[SOLVED] KNX2 Room controller config

Add-ons Bindings
4

Hi @Dim,
if I can ask … I’ve got one other question to manage a blower fan.
Previously, in KNX1, I was using this:

/* VMC */
Number vmcVitesseVmcPte “Vitesse VMC PTE” (grPM,grVMC) {knx=“5.010:3/0/0+<5.010:3/0/1”}
Number vmcVitesseVmcGde “Vitesse VMC GDE” (grGM,grVMC) {knx=“5.010:3/1/0+<5.010:3/1/1”}

Now within my migration to KNX2, I’ve definedthose Things:

  Thing device ABB_VMC_PM "Blower/Fan Coil Actuator PM" @ "KNX" [ address="1.2.1", fetch=false, pingInterval=600, readInterval=0 ]
  		{
  			Type number : vmcVitessePte 	"Vitesse VMC PTE" 	[ ga="5.010:3/0/0+<5.010:3/0/1" ]
  		}
  Thing device ABB_VMC_GM "Blower/Fan Coil Actuator GM" @ "KNX" [ address="1.1.2", fetch=false, pingInterval=600, readInterval=0 ]
  		{
  			Type number : vmcVitesseGde 	"Vitesse VMC GDE" 	[ ga="5.010:3/1/0+<5.010:3/1/1" ]
  		}

and the following items:

Number vmcVitesseVmcGde “Vitesse VMC GDE” <wind> (grGM,grVMC) {channel=“knx:device:MERTEN:ABB_VMC_GM:vmcVitesseGde”}
Number vmcVitesseVmcPte “Vitesse VMC PTE” <wind> (grPM,grVMC) {channel=“knx:device:MERTEN:ABB_VMC_PM:vmcVitessePte”}

Any ideas on what I’m wrong??
Thank you for your help