Hello, I am new to OpenHAB. I have a new KNX installation at home that I configured myself in ETS6. I am connecting to my installation through a Theben IPsecure-Router. I understand that this feature is experimental and, by reading the posts I found about it, that not a lot owns a secure router. …

localSourceAddr: 1.1.0 set to something that doesn’t exist in hour topology portNumber: 3671 not needed But overall i was under the impression that secure router was not finished

Result is the same with 0.0.0 for example

Please be aware that localSourceAddr must not (i.e. it’s not allowed) be set to any existing individual address of a device. localSourceAddr is NOT the individual address of the interface nor is it an individual address of the pool (5 tunnels), it has to be an completely unused address (but of cour…

Just had a look again apparently the issue is still open https://github.com/openhab/openhab-addons/issues/8872 But anyway the use of Knx secure and openhab kind of defeats the purpose here because what are you trying to protect ? Do you have very sensitive data running on your bus ? Openhab is not s…

Thank you for the information, I changed it back to 0.0.0. But as mentioned in my previous comment behavior is still exactly the same.

Thank you for your time and answer. I understand from the ticket you mentioned that everything is ok except data secure.

Yes secure part read and write is not working yet from what I can read he just implemented the connection maybe openhab 4 will have it. For now if you are not doing anything comercial just disable the secure part.

localIp is the IP-Address of the openHAB System, NOT the Router IP.

Thank you, I adapted it but the result is still the same.

Hi guys, I disabled secure Tunneling in ETS and tried to configure it in router mode. I had a similar issue. Messages were a bit more explicit I tried then to configure it in tunnel mode. Thanks to your information I could get it working. I reenabled then secure mode in ETS and tried secure tunne…

IPSecure-Router KNX binding ONLINE until I enable another thing

Add-ons Bindings

holgerf (Holger Friedrich) December 17, 2025, 5:35am 13

Hi Klaus, I did not see this post, so let’s continue in the second one you opened yesterday.