Had big hope that the KEBA Binding problem will solved with 3.3, but it is still the same. All other values are set, but power stays at UNDEF. I activated the DEBUG Level and got for all reports the complete values. So the binding still have a problem, when the item is defined over a file. Setting the same over the UI, works. Debug:
[DEBUG] [internal.handler.KeContactTransceiver] - Sending 'report 1' on the channel '/192.168.***.***:39819'->'/192.168.***.***:7090'
[DEBUG] [internal.handler.KeContactTransceiver] - Received {
"ID": "1",
"Product": "KC-P30-xxxxxxxx-M0R",
"Serial": „xxxxxxxx“,
"Firmware":"P30 v 3.10.36 (211117-093932)",
"COM-module": 1,
"Backend": 0,
"timeQ": 3,
"DIP-Sw1": "0x22",
"DIP-Sw2": "0x00",
"Sec": 6905050
}
from /192.168.***.***:7090 on the transceiver listener port
[DEBUG] [internal.handler.KeContactTransceiver] - Sending 'report 2' on the channel '/192.168.***.***:39819'->'/192.168.***.***:7090'
[DEBUG] [internal.handler.KeContactTransceiver] - Received {
"ID": "2",
"State": 2,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 16000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": „xxxxxxxx“,
"Sec": 6905053
}
from /192.168.***.***:7090 on the transceiver listener port
[DEBUG] [internal.handler.KeContactTransceiver] - Sending 'report 3' on the channel '/192.168.***.***:39819'->'/192.168.***.***:7090'
[DEBUG] [internal.handler.KeContactTransceiver] - Received {
"ID": "3",
"U1": 235,
"U2": 235,
"U3": 231,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 68653,
"E total": 29752553,
"Serial": „xxxxxxxx“,
"Sec": 6905056
}
from /192.168.***.***:7090 on the transceiver listener port
Number:ElectricCurrent keba_p30_x_maxpresetcurrent "Maximaler Versorgungsstrom [%.3f A]" <energy> (gKEBA) ["Status", "Current"] {channel="keba:kecontact:1:maxpresetcurrent"}
Number:Power keba_p30_x_power "Von der Ladestation gelieferte Wirkleistung [%.1f Wh]" <energy> (gKEBA) ["Measurement", "Power"] {channel="keba:kecontact:1:power"}