lbj23
(King)
February 18, 2020, 12:12pm
1
Hi,
I am new here and need some help.
I order switch module for roller shutter (link below) for my motor Somfy Orea WT.
I would like to connect this module with openhab. Is this possible or which script is working?
https://www.aliexpress.com/item/4000424450915.html?spm=a2g0s.9042311.0.0.72b54c4dS730np
vzorglub
(Vincent Regaud)
February 18, 2020, 1:25pm
2
Tuya modules are normally flashable with Tasmota
But this device is not the the repository (Yet…)
Otherwise there are other ways to control tuya devices:
Hello community,
I spent the last few days searching through the forum to get some Tuya-Bulbs (they usually sell as “Smart life”) working in OH2.
I noticed that it is hard for a beginner to get this done, because all information is spreaded in different threads and postings, so I decided to put it all together in a step-by-step walk through here.
I also found a rather elegant way to get the essential Tuya parameters (Tuya ID and LocalKey) which I also want to share here.
Furthermore, I found…
Cheap Smart Plugs (With power monitoring!)
[image]
The Mission:
Based on this thread about cheap, wifi-based smart plugs, it was suggested I do a write-up on how to flash them and how not to brick them (like I did )
Why:
Smart plugs are probably the first or second thing you’ll want to do with your new smart home. But, there are a number of issues to smooth before you can use them. Once smoothed you’ll see that it’s actuallly a doddle to get these plumbed in to your system.
W…
Or with node-red:
lbj23
(King)
February 18, 2020, 2:00pm
3
Thank you.
Which module with same functions is also ok? I know for Fibaro but is expensive. What about Sonoff? I am searching something for my Somfy Orea and Geiger GJ56 motors.
vzorglub
(Vincent Regaud)
February 18, 2020, 3:26pm
4
I have experimented with motor so I can’t be of any further help here.
system
(system)
Closed
March 31, 2020, 7:29am
5
This topic was automatically closed 41 days after the last reply. New replies are no longer allowed.