Yes I think your solution is simple and would work just like my more complicated rule. Thanks for sharing!
When you set the runtime to 0 is more a matter of taste in my opinion. I set it to 0 when the machine is starting so I am able to see how long the last washing was running after the washing is finished. However I agree that this information is pretty useless so it does not really matter
I use it with the Siemens/Bosch HomeConnect Binding.
I did some small modifications today to implement some parameters provided by the HomeConnect Binding for Washer and Dryer.
I replaced the âdummyâ buttons with the âRemainingTimeâ used from the binding.
The following parameters are added to your wonderful widget as well.
Progress (used in a progress)
SpinSpeed
Temperatur
ProgramMode
When the Widget is set in âDryerâ mode, then the colors are changing from blue to red.
I also canât get the expression to work. I am very new to openHab and donât have an idea how to implement the expression for OFF, RUNNING, etc.
I have the rule implemented that you posted above. This is working fine. I have an Item âWaschmaschine_Statusâ which gets values from 0-3.
I have also changed the YAML file as you described it.
But when I write Waschmaschine_Status in the state props field nothing happens.
Can you please give me a hint what I am doing wrong?
Thank you!
sorry guys, but I don´t get where I have to let the widget know what device/item I´m talking about. I can configure the states but still the widget won´t know which item it should watch.
I made an update to the first post: The look and feel of the washing machine will now be the same on android and iOS devices. Thanks goes to @Nico_R who created this custom component for the dishwasher status widget.
I get the following error on the UI when trying to install this widget and the Dishwasher Status :
Installation of add-on 116621 failed
On the Karaf console I get the following:
12/26/2022 20:45:52.656 [ERROR] [mmunity.CommunityUIWidgetAddonHandler] - Widget from marketplace is invalid: Couldn't find the widget in the add-on entry
I installed other widgets from Rich Koshak and Thomas Lauterbach without problems.
Iâm running OpenHAB 3.2 (stable) on a Raspberry Pi 4B with CentOS 8 (64bits).
Maybe my post is in the wrong format!? The post is older than the community marketplace so this might be the case. I donât find a lot of time during the holidays but I will check asap whether this could be the problem.
Could you please try again to install the widget from the marketplace? I just updated the first post so that it matches the required structure. Thank you!
This is my expression for the state and the item washingmachineBosch_state.state is switched via rule between âAusâ, âWaschvorgangâ, âWaschvorgang beendetâ
The screenshot you provided is from the edit mode of the page you added the widget to. It should behave normally once you saved the page and open the page from the normal Main UI view. Did you try that? Does it still look like this?
Alternatively you can switch to run mode in the bottom right corner.