How to ask a good question / Help Us Help You

Before you ask…

Community forum is NOT a helpdesk

Let’s put this in the front: nobody here works for openHAB. The community members are helping with an Open Source Project, not a commercial software.

Additionally, the forum is NOT dealing with general Home Automation topics, the focus is on openHAB. In some cases, various products or technologies which are not directly linked to openHAB can be discussed but with the proper title, category or tag.

We are ALL volunteering our free time to help others and as much as it pains to say it, not all topics might get a satisfying answer.


:one: Did you search?

Check the Search functionality. There’s a high chance that someone already asked a similar question and the answer is just waiting for you.

It might not work exactly as you need, but most of the common scenarios have already been covered. Yes, you may need to alter the code/configuration a little bit, but that’s just part of the work.

Also keep in mind that when you’re writing a new topic, on the right side (where the Preview panel is) you will see topic suggestions. These are matched by your topic, tags and post content. Check them out before you post.

If you do find a solution to your problem, consider dropping that post a like - it will help also with further searches for other users as well as notify the person that wrote that it helped someone.

:two: So how do I search correctly?

Try to search only for what is the essence of a question - error message (without your use case specific data), binding name, operation you want to perform, data type you’re struggling with.

Some examples of searches for common scenarios:

  • binding problems
  • rule coding
  • sitemap configuration
  • errors in the log file

:three: I found a similar topic but it’s already solved and I still have a problem. Should I post in it?

That is sometimes tough to decide. As a rule of thumb - no.

What you could do, is to post your question in a new topic and put a link to the topic you found (see also Show effort below).

:four: Did you read and search the docs ?

OpenHAB docs are at Introduction | openHAB . There’s at least a couple of pages you should know before asking such as the concepts, New User Tutorial and configuration principles.
Note searching the forum will not yield any results from the docs, but there’s a search function on the docs pages, too.

Writing a good question

:five: Choose a category

Most categories are self explanatory, so you shouldn’t have much trouble in choosing one.

:six: Title

Having a good topic title is essential. It should summarize your issue or question so that without even opening the topic people can have a good, general idea of what is inside.

A good topic generally:

  • Includes unique part of the error you’re getting
  • Contains binding name or action description
  • Describes the thing you’re having an issue with
  • Is emotionless

Some examples:

  • Good How do I use a timer in a rule to delay an action?
  • Bad Timer not working
  • Ugly Problem/Need help
  • Good ZWave - Not able to include device ZXX123
  • Bad ZXX123 not discovered
  • Ugly ZWave problem

If you’re having a problem writing a good topic title, leave it for last - once you’ve written the whole question, it might be easier to write a summary title for it.

:seven: Tags

While we’re with the topic, let’s cover the tags as well as they complement each other.

Tags are added to a topic to help with search, as well as give additional context to people reading your question.

Common tags include zwave, mqtt, HABpanel, rules etc.

The Question

Before posting anything make sure that you read and follow the community guidelines

:eight: Describe your goal

It is vital to give as much detail as needed for people to understand what you’re struggling with and also what are you trying to accomplish. The latter part is crucial to avoid creating a XY problem when asking. That’s very much annoying volunteers.

:nine: Show effort

As stated at the beginning, this is a community forum. If you don’t show any effort from your side, be prepared that your question might be ignored.

This includes:

  • Posting links to similar topics that you’ve found through search - it shows that you already tried to find a solution and also what have you tried before asking, so you won’t get answers/links to things that already didn’t work for your situation.

  • Try to reproduce the problem, i.e. try find out what changes trigger the problem and which ones make it disappear.

  • Describing what you tried - topics that state the problem and straight up ask for a solution are often ignored (“I need to write a rule like this. Please give me a solution.”), because why anyone should give their free time to someone who couldn’t spend a couple minutes showing that they care?

:ten: Describe your environment

What version of openHAB are you using? What snapshot version (if relevant)? Are you using Windows, Linux ? openHABian ? If Linux, is it natively or in Docker or some VM?

Some categories provide you with a template to fill in:

  • Platform information:
    • Hardware: CPUArchitecture/RAM/storage
    • OS: what OS is used and which version
      if openHABian: which branch and version ?
    • Java Runtime Environment: which java platform is used and what version
    • openHAB version:
  • Issue of the topic: please be detailed explaining your issue
  • Please post configurations (if applicable):
    • Items configuration related to the issue
    • Sitemap configuration related to the issue
    • Rules code related to the issue
    • Services configuration related to the issue

:one::one: Describe what you changed and what’s happening now

  • try going back in your mind and logs to determine when your system was still working properly and when you noticed for the first time that your problem happened.
  • explain ALL changes you made between those points in time - not just the last one. Quite often the reason isn’t what you believe it to be.
  • Generate logfiles showing the problem and what happens right before that.
    See Logging | openHAB.
    Post the logs (the relevant part from openhab.log usually) using code fences (see next paragraph).

The more you describe about how it’s setup and what it is doing, the easier it will be to reproduce or drill down what might be causing your problem.

:one::two: Use proper formatting

Especially use code fences for code samples. This thread should give you a quick rundown of how to format your text.
Do not post screenshots of text but provide the text itself so it can be referenced/quoted.
Remember to split text into paragraphs and use white-spacing.

:one::three: Attach examples

Provide rules, config or logs wherever this could help with understanding the issue.
Text is preferred, use screen shots only where appropriate.
New users can’t attach files, but once you’ve searched before posting you probably already unlocked the Basic level and thus shouldn’t hit this limitation.

:one::four: Reread it

Yes, the whole thing - check if topic is descriptive, tags are appropriate and that the question makes sense and actually asks what you want it to ask.

Having good grammar and spelling helps, but since not everyone is a native English speaker (most of us aren’t), at least check if there are some glaring errors. Punctuation and white-space also helps a lot.

:one::five: May I mention users in the post?

Generally - no.

Users you address are notified and that’s annoying most people as it is essentially demanding an answer from them.
That’s at least in the initial post. In followup posts you might be doing that, but that also depends on the person on the other end.

At the very least if you do mention someone in the post using @someusername, be polite. Remember, we’re all volunteers here.

Done. Now what?

Now you wait :slight_smile:

Since there are users from all over the world, answers and questions come basically 24/7, but the actual time when you’ll get one is undetermined.

Noone is responding :frowning:

If the topic has been open for a longer period and noone responded, reread your post and title. Maybe you could improve it (remember that you can always edit your posts).

If you think it’s all good, consider giving it a bump - that is post a reply there to make it visible. Sometimes there’s a lot of traffic on the forums and people that know an answer to your question might’ve just missed it.

Do note that if you overuse it, it might give the opposite effect of showing you as an entitled person and thus drive people away.

I found a solution myself


If you think it will be valuable, post it in your topic and mark it as solved. It might help someone else that will find your post later.

If you don’t feel like sharing, at the very least leave the topic open. Deleting your posts can be seen as bad manners and that you only care about yourself to a point where you don’t even want your question to be in the community forums. At least it can serve as a starting point for a different user to point to it and say “Hey, I have the exact same question and that one doesn’t have a reply - I’ll bump it and ask there.”

I got a reply, but it didn’t solve my problem

This is what can happen a lot. See what the poster mentioned and if it brings you closer to a solution, mention it in your reply. It will make them feel that replying to you was worth their time investment and they will most probably stick with you to solve the issue completely or even involve other people they know to help.

I got a reply and the issue is solved


A few things to note on closing the topic:

  • If someone posted a solution to your question, mark it as such (there’s a checkbox in the bottom of that post for that).

  • If someone’s posts help arrive at the solution, consider dropping them a like. As with everything, don’t spam it, but a little appreciation goes a long way.

Does this even work…?

Try for yourself and find out :slight_smile:

Remember - there is no guarantee that you’ll get an answer, as noone is required to give you one.

All you can do is provide a good, thought through, interesting question. Usually that’s more than enough to get people to help you.

In time you should find it easier to write good questions and hopefully also answer some from other users.

That’s what we’re all here for.

All credit to: How to success Email Alerts in Uipath - Tutorials - UiPath Community Forum
Thanks for @Dim and @rlkoshak and others for the feedback

How to hear the current room temperature via marytts(text to spech) every our
Electrical doorlock
[SOLVED] How to get the hue secret key in OH2?
How to show the average of all values in the same group
Clear the Cache
[OH 2.4.0 M6] Testing Results
Enigma2 sitemap
Audio Google home mini
Reduce Logging in OH3
[OH3] high cpu load, unresponsive OH
OH3 fails to startup
Openhabian topics
Unable to install openhabian with clonebranch=stable successfully
Openhabian Kernel Error Panic and how to transfer from sdcard to usb
New binding suggestion: Wavin AHC 9000 / Jablotron AC-116
Execute openhab-cli clean-cache without interactions
[openhabian] All Things uninitialized after reboot/update
JVM Crash
Double reverse proxy breaks item state connection
openHABian hassle-free openHAB Setup
InfluxDB doesn't work after reboot, problem with rights
How to add adress Bluetooth BlueZ Adapter
OpenHab 2.5.12 for rpi image file
Convert Wh in kWh
"ping" openHab during installation
Could not create rrd4j database file (Read-only file system)
[Z-Wave] Danalock V3 not recognized
Alexa Openhab
OH 3.1.0 InfluxDB stopped working after update to 1.8.7-1
Ask for a solution
openHAB not starting after upgrade 3.0.2 -> 3.1.0
openHAB 3.1 Release discussion
Can't access the site on android using the hostname
Zwave.things manual configuration perameters
Openhab 3 problem
Setting Host Address
Setting up openHAB coming up with error when click seat
Ignoring openhab.lists entries at update
Yale Zwave YRD210 and YRD220 Deadbolt locks not discovering
Error messages after start, reason unknown, system was running for month with no changes no issues
How to get an average Value of an item (OH3)
Sitemap no longer available when not connected to home network (via OH-Cloud)
OH3 and Hyperion.NG not running due to auth error
Container constantly rebooting after 3.0.1 --> 3.0.2 image upgrade
Openhab 3.0 Exec Binding
OH3 MI and Homegear installation
OpenHABian Milestone upgrade fails
HELP , tab exetensions missing
Sitemap configured in /etc/ not showing
[SOLVED] How to identify which widget has no defined item?
[Ecobee binding in OH3] temperature not displayed in Celsius and missing forecast temperature
Sadly, I seem to be going backwards with OpenHab
SD backup
Remotely resetting gpio via openhab
OH3: Windows State String Correct?
Recommendation for Z-Wave gateway?
WD MyCloud EX2
Orvibo Allone Pro
OH 2 rules don't work in OH 3
OH3: could not get device definitions from
Openhabian SD card lifetime
Migrate openhab2.x to openhab 3 - best practice
Startup issues
Reboot on openHab 3
Devolo MT02648 Door/Window Contact not completly working with openHAB 3.0
OH Webinterface not rechable
Homematic RPI-RF-MOD with homegear
Running a python script once a channel is triggered
openHABian Upgrade to openHAB3 failed
Qubino Dimmer in opensmarthome database ZMNHSD1 missing?
Group:Switch ON only if all members are ON
Razberry Zwave & OH3
Syslog Errors (100 GB)
Zwave OH3
Can't setup OH3 on Raspi: no addons / no wifi
Ledvance Smart+ Plug - EU-version with Zigbee unable to pair with Bosch Smart Home
OpenHabian v1.6.3 Frozen Updating OH 3.x to latest SNAPSHOT
ZRAM issues
OH3: OH3 looses communication with Mosquitto
Fail2ban on mqtts protocol
Issue with Z-wave and Openhab
Sorry for the provocative question, but how satisfied are you with Openhab
Securing Openhab with free ssl Let's Encrypt Certificates
Got some issues accessing OH3 on raspi4 over Browser
System Crash
Consumption optimization of the solar power - SG-ready board necessary?
Bootable openhabian Backup (Raspb. + SSD)
openHABian shared or dedicated
Upgrade issues with Samba et al
Known issues on OH3 upgrade
OH: unknown devices
Known issues on OH3 upgrade
Time conversion OH3
[SOLVED] OH3 HOMEKIT BUG?: openhab Bridge only discoverable as accessory and 0 items created for HomeKit?
Openhabian 3, myOpenhab
openHAB 3.0 Release discussion
Yio binding
OH3 how view textual definition of an Item
Slider scaling on OH3
OH3 OpenHabian Influxdb+grafana and NGNIX failing to install
Mqtt transformation issues
Implementation of a multisensor data acquisition system based on openhab
Migration to openhab3 zwave binding
Enocean Issues with Eltako FGW14-USB
Receiving Notifications - is there something I need to configure?
New openHab2 EnOcean binding
Multiple commands to single item
No luminance from RS LED D2 Z-Wave Indoor LED-light with motion sensor
[SOLVED] Astro Binding - Sunrise and Sunset Start Time (UI configuration)
How to install mosquitto
Help, how to turn on light in rule after After a certain hour?
Forum section and documentation suggestion
openHAB 3.0 issues after migrating
Zigbee routers goes offline after 2 days.I am using Xbee s2c co ordinator
openHABian - Mosquitto MQTT failed to start
Thing offline Content is not allowed in prolog
Openhabian 1.6: migrating to OH3 fails
No Ethernet connection , no IP
Unable to parse ip
SOLVED: OH stops after a day with OutOfMemory
I really hate openhab
Linux crashed while updating to 20.04 now I can't boot the system
Is ACL really needed for the openHAB distribution RPi?
How to turn off openhabian or raspberry pi
Max! Thermostat setup
Duplicate rule names
How to get sensor RESULTS messages on the tasmota console
ZRAM install fails
(Paying help) Need help set up zwave devices
Should unattended openhabian install create user?
Two step lightcontrol with motion sensor
Frontail issues on new openHABian install
New house with Only Zwave components xperiencing slowness
FGF-101 v2.1 FW3.4 suddenly offline
What is the best way to control a GPIO pin?
Rules are not loading on new install
Aeotec Multisensor 6 change parameter issue
Control from openhab fails
[WIP] openHAB relationship map
Aeotec Nanomote Quad: How to use?
Faulty Homegear installation over openhabian-config?
Xbee with dht22
How to track by gps
Bindings, Hue and Z-Wave stops after Astro Binding triggerd start event
I need help please, harmony hub activity in habpanel
Can we control the swimming pool management system using openhab2?
Install openHABian and connect to WiFi - Documentation link does not work
OpenHAB 2 is support for multiple Homes or users
How do i add rtsp wyze cam?
How do i set switcher in openhab?
Advise for High Performance HA OpenHAB server hardware
MQTT map "on" or "off" to ON/OFF
Energy Usage Monitoring - Options in NA?
Type problems with a simple expression
Integration of a DHT22 sensor - error in event.log: /usr/bin/env: python3 No such file or directory
Openhabian image
After Update: Raspberry Pi4 eth0 adapter is down
Openhabian 1.5 openhabian high CPU Usage
Announcements being used for discussions / questions etc
Error loading rule list
Reverse proxy certificate not trusted
Whats your average CPU temp when running on a Pi3?
openHABianPi Initial Setup
Lupus temperature sensor shows wrong temperature
Weather Binding won't install using Paper UI
/tmp to NAS
Touch screen interface unusable, thermostat setting keeps jumping all over the place
InfluxDB + Grafana installation
My electric meters return Null as value
Design Pattern: Working with Groups in Rules
ESPHome solution for openHAB
OpenHab, Modbus TCP (Volison ADM-5850G) and Wellpro WP8028ADAM configuration example
12v smart lights
Backup OH2 that has been moved to USB
Cant get KNX Binding to work properly
Alternative sorted... 👍
Response error when Authenticate my New App for your Spotify Use
Name of Calendar
Printing item-values in a Telegram rule
Memory overload on openHAB 2.5.4 - 1
What ports are required to be open?
Rules are not showing
Unknown device: Honeywell 39337 / Jasco 4103
KNX device is OFFLINE
Fatek Plc
System seems to be constantly restarting
Decora switch wiring
Neo Coolcam NAS-DS01Z does not work on OH 2.5
Getting the binary sensors on the Qubino Smart Dimmer (ZMNHDD) to work
Delay Rule loading after Startup in OH2?
Installing Node.js
Sitemap page refresh - stop scrolling to top
High memory usage in OH 2.5.3
Demo setup missing?
Grafana File Location for Backup
OH on Synology getting slower and stopped now
Update fails 2.4 to 2.5.2
[SOLVED] Detect if Homegear crashes?
[SOLVED] OpenHAB not starting anymore after update to 2.5.2 (maven download error)
Openhabian lighttpd settings
Zw100 security system
No automatic refresh of time
Frame widget refresh
I need help with rule, how to write - WHEN item Door_Status changed *after 1 minute to chech* THEN?
ZMNHVD Flush Dimmer 0-10V and IS140-2 PIR sensor with relay with no zwave_neighbours
ZMNHVD Flush Dimmer 0-10V and IS140-2 PIR sensor with relay with no zwave_neighbours
Docker 2.5.0: Any suggestion fo rbest update practice
Invert percentage on zwave item for Alexa
How do is start
Xiaomi Open/ Close sensors will not get visible / working in the paper UI and Visual Studio Code
Is there a way to create "Animations" for devices?
Can't figure out how to run chown
[SOLVED] Error occurred while checking the system module on windows
Broadlink mini binding air conditioning
[SOLVED] Error occurred while checking the system module on windows
Windows sensors questions
General question about hardware setup
My nightmare with ESP8266 and openhab
Bind echo(alexa) devices
[SOLVED] Openhab 2.5 new rules are not working
[SOLVED] How can i control the gpios of a raspberry pi through google assistant
Have Alexa switch to Netflix on LG Web OS TV
Use thing channel as a label
Lots of error-messages after 2.3 Update - No idea what this could be?
HTTP Binding to show Usenet information
[SOLVED] Wol can't wake up my win 10 pc after 10-15 minutes
Heating won’t turn off
The openHAB 2.5.0 Update Process - My Experience
[SOLVED] Hardware replacement
Logrotate dying
OpenHab can make Telegram Phone Calls now! (with TTS Voice)
Wifi configuration Raspi 2b with USB-Wifi-Stick
[SOLVED] Hardware replacement
GE 46203 Unknown device
Create Server Connection
How often do you restart the server running openHAB
Squeez server
[SOLVED] After update from 2.4.0 to 2.5.1 #11 habmin not working
How to Setup MQTT connection between ESP32 and OpenHAB2
Openhab2.5 and ... Alexa-Google-Apple
ZWave Binding failing
Zwave 2.5.x Association Groups
[SOLVED] Rule Sending Command after ZWave Room Thermostate changed SetPoint
How to implement 2-step motion sensor controlled lighting
How to "trigger" an mqtt topic to read another topic
Control over knx to Zwave
With Serial Binding query from sensor
Velbus glass panel button
IpCamera: New IP Camera Binding
FGS-223 with single switch
Openhabian update Java error after update
Nikobus error binding a Push Button
Fgk 10x door sensor battery level reporting
[SOLVED] Miflora mqtt messages not recognized, tasmota did
[BTicino/OpenWebNet] Thermostat HC4695 Setpoint/Target Temperature problems
[SOLVED] One Line in Rule makes system die
Memory rising and dropping?
openHAB crashes due to java library for leapmotion for addon
[Solved] Homematic: Missing Channels for thermostat HmIP-eTRV-2
[SOLVED] Myopenhab not opening
[BTicino/OpenWebNet] New openHAB2 binding ready for testing
Doesnt open webpage
Mysensors and two MQTT gateways
Roller Shutter with SonOff R2 Dual and Tasmota
Karaf Error 501, syslog 13GB in one day
Is Setpoint and valuecolor supported?
Binding Openwebnet how to detect when button is pressed or someone push the ring on videophone front door
Multi zone heating solution
[SOLVED] Unknown device for z water heatit - how to proceed?
[SOLVED] All Things lost from openHab
[SOLVED] Can't connect to LG webos 4.7
Network Binding not finding anything
Warning in log - "rebuilding Selected Selection Key Set Selector"
New Rules
How to: The method I use to backup my PI and C2 based Openhab
Need Help to add Canary Camera Bindings on OpenHab2
Trying to update windows openhab 2.5.0.M1 to M2
Problem with Swith Wall TUYA 3 GANGS
[mapdb] Can´t get mapdb to store items state or restoreOnStartup
Help i've broken it
[SOLVED] Failure: 2019-10-21 15:09:15.138 [ERROR] [io.socket.thread.EventThread ] - Task threw exception
Reusable Sitemap Sections
Help getting FireMotD working again Problems with Sudo .\FireMotD -S
Ambient Binding
Nfc ntag 216
APT Repo Public Key Expiration & Update
Samba share not working
Items configuration in mqtt
Jetty Timeout issues, looking for suggestions on a fresh rebuild
Beginner Hardware decision
Sourround Programm Select with Denon AVR-X2000
[SOLVED] Kostal Pleticore 7 plus solar Inverter binding
CT100 Low Battery Display - Change batteries no change
Slack Integration for OpenHAB 2.4
Huge CPU Load - Zulu8 on Mac OS X - sporadically
What radiator valves to buy
Switch on Tradfri bulb with rule
Squeezebox configuration
First installation of OpenHab2. Can’t get to dashboard - Windows
[SOLVED] How to setup gmail smtp config for personal openHAB cloud instance?
[SOLVED] Underfloor system recommendation (Europe)
OpenWebNet Binding - F454 ERROR IN Java $MODULE$: connection cannot be established
Gpio bindings on openhab2 runing on raspbian buster
What to use instead in rule? - "The method getCalendar() from the type DateTimeType is deprecated"
senseBox Binding Bug
Clear the Cache
Picotts on RPi throws an error
How to get the "clear dustbin" message on robrorock s5 with Xiaomi Mi IO Binding
MQTT (tasmota - Sonoff) and WOL Rules
[SOLVED] Toggle switch for rule for Glade Plugins
[SOLVED] Openhab2 stable debian 10 MQTT Broker configuration
[SOLVED] Interfacing Options in openhabian-config
[SOLVED] OH 2.5 M1 to M3 update - encountered issues
[BTicino/OpenWebNet] New openHAB2 binding ready for testing
Zwave Difficulties
Broadlink rm pro openhab 433mhz
Items not visible in HABPanel
[SOLVED] Nightly build of binding?
Openhab Cloud Item
Switch working in Paper UI but not in SiteMap
Openhab + snips
Can't get Hue Motion rules to work
Help Required with Open Hab Setup
Openhab 2.4.0 stops updating
Sendmail not working (2.5.0.M2)
Homekit error message...!
Missing SNMP 2.x binding
Publish mqtt message
Installing latest IHC binding
[SOLVED] Qubino Smart meter ZMNHTD don't sending values
Rollershutter in Basic UI not driving up
How to migrate openhabian from Raspberry Pi 1 to 3B+?
Rollershutter in Basic UI not driving up
Control variable
Raspberry Pi 4 released
Error starting mqtt connection
RaspberryPi4 + Z-Wave Gen5 [OFFLINE - BRIDGE_OFFLINE]
OpenHab App Rollershutter control
PaperUI Channel Linking not working (Simple Mode on)
Still Cant Communicate with ZWave 2.5M1
[SOLVED] Can't link openhab with Google Home
[SOLVED] Config files (manual configuration of links)
Floorplan is not in the Habmin Dashboard
Whining about (non)functional status of OpenHab
Fibaro Smart Implant temperature sensors
AWS and OpenHAB
Systemstatus and counting request_nif for example
More ZWave Troubles 2.5M1
HUSBZB-1 Not showing and not supporting Openhab Rasberrypie
Temperature and humidity Generation chart failed
Ciao come si installa ad esempio org.openhab.binding.openwebnet grazie
KNX Binding
Zigbee, Z-Wave, HomeMatic, EnOcean
DHT22 Temperatursensor lässt sich nicht anlernen
New user with high fan speed
How to get started (there is no step-by-step tutorial)
How to get Digi XStick Working
How to connect IP150 to OpenHAB?
Zigbee to Knx
Google Assistant (Thermostat Issue)
The ideal openHab lighting setup
Switch from raspberry pi 2 to raspberry pi 3
OHv2: Machine running OHv2 hangs w/o warning after 4 to 6 weeks
Where is the pi rc switch binding gone
Raspberry Pi - Make serial USB ports persistent via symlinks
Qubino GOAP 3-Phase Meter and the BICOM432-40-WM1
Multiple panel, Ethernet dedicated router, server setup
[SOLVED] Could not cast wattage to DecimalType or Number for comparison?
[SOLVED] [Fibaro Smoke Sensor] Problem with temperature monitoring intervals
ESPEasy Firmwear Binding OpenHAB
Ikea Tradfri Color bulb: cannot set hue instead of colorXY
Openhabian error during installation of PLClogo binding
Need help for my first Sonoff Power Switch
NeoCoolcam Zwave devices not reporting data
[SOLVED] To mofidy the BLINDS icon
Corrupt FileSystems every 2-3 month?
Issue with Robonect Binding
How to upgrade Z-Wave plugin but keep rest of OH intact?
Z-Wave canceled frames
Run command with rule on service stater to tasmota
[bug] OpenHAB3 M5 memory leak
HELP! Someone Hacked my system? Lights and other turning on and off randomly. OH3 Snapshot
GoogleHome, PaperUI Items & Items Files
OH 2.4, MQTT, H801 device and Espurna
[SOLVED]How does a dimmer work?
KNX: Heating System
Help wanted to control Raspberry pi output with Maxcube thermostates and rules
[SOLVED] - Change C to F in Openweathermap
[Solved] Binding OrangeTV (Samsung UHD 90)
Making something actually happen with switches
OH 2.4 M4 / M5 rule execution stops
How to add a secondary controller for Zwave binding?
Absoluter Neuling mit openHAB-Regeln
HUE Emulator don't work any more
How to use channels correct
Secure login and different account
How to file an Issue
[ASK] How to start?
[SOLVED] Failed installing 'openhab-ui-basic, openhab-ui-classic, openhab-ui-paper'
Telegesis ETRX3 offline communication error
Directions for openHAB 3
[SOLVED] What am I doing wrong with zwave?
Error after selecting UI
[Solved] Problem with mosquitto in raspbian
Yeelight wonder LED bulb loses connection
Problem whith knx bindings
Strange forum and stupid user (me)
Unknown error
[SOLVED] Help with Yamaha binding and manual thing/item configuration
[SOLVED] Yeelight color flowing
MAPDB, persisted value not repopulating after restart
[SOLVED] How to create a Timer to switch off a light?
Newbie here. trouble connecting through app
New meteoblue binding - no icon
IFTTT presence applet
CalDav not working with all-day events?
Cheap Zigbee hub
How to make "smarter" a wired aircon remote
Maximum number of DatagramSockets reached
Homekit lamps not dimming
Getting OpenHAB to switch a LED
OpenHAB 2, HomeKit and Sonos
[CLOSED] "Introduction" in docs: proposed rewrite
[SOLVED OH2 performance tuning
My Rollershutter is not working
[SOLVED] Rule with sendHttpGetRequest not working
HabPanel: Button widget not updating
Sonoff RF BRIDGE with Tasmota - correct config with OH2
[SOLVED] Calculating windchill
Paper UI, Control Tab not working
Openhab restart periodic
[SOLVED] OpenHAB 2.4 Binding homematic ON_TIME
Cannot find Somfy Tahoma Binding on my installation
MQTT2 Switch Item not working
Trouble in different places
Stability of myopenhab & google home for everyday use
Offline Voice Control integration in openhab with multiple microphone
OH1 to OH2 migration - Z-Wave devices?
Unable to scan for zigbee devices
[SOLVED] KNX - 'general off' command
Push notifications issue
Exception on rollershutter item
Zwave: Philio Technology: PAT02-B Z-Wave room sensor not or slow updating channels
Openhabian does not work anymore and can not get it to work anymore
Rollers shutter control with tasmota sonoff 4ch pro r2
[Confirmed not fully functional]Network binding 2.4 does not work
Zwave Dongle Serial Port
Openhab don't link in Google Assistant
Rule change has an stop of openHAB UI and logs as consequence
[SOLVED] Cannot attach a Z-wave controller
CPU usage with openHAB 2.4
Broadlink with MQTT in Openhab
Cannot link item to Chromecast Artist channel with PaperUI
[SOLVED] OpenHab is not updating item's values after blackout
<solved>Help with rule for heating or humidifier
[SOLVED] Connection refused
Rule takes 3 Seconds from state to be executed
New modbus binding config problems
Network Binding not finding anything
Which built-In Roller shutter
Simplified Jython rule definition (similar to Rules DSL) using a universal decorator
Newbee: openHAB 2 tail shows MysqlPersistenceService error
Ubuntu Server 18.x crashes when shutting down the system
[SOLVED] How to publish to mqtt topic with jython
Addon Button will appear after several minutes
Cant connect to openhabianpi:8080 on some computers
Somfy Tahoma and OpenHAB2
Coolmasternet and Daikin A/C
Google Home with Sonos
Read JSON and show it
Tradfri - Communication error
Fibaro motion sensor FGMS001 Gen5 (Zwaveplus)
[SOLVED] Problem with fibaro FGR222
[SOLVED] Rules conflicting each other
[SOLVED] Persistence with InfluxDB not storing data?
Aeon Labs Multisensor 6, suddenly no longer detected, and not in database
Zwave - ZW074
Configuration with Alexa Echo Dot
[SOLVED] Please help me configuring Sonoff Basic with MQTT (Mosquitto) and openHAB [Solved]
Surface mounted thermostat to control floor heating
Problems using Cron in a rule
Strange behavior google home
FGBRS-001 standalone
openHAB on orange pi zero?
[SOLVED] Aeotec Multicolor Bulb 6
Openhab Hue Emulation gone
[SOLVED] Curious Error Messages in LogTail
Xiaomi MI Home Security Camera power on - off
Stuck on Zulu 11
[SOLVED] My Exec commands do not work
Display Temp an Humidity from DHT11 installed on Wemos D1 mini with Tasmota
Rules are not performed after some uptime
[SOLVED] No Connection to openhabian after clearing cache
[SOLVED] Guidance on setting password protected page for openhab
[Philips Hue] Register new dimmer switch as thing
Milight Binding ok but lamp doesn't switch
PaperUI Control tab - Cards are not aligned well
[SOLVED] Z-Wave: cannot remove "phantom" devices
[SOLVED] Trouble removing (deleting, excluding) previous ZWave devices that I paired to Nortec HUSBZB-1 USB controller
[SOLVED] [MQTTv2] MqttBroker connection configuration faulty: host : You need to provide a hostname/IP!
Aqara Hub v3 Developer Key?
I like to know about forum page URL
Lifecycle of an item
[SOLVED] Question integrity of SD card to save data
[SOLVED] Question integrity of SD card to save data
Setpoint design on desktop/habdroid
Visualize data in openhab panel's widget
Alarm clock of squeezebox radio for OH
openHAB with elevator
Ecobee thermostat invalid grant in windows 10
[SOLVED] I see no HABPanel
Set brightness of LED using Siri/HomeKit
Problems with rules
[SOLVED] Integrating openhab and google assistant
Calculating totalpower in a rule
[SOLVED] Insteon USB HUB unable to connect on /dev/ttyUSB0
[SOLVED] Insteon USB HUB unable to connect on /dev/ttyUSB0
Aeotec Nano Shutter configuration problems
[SOLVED] Insteon USB HUB unable to connect on /dev/ttyUSB0
MQTT Stopped Working HELP!
Log:tail stops after +/- 10 min (solved)
Serverruntime - I/O error has occurred (cause unknown)
Could use some help with regex
[SOLVED] Google Home New Devices
Openhab2 rest api security
Enigma2 sitemap
openHAB Backup Concept
Rule is triggering two times in a row
Again backup - HOWTO
ISM8i or ISM7i together with CHA?
I broke sudo while installing Zigbee2Mqtt
Integer Divide
Installation fails: Failed to start /etc/rc.local Compatibility
Log in on the Docker SSH console with sudo
IPCamera: Blank ImageUrl
Influx db - data lost after reboot!?
Modbus 1.x to 2.x
RRD4j stops writing Data and Stuck at restart
JSscripting: Error message "Java.lang.OutOfMemoryError: Java heap space"
FYI: OH.3.2 RC - Unexpected exception occurred while processing REST request
I can control a relay via rule, but not via Paper UI
OH3 Persisting Items using rrd4j service on Raspberry Pi on a memory stick

I would reframe the first title to:

Community forum is NOT a commercial helpdesk


If I were to change the title it would be something like “How to Help Yourself”, but honestly I think the title fits just fine.:+1:

One of the biggest reasons I visit the forum each day is to help others. Do I get frustrated sometimes, having to ask the same basic questions, sure I do. It’s just one of those things I have to accept and press on.

I don’t always have the answer,:smile: and I’m far from being able to explain things like @vzorglub, @rlkoshak, @Dim, @Udo_Hartmann, etc…, but it’s a great feeling when my small contribution does help.:sunglasses:

We have a great community, keep up the hard (and sometimes redundant,:laughing:) work!

Thanks to all.


Maybe “Help Us Help You” :smiley:

You’ll get there with time. Sometimes its hard to see how far one has come themselves. You are doing great and it is appreciated!


I like it.:grinning: Can we have a multi title?:rofl:

Thanks for the kind words.:smiley:

It’s always nice to know, however small the contribution may be, it doesn’t go unnoticed.
You’ve always done a great job at pointing this out, not just me, for everyone.

Thanks again.


I love ““Help Us Help You”


Some forums allow for much of this info to appear in posters signature.
An idea for this forum as well?


There is no signature on this forum, but you can fill you account info with this sort of data


And how to link to that so that only that info is shown?
I only found an About me entry in my profile preferences.
Is that accessible to others? TestMe

1 Like

If you click the persons picture once, then click on the picture again it will show what the user has entered in their “About me” profile. Try it out, click my image then click on it again and you should see my profile.

EDIT: I just click my own picture once and was able to see the “About me” profile.:laughing:

1 Like

Now I need to figure out what to write there :open_mouth:

@H102 nice reading stats!

1 Like

IMHO, that’s a great place to enter your platform, OH version, etc… If everyone did something similar that could be a good way to prevent asking each person the same (some of the same) basic questions.:wink:

1 Like

My point exactly! :slight_smile:

1 Like

Yes, my eye’s bleed sometimes.:rofl:

All we can do is try, and maybe start a trend that benefits everyone.:sunglasses:

EDIT: Just edited my profile to highlight my OH setup and some devices used. I thought about adding all binding used but not sure if that’s needed, I’ll think on that some more.:thinking: Perhaps @vzorglub has some input, or a good template, to keep it standard across the board?

1 Like

Look at mine. Not much. Just the essential.
This is not really practical for helping users, especially new users. As a helper, I don’t want to click to another page to find out the background.
I want to see the person needing help making an effort and not expecting to be spoon fed everything


I was thinking more along the lines of using this as a way to help the helper. For someone who types slow, like myself,:stuck_out_tongue_winking_eye: it’s easier/faster to make a few clicks.
This could also reduce the amount of typing for the user asking the question, assuming there will be more than a single question, especially the slow fingered users (like me again,:smile:).

I agree 100% I’m just trying to view it from both sides, hoping to find a happy medium.


1 Like

Could you please add a screenshot of this?

1 Like



I’ve added no. 4 and 11

1 Like