Hello, I would like to try out the Zigbee binding that is under development! Where can I found the repository with the latest work? I have some different TI hardware that I would like to test with it (CC2530, CC2531, CC2538, CC2650). Is there any instruction on how to generate the firmware, as I…

That might explain why I couldn’t see any Zigbee commands in the quick scan I had :wink: .

@chris Is there any Zigbee motion sensor which is supported at present? PS: I know Samsung Smartthings isnt fully baked in.

No - I’ve not added this cluster at the moment. I’ve started to code it and it will be included shortly.

Ok, found the answer here (mainly for my reference). [image] [OBSOLETE] IKEA Tradfri RGB Bulbs (ZigBee with "CIE xy" color scheme) Devices & Integrations Connected Things …

[image] chris: found the answer here sounds promising :slight_smile:

Until Xiaomi zigbee devices will be supported by the Zigbee binding maybe this little zigbee to mqtt bridge will be useful to some people: [image] Xiaomi Zigbee devices to MQTT bridge Home Automation I got Xiaomi zigbee switches working with zigbee-shepherd and…

SOLVED: Needed to restart the binding. Now the switch and dimmer channels are there and working. I leave it here for reference. Sorry for the noise Chris. Hi @chris , there is a new zigbee device I’m playing with: “Bitron Home Dimmer plug”: http://www.bitronvideo.eu/index.php/produkte/smart-home-p…

[image] chris: Ok, found the answer here (mainly for my reference). Let me know when I should test. I also read that all trådfri bulbs with manfacturer number 1721 and above (i have 1719) have a new Firmware that Makes them compatible with the Hue Gateway… so this Could make it worse If they…

I’ve not looked at this in detail yet. I have added some new commands into the library that should allow me to work out if a device supports a specific command or not, and from there the binding can decide which ones to use. I’m not sure of course if the bulb supports this command to find out what c…

@scottk , Thanks for mentioning these cheap bulbs. I tried the Element Classic bulb and it worked fine even with 220V.

Zigbee binding

Add-ons Bindings

AndrewL (Andrew Linden) September 27, 2017, 6:13pm 376

Until Xiaomi zigbee devices will be supported by the Zigbee binding maybe this little zigbee to mqtt bridge will be useful to some people: