Celaeno1
December 10, 2019, 8:22pm
30
Who actually decides what is a critical issue?
For me , for example, it is critical if the “nightly zwave heal” does not work. Or if my Philips Hue dimmer and Tap switches events will not work.
They are still NOT SOLVED since 2.5.0.M1 or 2.5.0.M2.
See here:
Z-Wave heal:
opened 07:18PM - 29 May 19 UTC
S1602
Zwave 2.5.0.201905280446 (not a manual install)
HUSBZB-1
@cdjackson, … as mentioned here... https://github.com/openhab/org.openhab.binding.zwave/pull/1174#issuecomment-496714506, my devices become unresponsive after a daily heal. This seems to have coincided with #1174 . I still see meter and temperature data coming in, but all command Channels stop functioning. I will submit logs to your website.
opened 02:51PM - 05 Jul 19 UTC
Logging this as an issue so we can keep track of it.
For some battery devices… , the heal process never completes. Symptoms are described in the forum post below. Because the heal process never completes, the initialization thread stays around until the system is restarted. The net result is that the device will not be polled until openHAB is restarted. One major downside of this is that the device battery level will not be updated.
Workaround is to disable the nightly heal.
Forum discussion is here.
https://community.openhab.org/t/node-gets-into-weird-state-after-heal/74339/9
Philips Hue (Dimmer and Tap Switches):
Parallel to my “production” setup i got a docker container with the current 2.5 Milestone Build M4.
I found out that lights that i control with the Philips Hue Dimmer Switch via the Milestone Build i got unreliable events from the button.
Here is the events.log port of the M4 Build:
2019-11-01 13:47:00.658 [vent.ChannelTriggeredEvent] - hue:0820:00178827902c:Zigbee_Kueche_Fernbedienung:dimmer_switch_event triggered 1002.0
2019-11-01 13:47:04.833 [vent.ChannelTriggeredEvent] - hue:0820:0017882…
I have a rules file that monitors multiple Hue dimmer switches. It was working fine under 2.4.0. Updating OpenHAB2 to version 2.5.0-M1 seems to break the Hue dimmer_switch_event channel as I can’t see any activity on it. I also didn’t notice anything in the changelog that would suggest any syntax has changed for rules files. Downgrading back to 2.4.0 made the problem go away immediately…
This might not be specific to the Hue. Anyone else seeing something similar?
After upgrading openhab to 2.5.0.M1 this does not always work
While migrating Hue Dimmer Switch and Hue Tap rules from the Hue bridge to OH 2.5.0.M1, I noticed that the binding seems to be missing button events. For instance, many times when short pressing and releasing button 1 of the Dimmer Switch, only the initial pressed (sometimes) or short released (mostly) is triggered, and sometimes neither.
To rule out the bridge itself or interference on the ZigBee mesh network that is causing this, I added a Dimmer Switch Rule (see below) to the bridge that tri…
Do you seriously want to tell people that a stable release somehow works, but you better should disable the nightly zwave heal. And all your Hue Dimmer Switches and expensive Tap Switches will not work? Well then…
In the documentation, it is promoted or proclaimed that this works, actually since 18th January 2019 (Hue) and since mid-May 2019 (Zwave heal) they do no longer work. Then please change the documentation. Thank you very much.
2 Likes
