openhabian@openHABianDevice:~ $ sudo apt update
OK:1 http://raspbian.raspberrypi.org/raspbian buster InRelease
Holen:2 http://davesteele.github.io/comitup/repo comitup InRelease [4.659 B]
OK:3 http://archive.raspberrypi.org/debian buster InRelease
Holen:4 https://deb.nodesource.com/node_12.x buster InRelease [4.584 B]
Holen:5 https://openhab.jfrog.io/artifactory/openhab-linuxpkg stable InRelease [12,8 kB]
Fehl:2 http://davesteele.github.io/comitup/repo comitup InRelease
Die folgenden Signaturen konnten nicht überprüft werden, weil ihr öffentlicher Schlüssel nicht verfügbar ist: NO_PUBKEY 0959C4A3DCF89FBF
Fehl:5 https://openhab.jfrog.io/artifactory/openhab-linuxpkg stable InRelease
Die folgenden Signaturen waren ungültig: EXPKEYSIG 075721F6A224060A openHAB Bintray Repositories <owner@openhab.org>
Es wurden 4.584 B in 3 s geholt (1.316 B/s).
Paketlisten werden gelesen... Fertig
Abhängigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Aktualisierung für 117 Pakete verfügbar. Führen Sie »apt list --upgradable« aus, um sie anzuzeigen.
N: Datei »openhab.liste« in Verzeichnis »/etc/apt/sources.list.d/« wird ignoriert, da sie eine ungültige Dateinamen-Erweiterung hat.
W: Während der Überprüfung der Signatur trat ein Fehler auf. Das Depot wurde nicht aktualisiert und die vorherigen Indexdateien werden verwendet. GPG-Fehler: http://davesteele.github.io/comitup/repo comitup InRelease: Die folgenden Signaturen konnten nicht überprüft werden, weil ihr öffentlicher Schlüssel nicht verfügbar ist: NO_PUBKEY 0959C4A3DCF89FBF
W: Während der Überprüfung der Signatur trat ein Fehler auf. Das Depot wurde nicht aktualisiert und die vorherigen Indexdateien werden verwendet. GPG-Fehler: https://openhab.jfrog.io/artifactory/openhab-linuxpkg stable InRelease: Die folgenden Signaturen waren ungültig: EXPKEYSIG 075721F6A224060A openHAB Bintray Repositories <owner@openhab.org>
W: Fehlschlag beim Holen von http://davesteele.github.io/comitup/repo/dists/comitup/InRelease Die folgenden Signaturen konnten nicht überprüft werden, weil ihr öffentlicher Schlüssel nicht verfügbar ist: NO_PUBKEY 0959C4A3DCF89FBF
W: Fehlschlag beim Holen von https://openhab.jfrog.io/artifactory/openhab-linuxpkg/dists/stable/InRelease Die folgenden Signaturen waren ungültig: EXPKEYSIG 075721F6A224060A openHAB Bintray Repositories <owner@openhab.org>
W: Einige Indexdateien konnten nicht heruntergeladen werden. Sie wurden ignoriert oder alte an ihrer Stelle benutzt.
Openhabian-config was updated first:
openHABian users
The latest version of openHABian will do this for you, just run sudo openhabian-config and update openHABian - each time you open the menu, openHABian will check the key’s expiry date and do this for you
I shy away from the effort of a basic installation. I honestly don’t know what is necessary again until I can start oh-config and import a backup. And I still don’t know whether everything is really in the backup? Bindigs, settings etc.
Read the link I gave. You’ve already put more time into this than doing that would have costed.
Plus, unlike an OS upgrade, it’s reversible/non-destructive.
I have tested this. It is definitely faster.
But…
I got a new DHCP IP address and can no longer log in to the console with my openhabian password.
The browser-based log shows some errors, but I attribute most of them to the wrong IP.
Yes. The system runs with the new IP, which comes from DHCP.
I can ping the host and the website runs on Port 8080
It seems that only a few basic settings are missing.
e.g. a fixed IP address was set before
Now it’s up and running. I went through the second suggestion again: reinstall from scratch
It went faster now.
Changed password of openhabian and changed IP address (yes - I use fixed IPs for my servers and printers)
Mosquitto Broker still had to be installed, but that can be done quickly via oh-config.
Now it runs with bullseye.
Many, many thanks for your support.
Now the next challenge: Update to OH4.
Do you have any best-practice suggestions?
What branch, set where and why do you think it is correct there?
when doing what ?
How am I supposed to know ? Read the docs to find out how to enable debugging (debug=maximum in openhabian.conf) and to provide a logfile of what’s going on, else noone can tell.