000003
2023-02-14 14:53:57.041 [update notice] received read bai Status01 QQ=10: 25.5;26.0;-;31.0;51.5;off
2023-02-14 14:53:57.316 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:54:06.831 [update notice] received unknown MS cmd: 1008b5110100 / 089e010e0008000003
2023-02-14 14:54:07.104 [update notice] received read bai Status01 QQ=10: 25.5;26.0;-;31.0;51.5;off
2023-02-14 14:54:07.360 [update notice] received read bai Status02 QQ=10: auto;60;75.0;70;65.0
2023-02-14 14:54:07.632 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:54:16.730 [update notice] received unknown MS cmd: 1008b5110100 / 089e010e0008000003
2023-02-14 14:54:16.999 [update notice] received read bai Status01 QQ=10: 25.5;26.0;-;31.0;51.5;off
2023-02-14 14:54:17.274 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:54:26.781 [update notice] received unknown MS cmd: 1008b5110100 / 089e010e0008000003
2023-02-14 14:54:27.051 [update notice] received read bai Status01 QQ=10: 25.5;26.0;-;31.0;51.5;off
2023-02-14 14:54:27.326 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:54:36.750 [update notice] received unknown MS cmd: 1008b5110100 / 089e010e0008000003
2023-02-14 14:54:37.018 [update notice] received read bai Status01 QQ=10: 25.5;26.0;-;31.0;51.5;off
2023-02-14 14:54:37.274 [update notice] received read bai Status02 QQ=10: auto;60;75.0;70;65.0
2023-02-14 14:54:37.545 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:54:46.757 [update notice] received unknown MS cmd: 1008b5110100 / 089e010e0008000003
2023-02-14 14:54:47.026 [update notice] received read bai Status01 QQ=10: 25.5;26.0;-;31.0;51.5;off
2023-02-14 14:54:47.301 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:54:54.815 [update notice] received read bai currenterror QQ=10: -;-;-;-;-
2023-02-14 14:54:55.588 [update notice] received unknown MS cmd: 1008b503020002 / 0affffffffffffffffffff
2023-02-14 14:54:55.868 [update notice] received unknown MS cmd: 1008b503020003 / 0a0800ffffffffffffffff
2023-02-14 14:54:56.144 [update notice] received unknown MS cmd: 1008b503020004 / 0affffffffffffffffffff
2023-02-14 14:54:56.758 [update notice] received unknown MS cmd: 1008b5110100 / 089e010e0008000003
2023-02-14 14:54:57.026 [update notice] received read bai Status01 QQ=10: 25.5;26.0;-;31.0;51.5;off
2023-02-14 14:54:57.301 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:55:06.813 [update notice] received unknown MS cmd: 1008b5110100 / 089e010e0008000003
2023-02-14 14:55:07.081 [update notice] received read bai Status01 QQ=10: 25.5;26.0;-;31.0;51.5;off
2023-02-14 14:55:07.341 [update notice] received read bai Status02 QQ=10: auto;60;75.0;70;65.0
2023-02-14 14:55:07.613 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:55:09.152 [update notice] sent read bai SerialNumber QQ=31: 30 30 30 30 30 30 32 37
2023-02-14 14:55:14.340 [main notice] update check: OK, device firmware 1[8419] available
2023-02-14 14:55:16.804 [update notice] received unknown MS cmd: 1008b5110100 / 08a0010e0008000003
2023-02-14 14:55:17.073 [update notice] received read bai Status01 QQ=10: 26.0;26.0;-;31.0;51.5;off
2023-02-14 14:55:17.388 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:55:26.771 [update notice] received unknown MS cmd: 1008b5110100 / 08a0010e0008000003
2023-02-14 14:55:27.044 [update notice] received read bai Status01 QQ=10: 26.0;26.0;-;31.0;51.5;off
2023-02-14 14:55:27.447 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:55:36.738 [update notice] received unknown MS cmd: 1008b5110100 / 08a0010e0008000003
2023-02-14 14:55:37.011 [update notice] received read bai Status01 QQ=10: 26.0;26.0;-;31.0;51.5;off
2023-02-14 14:55:37.267 [update notice] received read bai Status02 QQ=10: auto;60;75.0;70;65.0
2023-02-14 14:55:37.539 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:55:46.751 [update notice] received unknown MS cmd: 1008b5110100 / 08a0010e0008000003
2023-02-14 14:55:47.024 [update notice] received read bai Status01 QQ=10: 26.0;26.0;-;31.0;51.5;off
2023-02-14 14:55:47.555 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:55:54.788 [update notice] received read bai currenterror QQ=10: -;-;-;-;-
2023-02-14 14:55:55.068 [update notice] received unknown MS cmd: 1008b503020002 / 0affffffffffffffffffff
2023-02-14 14:55:55.348 [update notice] received unknown MS cmd: 1008b503020003 / 0a0800ffffffffffffffff
2023-02-14 14:55:55.629 [update notice] received unknown MS cmd: 1008b503020004 / 0affffffffffffffffffff
2023-02-14 14:55:56.842 [update notice] received unknown MS cmd: 1008b5110100 / 08a0010e0008000003
2023-02-14 14:55:57.115 [update notice] received read bai Status01 QQ=10: 26.0;26.0;-;31.0;51.5;off
2023-02-14 14:55:57.607 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:56:00.921 [update notice] sent read bai BoilerType QQ=31: 2
2023-02-14 14:56:06.803 [update notice] received unknown MS cmd: 1008b5110100 / 08a0010e0008000003
2023-02-14 14:56:07.072 [update notice] received read bai Status01 QQ=10: 26.0;26.0;-;31.0;51.5;off
2023-02-14 14:56:07.332 [update notice] received read bai Status02 QQ=10: auto;60;75.0;70;65.0
2023-02-14 14:56:07.647 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:56:16.772 [update notice] received unknown MS cmd: 1008b5110100 / 08a0010e0008000003
2023-02-14 14:56:17.044 [update notice] received read bai Status01 QQ=10: 26.0;26.0;-;31.0;51.5;off
2023-02-14 14:56:17.664 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:56:26.752 [update notice] received unknown MS cmd: 1008b5110100 / 08a0010e0008000003
2023-02-14 14:56:27.025 [update notice] received read bai Status01 QQ=10: 26.0;26.0;-;31.0;51.5;off
2023-02-14 14:56:27.729 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:56:31.722 [update notice] sent read bai DateTime QQ=31: nosignal;-:-:-;-.-.-;-
2023-02-14 14:56:36.832 [update notice] received unknown MS cmd: 1008b5110100 / 08a0010e0008000003
2023-02-14 14:56:37.101 [update notice] received read bai Status01 QQ=10: 26.0;26.0;-;31.0;51.5;off
2023-02-14 14:56:37.357 [update notice] received read bai Status02 QQ=10: auto;60;75.0;70;65.0
2023-02-14 14:56:37.761 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:56:46.756 [update notice] received unknown MS cmd: 1008b5110100 / 08a0010e0008000003
2023-02-14 14:56:47.025 [update notice] received read bai Status01 QQ=10: 26.0;26.0;-;31.0;51.5;off
2023-02-14 14:56:47.817 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:56:50.791 [update notice] sent read bai PumpHours QQ=31: 4877
2023-02-14 14:56:54.829 [update notice] received read bai currenterror QQ=10: -;-;-;-;-
2023-02-14 14:56:55.110 [update notice] received unknown MS cmd: 1008b503020002 / 0affffffffffffffffffff
2023-02-14 14:56:55.391 [update notice] received unknown MS cmd: 1008b503020003 / 0a0800ffffffffffffffff
2023-02-14 14:56:55.671 [update notice] received unknown MS cmd: 1008b503020004 / 0affffffffffffffffffff
2023-02-14 14:56:56.757 [update notice] received unknown MS cmd: 1008b5110100 / 08a0010e0008000003
2023-02-14 14:56:57.025 [update notice] received read bai Status01 QQ=10: 26.0;26.0;-;31.0;51.5;off
2023-02-14 14:56:57.817 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:57:06.813 [update notice] received unknown MS cmd: 1008b5110100 / 08a0010e0008000003
2023-02-14 14:57:07.081 [update notice] received read bai Status01 QQ=10: 26.0;26.0;-;31.0;51.5;off
2023-02-14 14:57:07.341 [update notice] received read bai Status02 QQ=10: auto;60;75.0;70;65.0
2023-02-14 14:57:07.874 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:57:16.780 [update notice] received unknown MS cmd: 1008b5110100 / 08a0010e0008000003
2023-02-14 14:57:17.050 [update notice] received read bai Status01 QQ=10: 26.0;26.5;-;31.0;51.5;off
2023-02-14 14:57:17.885 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:57:26.793 [update notice] received unknown MS cmd: 1008b5110100 / 08a0010e0008000003
2023-02-14 14:57:27.061 [update notice] received read bai Status01 QQ=10: 26.0;26.5;-;31.0;51.5;off
2023-02-14 14:57:27.854 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:57:36.849 [update notice] received unknown MS cmd: 1008b5110100 / 08a0010e0008000003
2023-02-14 14:57:37.121 [update notice] received read bai Status01 QQ=10: 26.0;26.5;-;31.0;51.5;off
2023-02-14 14:57:37.377 [update notice] received read bai Status02 QQ=10: auto;60;75.0;70;65.0
2023-02-14 14:57:37.910 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:57:46.821 [update notice] received unknown MS cmd: 1008b5110100 / 08a0010e0008000003
2023-02-14 14:57:47.090 [update notice] received read bai Status01 QQ=10: 26.0;26.5;-;31.0;51.5;off
2023-02-14 14:57:47.882 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:57:54.819 [update notice] received read bai currenterror QQ=10: -;-;-;-;-
2023-02-14 14:57:55.099 [update notice] received unknown MS cmd: 1008b503020002 / 0affffffffffffffffffff
2023-02-14 14:57:55.379 [update notice] received unknown MS cmd: 1008b503020003 / 0a0800ffffffffffffffff
2023-02-14 14:57:55.660 [update notice] received unknown MS cmd: 1008b503020004 / 0affffffffffffffffffff
2023-02-14 14:57:56.746 [update notice] received unknown MS cmd: 1008b5110100 / 08a0010e0008000003
2023-02-14 14:57:57.018 [update notice] received read bai Status01 QQ=10: 26.0;26.5;-;31.0;51.5;off
2023-02-14 14:57:57.938 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:58:06.845 [update notice] received unknown MS cmd: 1008b5110100 / 08a0010e0008000003
2023-02-14 14:58:07.118 [update notice] received read bai Status01 QQ=10: 26.0;26.5;-;31.0;51.5;off
2023-02-14 14:58:07.375 [update notice] received read bai Status02 QQ=10: auto;60;75.0;70;65.0
2023-02-14 14:58:07.995 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:58:16.819 [update notice] received unknown MS cmd: 1008b5110100 / 08a0010e0008000003
2023-02-14 14:58:17.091 [update notice] received read bai Status01 QQ=10: 26.0;26.5;-;31.0;51.5;off
2023-02-14 14:58:18.011 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:58:26.831 [update notice] received unknown MS cmd: 1008b5110100 / 08a0010e0008000003
2023-02-14 14:58:27.103 [update notice] received read bai Status01 QQ=10: 26.0;26.5;-;31.0;51.5;off
2023-02-14 14:58:28.023 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0
2023-02-14 14:58:36.844 [update notice] received unknown MS cmd: 1008b5110100 / 08a0010e0008000003
2023-02-14 14:58:37.112 [update notice] received read bai Status01 QQ=10: 26.0;26.5;-;31.0;51.5;off
2023-02-14 14:58:37.372 [update notice] received read bai Status02 QQ=10: auto;60;75.0;70;65.0
2023-02-14 14:58:38.080 [update notice] received update-write bai SetMode QQ=10: auto;26.0;-;-;0;0;1;0;0;0

dk8pn · February 16, 2023, 3:08pm

The OH binding has an integrated ebusd driver but the ebus daemon (ebusd) itself is not integrated.

Under Win 10 i run it within a Docker Desktop for Windows if i need it to identify specific ebus codes. For “production” i operate an ESERA LAN ebus coupler.

ComJack85 · February 24, 2023, 1:04pm

Hey has someone maybe already created the config files for the following devices?

"MF=Vaillant;ID=BAI00;SW=0205;HW=9602", loaded "vaillant/bai.0010015600.inc" ([PROD='0010015601']), "vaillant/08.bai.csv"

 "MF=Vaillant;ID=SCC00;SW=0500;HW=3903"

csowada · March 20, 2023, 9:35pm

Just as information, I’m still alive and I’m working on a new release for openHAB 4.0

csowada · March 26, 2023, 5:48pm

So, the new release is ready und should fix some smaller issues. The code base is update to support openHAB 3.4 and 4.0 . Please remember that the KAR-files are sometimes heavily cached. It may therefore take a few server restarts to run properly.

You should see following message in your log for the new release.
Use eBUS binding 3.4.16 [eBUS core: 1.1.11, eBUS configuration: 1.1.8]

See first post for the links.

dk8pn · March 26, 2023, 6:40pm

Great work, fixing my special code issue. Many thanks for this.

dk8pn · March 31, 2023, 6:24am

Some feedback for the developer of this grandiose binding. Use an openHAB floor plan together with the ebus binding in order to visualize what happens in my Vaillant VML 105/6 heatpump outdoor unit:

Wolfgang_S · March 31, 2023, 6:51am

Is there any way to make such a like floor plan available via the marketplace ?

dk8pn · March 31, 2023, 7:35am

I don’t know how this works using the marketplace. But it is not that complicated and i could support it here. If the heatpump matches to my model, the way could be:

A custom_config.json file is required. I could provide this but it will work only if the heatpump is compatible.
The things and item names based on this custom config file would of course have to be setup
I could provide the floor plan background picture for the page (.png format). It needs to stored in the folder C:\openHAB\conf\html (i am a Windows10 user).
In the page setup it is referenced like this (relative path): /static/VML105_6_out.png

image741×768 21.1 KB
The values are implemented onto the background picture (floor plan) through “markers”. Marker outfit and marker coordinates need to be defined. Could provide this through the YAML code of the page.
The item names of the YAML would need to be adapted to the earlier generated items.

Please let me know if this kind of support is interesting for you.

Veitk · March 31, 2023, 8:14am

Hi Willi (@dk8pn),

that looks amazing. I did not have time to play around since your last json update but would still be curious to see your latest custom json version for checking how much is working with my Vaillant VWL 85/3.

BTW, how did you exactly identify all the correct telegrams for the desired values? Via unresolved telegrams, or directly via ebusd, ouside OH? Seems to be a lot of digging

Cheers, Veit

csowada · March 31, 2023, 9:24am

Could you please start a new topic. Its easier for others to follow the cool topic.

dk8pn · March 31, 2023, 12:54pm

That’s a good idea. Thanks for this hint. Have opened a separate topic here: Configurations for the eBUS-binding [3.4.0, 4.0.0]

doktorpi · July 3, 2023, 2:09pm

No one any idea what’s wrong?
Please advise!

Thanks,
doktorpi

andi_x · July 6, 2023, 6:42am

Hi,
i have troubles to remove my test entries “Configuration URL1” und “Configuration URL2” in the binding via the UI (/settings/addons/ebus/config)
Any Ideas or maybe a workaround to find that in the config files to do it manualy?

Thank you
Andi

dk8pn · July 6, 2023, 12:42pm

Hi Andi,
you will find the configuration file settings here: C:\openHAB\userdata\config\binding\ebus.config
Please regard that i am a Windows10 user.

Regards,
Willi

dk8pn · July 6, 2023, 12:51pm

The ebusd configuration is not necessarily the same as the configuration contained within the openhab binding. I guess that you will need a custom config file for the “brennerstarts”. But you can retrieve the ebus telegram code using ebusd in order to setup this file.

andi_x · July 6, 2023, 6:50pm

Yes! That helped a lot.
I’m using a Debian Linux / Raspberry, the location for the config file is /var/lib/openhab/config/binding.

FROeHlyEisvogel · July 12, 2023, 5:53am

Hey guys, sorry for interrupting your discussion but I have problems to setup the binding with the eBUS adapter 5.
I am not sure if anyone tried this before because the version is new but there should be no huge difference to the adapter 3.

I have desribed my setup in this topic:
Configurations for the eBUS-binding [3.4.0, 4.0.0]

Now I get a lot of telegram errors but no received or failed telegram in the binding channels:

Following versions of eBUS are installed:

DiegoDf · July 29, 2023, 11:15am

Small question. How do you add a ConfigurationUrl to the binding?

In the Openhab 3.4.4 UI, when I click on Settings, then Bindings, then Ebus, there is no configuration option visible.

Apparently it should be possible to add a file /var/lib/openhab/config/binding/ebus.config (on a Raspberry pi), but what is the syntax?