@Yiannis550, I plugged in my Aeotec USB stick in my PC and inspected the messages it sees from the WallMote Quad with the Zensys tool. When swiping, it is indeed sending “CONFIGURATION_REPORT” messages:
This is what I see appear when I swipe button 1 up:
08:03:44.582: Received: 042 - COMMAND_CLASS_CONFIGURATION.CONFIGURATION_REPORT, data: 09 04 01 01 7C B5
08:03:44.854: Received: 042 - COMMAND_CLASS_CONFIGURATION.CONFIGURATION_REPORT, data: 0A 04 01 01 9B B6
This is what I see when I swipe button 1 down:
08:03:47.700: Received: 042 - COMMAND_CLASS_CONFIGURATION.CONFIGURATION_REPORT, data: 09 04 01 00 B8 B7
08:03:47.813: Received: 042 - COMMAND_CLASS_CONFIGURATION.CONFIGURATION_REPORT, data: 0A 04 01 00 8C B8
Swipe Button 2 up:
08:04:54.421: Received: 042 - COMMAND_CLASS_CONFIGURATION.CONFIGURATION_REPORT, data: 09 04 02 01 9A BB
08:04:54.531: Received: 042 - COMMAND_CLASS_CONFIGURATION.CONFIGURATION_REPORT, data: 0A 04 02 01 C3 BC
Slide Button 2 down:
08:05:02.616: Received: 042 - COMMAND_CLASS_CONFIGURATION.CONFIGURATION_REPORT, data: 09 04 02 00 B0 BD
08:05:02.859: Received: 042 - COMMAND_CLASS_CONFIGURATION.CONFIGURATION_REPORT, data: 0A 04 02 00 6C BE
I think I recognize this pattern:
09/0A 04 __/__ __/__ xx xx = start slide, stop slide
__/__ 04 01/02 __/__ xx xx = button 1, button 2
__/__ 04 __/__ 01/00 xx xx = direction up, down
(and 042 happens to be the ZWave device ID)
So, the button is sending these ‘slide’ updates through ‘COMMAND_CLASS_CONFIGURATION.CONFIGURATION_REPORT’
In contrary, button presses are send through ‘COMMAND_CLASS_MULTI_CHANNEL.MULTI_CHANNEL_CMD_ENCAP’, as you can see here:
08:02:34.042: Received: 042 - COMMAND_CLASS_MULTI_CHANNEL.MULTI_CHANNEL_CMD_ENCAP, data: 00 01 5B 03 FA 00 01
08:02:35.000: Received: 042 - COMMAND_CLASS_MULTI_CHANNEL.MULTI_CHANNEL_CMD_ENCAP, data: 00 01 5B 03 FB 00 02
08:02:36.886: Received: 042 - COMMAND_CLASS_MULTI_CHANNEL.MULTI_CHANNEL_CMD_ENCAP, data: 00 01 5B 03 FC 00 03
08:02:37.905: Received: 042 - COMMAND_CLASS_MULTI_CHANNEL.MULTI_CHANNEL_CMD_ENCAP, data: 00 01 5B 03 FD 00 04
This is short-pressing button 1, then 2, then 3 then 4.
… and, to make a long story short: it does confirm that the buttons are indeed sending these messages to the controller. Openhab (or the binding) does not see them or does not know how the read these messages…