i was looking to install the MiHome Binding (https://www.openhab.org/v2.2/addons/bindings/mihome/) to connect up the new Aqara Hub, unfortunately it seems that with the new branding and upgrade of the Hub (i guess itâs v3) the necessary configuration for this binding is no longer possible.Here are my findings so far:
Initial step:
Hold button on Aqara Hub for 10 seconds until it flashes yellow
MiHome Android App:
Has the option to add the Aqara Hub or the MiHome hub, unfortunately when Aqara Hub is selected it searches but never finds it. The region can be set to Mainland China but this makes no difference.
Aqara Home Android App:
Has the option to add the Aqara Hub only, the app appears to connect to the Aqara Hub and passes it provided WiFi details (Aqara_Hub-CBDF is seen on the Router). The Aqara Hub reacts in Chinese following the WiFi connection and goes from blinking yellow, to blinking blue and then to dark (i guess itâs a connection confirmation). Unfortunately the Aqara App fails to make any follow up connection to the Hub and continues âConnectingâ until after about 80 seconds the following error appears:
âError 601, accessory not found in the back-end server.â
i would guess that this actually means âYour local server doesnât support this deviceâ. Unfortunately the Aqara Home app doesnât have any visible option to change the locale/region!
My questions are:
Has anyone had any experience with the new Aqara Home/Aqara Hub and OpenHab? Are there any possible bindings?
Does anyone know how to change the region in the Aqara Home app?
Does anyone know how to obtain a developer key from Aqara Home once the Hub is successfully connected?
My research so far has led me to believe the Aqara Home App is receiving an update in early 2019 to âallow third party application connectionsâ, this is 2nd hand information though, if anyone can provide anything more solid then it would be much appreciated. With enough information Iâll set about creating a new v2 binding for the Aqara Home enviroment.
Thanks for the link, thatâs where i pulled my info.
Iâve done some further research and have concluded the following:
Version 1.4.4 of the Aqara Home app auto-selects the server, if youâre in Europe, US or anywhere else that means your out of luck because only the China server supports updating the new Aqara Hub!
Luckily i found a solution!
If you want to use the Aqara Home app with your Aqara Hub and products outside China youâll need to go back to version 1.4.1 by downloading the relevant APK from here (of course only applies to Android users):
With the older version you can upgrade the Aqara Hub to the newest firmware (currently 1.4.7), following this you can then upgrade the Aqara Home app to the latest version while keeping the connection to the Hub. Youâll also be able to use MiHome to control the Aqara HubâŠresult!
With the actual base setup now working Iâll see if i can find a way to get into this cheap little Chinese beastie externally with a Binding. Iâm hesitant though, the devâs for Aqara obviously havenât thought this product through and are regressing rather than improving, Iâll only be drumming up new business for them and that seems a shame if they canât sort their â3rd party connectorâ side out properly.
i mean i didnât see the original post so i didnât get the information first handâŠI might be a little wary of information on the internet
Which ZigBee controller might you suggest? Will any old zigbee dongle plugged into an OpenHabian box handle a connection to the switches and temp sensors i have from Aqara (if itâs Zigbee 3 standard)? It seems thereâs only a very small âtested listâ and so no guarantee that itâll work.
You should choose China server to connect the hub,once the fireware version of the hub is update to 1.5.7,you can add the hub to the USA Server, good luck my friend!