New challenge: integration of Lidl remote (HG06323)
Software:
- openHABian/Linux 10 (buster): openHAB 3.2.0-SNAPSHOT - Build #2613
- ZigBee Binding - downgraded to [OH2] Can't set color on bulbs from certain manufacturers - #41 by chris
Hardware:
- Raspberry Pi B 4GB
- Lidl remote (Lidl FB20-002 control via MQTT | Zigbee2MQTT)
Progress so far:
Remote joined the network as DIMMER_SWITCH:
Network Addr IEEE Address Logical Type State EP Profile Device Type Manufacturer Model
0 0000 XXXXXXXXXXXXC7B4 COORDINATOR ONLINE
2460 099C XXXXXXXXXXXX424A ROUTER UNKNOWN 1 ZIGBEE_HOME_AUTOMATION EXTENDED_COLOR_LIGHT _TZ3000_dbou1ap4 TS0505A
242 ZIGBEE_GREEN_POWER 0061
24445 5F7D XXXXXXXXXXXX3AD4 ROUTER UNKNOWN 1 ZIGBEE_HOME_AUTOMATION EXTENDED_COLOR_LIGHT _TZ3000_dbou1ap4 TS0505A
242 ZIGBEE_GREEN_POWER 0061
29110 71B6 XXXXXXXXXXXX5CDF END_DEVICE ONLINE 1 ZIGBEE_HOME_AUTOMATION DIMMER_SWITCH _TYZB01_bngwdjsr TS1001
Fingerprint:
|>| Node Descriptor
| |> Logical Type END_DEVICE
| |> MAC Capabilities [REDUCED_FUNCTION_DEVICE]
| |> Stack Compliance 22
| |> Server Capabilities []
| |> Buffer Size 82
| |> Incoming Transfer Size 82
| |> Outgoing Transfer Size 82
|
|>| Power Descriptor
| |> Available Power Sources [MAINS]
| |> Current Power Source MAINS
| |> Current Power Mode RECEIVER_ON_IDLE
| |> Power Level FULL
|
|>| ZDO
| |> ManagementBindRequest SUCCESS
| |> IeeeAddressRequest SUCCESS
| |> ManagementLqiRequest SUCCESS
| |> ManagementRoutingRequest SUCCESS
|
|>| Basic Information
| |> Generic Device Class
| |> Generic Device Type
| |> Manufacturer Name _TYZB01_bngwdjsr
| |> Model Indentifier TS1001
| |> Product Code
| |> Product URL
| |> Date Code
| |> Application Version 81
| |> Software Build ID
| |> Hardware Version 1
| |> Zcl Version 3
| |> Stack Version 0
| |
| |>| Endpoint 1
| | |> Profile 0104 ZIGBEE_HOME_AUTOMATION
| | |> Device Type 0104 DIMMER_SWITCH
| | |> Device Version 1
| | |
| | |>| Input Clusters
| | | |
| | | |>| Cluster 0000 Basic
| | | | |> Type Server [Input]
| | | | |> Manufacturer Spec. No
| | | | |
| | | | |>| Commands Generated
| | | | | |> FAILURE
| | | | |
| | | | |>| Commands Received
| | | | |> FAILURE
| | | | |
| | | | |>| Attributes Supported
| | | | | |> 0000 ZCL Version
| | | | | |> 0001 Application Version
| | | | | |> 0002 Stack Version
| | | | | |> 0003 HW Version
| | | | | |> 0004 Manufacturer Name
| | | | | |> 0005 Model Identifier
| | | | | |> 0006 Date Code
| | | | | |> 0007 Power Source
| | | | | |> FFDE Unknown
| | | | | |> FFFD Unknown
| | | | | |> FFFE Unknown
| | | |
| | | |>| Cluster 0001 Power Configuration
| | | | |> Type Server [Input]
| | | | |> Manufacturer Spec. No
| | | | |> Unsupported locally
| | | |
| | | |>| Cluster 0003 Identify
| | | | |> Type Server [Input]
| | | | |> Manufacturer Spec. No
| | | | |> Unsupported locally
| | | |
| | | |>| Cluster 0004 Groups
| | | | |> Type Server [Input]
| | | | |> Manufacturer Spec. No
| | | | |> Unsupported locally
| | | |
| | | |>| Cluster 1000
| | | | |> Type Server [Input]
| | | | |> Manufacturer Spec. No
| | | | |> Unsupported locally
| | |
| | |>| Output Clusters
| | | |
| | | |>| Cluster 0003 Identify
| | | | |> Type Client [Output]
| | | | |> Manufacturer Spec. No
| | | | |> Unsupported locally
| | | |
| | | |>| Cluster 0004 Groups
| | | | |> Type Client [Output]
| | | | |> Manufacturer Spec. No
| | | | |> Unsupported locally
| | | |
| | | |>| Cluster 0005 Scenes
| | | | |> Type Client [Output]
| | | | |> Manufacturer Spec. No
| | | | |> Unsupported locally
| | | |
| | | |>| Cluster 0006 On/Off
| | | | |> Type Client [Output]
| | | | |> Manufacturer Spec. No
| | | | |
| | | | |>| Commands Generated
| | | | | |> FAILURE
| | | | |
| | | | |>| Commands Received
| | | | |> FAILURE
| | | | |
| | | | |>| Attributes Supported
| | | | | |> FFFD Unknown
| | | |
| | | |>| Cluster 0008 Level Control
| | | | |> Type Client [Output]
| | | | |> Manufacturer Spec. No
| | | | |
| | | | |>| Commands Generated
| | | | | |> FAILURE
| | | | |
| | | | |>| Commands Received
| | | | |> FAILURE
| | | | |
| | | | |>| Attributes Supported
| | | | | |> FFFD Unknown
| | | |
| | | |>| Cluster 000A Time
| | | | |> Type Client [Output]
| | | | |> Manufacturer Spec. No
| | | | |> Unsupported locally
| | | |
| | | |>| Cluster 0019 Ota Upgrade
| | | | |> Type Client [Output]
| | | | |> Manufacturer Spec. No
| | | | |
| | | | |>| Commands Generated
| | | | | |> FAILURE
| | | | |
| | | | |>| Commands Received
| | | | |> FAILURE
| | | | |
| | | | |>| Attributes Supported
| | | | | |> 0000 Upgrade Server ID
| | | | | |> 0001 File Offset
| | | | | |> 0006 Image Upgrade Status
| | | | | |> FFFD Unknown
| | | |
| | | |>| Cluster 1000
| | | | |> Type Client [Output]
| | | | |> Manufacturer Spec. No
| | | | |> Unsupported locally
Channels:
UI:
ZigBee debug logs (button 1, 2, 3, 4 (from top → bottom) pressed):
- lremote2.txt (27.3 KB)
- lremote3.txt (22.2 KB)
Problem:
No corresponding events in event.log.
@chris
Is there any chance to get this remote working with the ZigBee Binding?