The device needs to be added to the ZW DB. There is a blog with directions (the DB is maintained by the OH community and changes are approved by the binding developer at periodic intervals).
Once approved you will generally need to upgrade the binding (devices are contained within the binding). There is no retroactive updating of older bindings (except manually) and in some cases the newer binding will not work with an older version of OH, so you may have to upgrade your system. So with that as background, what version of OH4 are you on?
One thing may make this easier and faster. Look at the MH-s220 in the DB with the firmware version >3.2 (not the one you found) and compare the parameters to your device manual. I suspect they are the same. If so, all that needs to be done is add 2201:7202 to the type line. If that is the case, I can add that for you. If a new device needs to be created, you will need to do that yourself, following the blog instructions. There should be a node9.xml in your userdata/zwave folder.
Hope this helps.