No. You are currently on the Snapshot (#693) version
To switch from Snapshot versions to the testing versions (Beta, Release Candidate) you need to use another apt package repository.
Follow these instructions to go from Snapshot to RC1 (they also apply to your case):
(before, you need to switch repositories by modifying /etc/apt/sources.list.d/openhab2.list and using the testing repo):
you could stay on the snapshot apt repository and perform an upgrade to get the latest snapshot
Make sure that you have switched to the new bintray snapshot repo (don’t use the older snapshot apt repository at cloudbees)
I am also stuck on b5 somehow. My /etc/apt/sources.list.d/openhab2.list contains the right path but during the apt-get update it seems to be ignored and does not show the full path with */openhab/apt-repo2:
Make sure that your /etc/apt/sources.list.d/openhab2.list file contains only 1 line: deb http://dl.bintray.com/openhab/apt-repo2 testing main
Make sure that you have added the openHAB 2 Bintray repository key: wget -qO - 'https://bintray.com/user/downloadSubjectPublicKey?username=openhab' | sudo apt-key add -
apt-get clean, then apt-get update and then apt-get upgrade
.b5 will have online and offline variants, but these have been since merged into one for RC1 and up and no new version of offline/online exists.
To upgrade, you should only need apt-get install openhab2 which will remove the old version automatically. From then on, upgrade will work as you intend.
Thank you, I mistakenly copied the unstable repo. But now openhab won’t start anymore. It doesn’t even get to the point of creating logs, so I’m not sure where to start troubleshooting.
Many thank Kai, I would like to help you for documentation but i’m new of this project and i must understand many things before to write about open hub. (Now I need documentation )
I just loaded OpenHab2 RC1 on my Raspberry and got everything working for a couple of minutes. However after like 30min OpenHab somehow AUTOMATICALLY started uninstalling all GUI’s (even the default ones) and bindings I installed with PaperUI a couple of minutes before. Any known reason for this “self destruct” behavior?
I extracted the TAR.GZ file with RC1 on my Raspberry and copied the complete /conf/ folder from my productive installation (2.0 SNAPSHOT) to the RC1 folder, overwriting the default /conf/ folder.
Last log entries:
2017-01-23 00:32:00.268 [INFO ] [.eclipse.smarthome.model.script.FILE] - Outlet02_Alias OFF fired START
2017-01-23 00:32:00.287 [INFO ] [.eclipse.smarthome.model.script.FILE] - Outlet02_Alias OFF fired END
2017-01-23 00:32:00.296 [INFO ] [.eclipse.smarthome.model.script.FILE] - Outlet02_Alias ON fired END
2017-01-23 00:32:00.442 [INFO ] [g.discovery.internal.PersistentInbox] - Added new thing 'max:thermostat:LEQ0127205:MEQ1318475' to inbox.
2017-01-23 00:32:00.449 [INFO ] [g.discovery.internal.PersistentInbox] - Added new thing 'max:thermostat:LEQ0127205:MEQ1358009' to inbox.
2017-01-23 00:32:00.455 [INFO ] [g.discovery.internal.PersistentInbox] - Added new thing 'max:thermostat:LEQ0127205:MEQ1358011' to inbox.
2017-01-23 00:32:00.462 [INFO ] [g.discovery.internal.PersistentInbox] - Added new thing 'max:thermostat:LEQ0127205:MEQ1320673' to inbox.
2017-01-23 00:32:00.469 [INFO ] [g.discovery.internal.PersistentInbox] - Added new thing 'max:thermostat:LEQ0127205:MEQ1317552' to inbox.
2017-01-23 00:32:00.477 [INFO ] [g.discovery.internal.PersistentInbox] - Added new thing 'max:thermostat:LEQ0127205:MEQ1357437' to inbox.
2017-01-23 00:32:00.485 [INFO ] [g.discovery.internal.PersistentInbox] - Added new thing 'max:shuttercontact:LEQ0127205:KEQ0660128' to inbox.
2017-01-23 00:32:00.493 [INFO ] [g.discovery.internal.PersistentInbox] - Added new thing 'max:shuttercontact:LEQ0127205:KEQ0663214' to inbox.
2017-01-23 00:32:02.073 [WARN ] [.thing.internal.GenericThingProvider] - Thing 0210 does not have a bridge so it needs to be defined in full notation like <bindingId>:0210:bulb1
2017-01-23 00:32:02.074 [WARN ] [.thing.internal.GenericThingProvider] - Thing 0210 does not have a bridge so it needs to be defined in full notation like <bindingId>:0210:bulb2
2017-01-23 00:32:02.075 [WARN ] [.thing.internal.GenericThingProvider] - Thing 0210 does not have a bridge so it needs to be defined in full notation like <bindingId>:0210:bulb3
2017-01-23 00:32:04.419 [INFO ] [core.karaf.internal.FeatureInstaller] - Uninstalled 'openhab-binding-network'
2017-01-23 00:32:04.533 [WARN ] [ore.internal.events.OSGiEventManager] - Dispatching event to subscriber 'org.eclipse.smarthome.core.thing.link.ThingLinkManager@94af3b' takes more than 5000ms.
2017-01-23 00:32:13.567 [INFO ] [core.karaf.internal.FeatureInstaller] - Uninstalled 'openhab-persistence-mysql'
2017-01-23 00:32:23.493 [INFO ] [core.karaf.internal.FeatureInstaller] - Uninstalled 'openhab-persistence-jdbc-mysql'
2017-01-23 00:32:30.895 [INFO ] [core.karaf.internal.FeatureInstaller] - Uninstalled 'openhab-binding-yamahareceiver'
2017-01-23 00:32:39.048 [INFO ] [core.karaf.internal.FeatureInstaller] - Uninstalled 'openhab-transformation-xpath'
2017-01-23 00:32:46.469 [INFO ] [arthome.ui.paper.internal.PaperUIApp] - Stopped Paper UI
2017-01-23 00:32:46.586 [INFO ] [core.karaf.internal.FeatureInstaller] - Uninstalled 'openhab-ui-paper'
2017-01-23 00:32:53.795 [INFO ] [core.karaf.internal.FeatureInstaller] - Uninstalled 'openhab-binding-http1'
2017-01-23 00:32:54.030 [INFO ] [b.core.service.AbstractActiveService] - HTTP Refresh Service has been shut down
2017-01-23 00:32:59.488 [INFO ] [basic.internal.servlet.WebAppServlet] - Stopped Basic UI
2017-01-23 00:32:59.606 [INFO ] [core.karaf.internal.FeatureInstaller] - Uninstalled 'openhab-ui-basic'
2017-01-23 00:33:05.940 [INFO ] [core.karaf.internal.FeatureInstaller] - Uninstalled 'openhab-binding-exec'
2017-01-23 00:33:12.944 [INFO ] [core.karaf.internal.FeatureInstaller] - Uninstalled 'openhab-misc-restdocs'
2017-01-23 00:33:20.317 [INFO ] [panel.internal.HABPanelDashboardTile] - Stopped HABPanel
2017-01-23 00:33:20.426 [INFO ] [core.karaf.internal.FeatureInstaller] - Uninstalled 'openhab-ui-habpanel'
2017-01-23 00:33:28.286 [INFO ] [core.karaf.internal.FeatureInstaller] - Uninstalled 'openhab-transformation-map'
2017-01-23 00:33:33.968 [INFO ] [assic.internal.servlet.WebAppServlet] - Stopped Classic UI
2017-01-23 00:33:34.095 [INFO ] [core.karaf.internal.FeatureInstaller] - Uninstalled 'openhab-ui-classic'
2017-01-23 00:33:40.194 [INFO ] [core.karaf.internal.FeatureInstaller] - Uninstalled 'openhab-transformation-xslt'
2017-01-23 00:33:44.740 [INFO ] [core.karaf.internal.FeatureInstaller] - Uninstalled 'openhab-transformation-exec'
2017-01-23 00:33:49.450 [INFO ] [core.karaf.internal.FeatureInstaller] - Uninstalled 'openhab-binding-max'
2017-01-23 00:33:54.908 [INFO ] [core.karaf.internal.FeatureInstaller] - Uninstalled 'openhab-action-mail'
2017-01-23 00:33:59.899 [INFO ] [core.karaf.internal.FeatureInstaller] - Uninstalled 'openhab-binding-astro'
2017-01-23 00:34:05.645 [INFO ] [core.karaf.internal.FeatureInstaller] - Uninstalled 'openhab-transformation-regex'
Are you coming from an older build and have your installed bindings configured in addons.cfg?
Then this will happen … because of massive changes to the runtime in the last few weeks.
So no Basic UI or Classic UI. I also get no config for those UIs when i go into Paper UI.
It doesn’t seem to find any of my things - i had loads via Harmony Hub and Onkyo Amp. I’ve even tried uninstalling and re-installing both add-ons, still no joy.
I’ve also lost my KNX binding and can’t seem to enable it again. I believe its a 1.0 version but compatible with 2.0 and always used to show up in the available bindings. Actually, I’ve noticed that no 1.0 bindings are appearing in the paper UI add-ons config. They are all only labeled 2.0 STABLE.
Here’s my log…
2017-03-01 03:59:35.909 [INFO ] [io.openhabcloud.internal.CloudClient] - Connected to the openHAB Cloud service (UUID = a0b017aa-ceac-46a7-844e-7dd3266fb0c9, base URL = http://localhost:8080)
2017-03-01 03:59:40.721 [INFO ] [el.core.internal.ModelRepositoryImpl] - Loading model 'broadlands.items'
2017-03-01 03:59:44.602 [INFO ] [el.core.internal.ModelRepositoryImpl] - Loading model 'broadlands.sitemap'
2017-03-01 03:59:46.347 [INFO ] [.dashboard.internal.DashboardService] - Started dashboard at /start
2017-03-01 03:59:47.623 [INFO ] [arthome.ui.paper.internal.PaperUIApp] - Started Paper UI at /paperui
2017-03-01 03:59:47.853 [INFO ] [panel.internal.HABPanelDashboardTile] - Started HABPanel at /habpanel
Don’t think i’ve upgraded since november, just wondering if locations of config files have moved or something.