Setup, Configuration and Use   1.x Compatibility


Topic Replies Activity
MQTT Event bus - state of an AVG or SUM group 10 December 11, 2019
OH 2.4, SMA inverter modbus trouble 9 December 8, 2019
[SOLVED] Use URL to manipulate items in OH2? 15 December 6, 2019
Sonoff control without flashing TasmotA 7 December 4, 2019
Poll: Which OH1.x addons do you use? 96 October 15, 2019
Pilight setup on openhab 2.4 4 September 13, 2019
OH2 vs OH1 - Why one should migrate 32 August 11, 2019
Network UPS 27 July 25, 2019
Force NTP refresh with rule 2 April 29, 2019
PLCBus setup 8 April 25, 2019
openHAB2 piface setup 19 March 24, 2019
Heatit Z-Water 3 March 15, 2019
[SOLVED] Rain amount reported as 0.0 although a non-zero value is returned in weather 1.x binding 3 March 10, 2019
MQTT move from 1x seems impossible 2 March 1, 2019
Error in log for DPT 5.010 1 February 6, 2019
[SOLVED] MQTT 2.4 error when migrating from MQTT1 37 January 26, 2019
Opentherm + ATAG One 4 January 17, 2019
[SOLVED] Feature Installer error Failed installing 'openhab-binding-gpio, openhab-binding-knx1, openhab-binding-mqtt1' 3 January 12, 2019
Insteon updated motion sensor with openhab 1.x 10 December 21, 2018
Where does configuration go? mixed v1 v2 bindings 7 November 18, 2018
Would you migrate from OH1 to OH2; or if you could do it again, would you start fresh on v2 5 November 18, 2018
[SOLVED] Z-Wave Network key 12 October 12, 2018
[SOLVED] Adding location to a 1.x binding - can I define a Thing for an UPS? 5 August 16, 2018
EDMIAX Smart Plug SP-1101W integration 7 July 3, 2018
How to change installation package? 16 May 30, 2018
Alarm Clock from WiKi fails 6 May 17, 2018
BundleConfigReader Error 4 May 15, 2018
Error executing the transformation 'JSONPATH': An error occured while transforming JSON expression 25 May 12, 2018
Help with serial binding 4 May 11, 2018
MystromEcoPower binding in openhab 2.2 -> I got lost 4 February 1, 2018